Clear One CHAT 150 User manual

Quick-Start Guide
CHAT®150
USB SPEAKERPHONE

CHAT 150 USB SPEAKERPHONE
i
CONTACT INFORMATION
Headquarters
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
US: +1.801.975.7200
International: +1.801.975.7200
Aura Sales
US: +1.888.HEY.AURA
International: +1.801.975.7200
[email protected]
Aura Tech Support
US: +1.888.HEY.AURA
International: +1.801.975.7200
[email protected]
Caution: Read the safety information in the instruction manual.
U.S. PATENTS: D539,274; D556,189; D531,999.
OTHER PATENTS PENDING.
NOTICES
© 2021 ClearOne All rights reserved.
Information in this document is subject to change without notice.
Document number QSG-0126-002v1.1 February 2021

ii
CONFIGURING THE CHAT 150..................................................... 1
CHAT 150 FEATURES ................................................................... 2
CONNECTING YOUR CHAT 150 .................................................. 3
ConneCting the ChAt 150 to APC
................................................. 3
CONFIGURING AND TESTING YOUR CHAT 150......................... 4
ChAt 150 Audio ConfigurAtion
....................................................... 4
ChAtAttACh™: ConneCting two ChAt deviCes
.............................. 5
USING THE CHAT 150................................................................... 6
ChAt 150 Led indiCAtors
............................................................... 6
voLume & mute Buttons
.................................................................. 6
CHAT 150 SPECIFICATIONS AND REQUIREMENTS .................. 7
system requirements
....................................................................... 7
ConneCtions
.................................................................................... 7
Audio
............................................................................................... 7
sPeAker
........................................................................................... 7
miCroPhone(s)
................................................................................. 7
Power
.............................................................................................. 7
ControLs
......................................................................................... 7
environmentAL
.................................................................................. 7
ProCessing
...................................................................................... 7
Line inPut/outPut viA vC BoB
.......................................................... 7
meChAniCAL
...................................................................................... 7
ComPLiAnCe
...................................................................................... 7
modeL numBers
............................................................................... 7
Table of Contents

CHAT 150 USB SPEAKERPHONE
1
CONFIGURING THE CHAT 150
The CHAT 150 can be used right out of the box and there’s no software
to download or install if it is to be used only with a PC.
CHAT 150 FEATURES
Figure 1. CHAT 150 Features
Important! CHAT devices are designed to work on flat, stable surfaces
with no obstructions. For best results, do not hold or move the device
while in use.

QUICK-START GUIDE
2
CONNECTING YOUR CHAT 150
The following describes how to connect your CHAT 150 to a PC.
The CHAT 150 can also be connected to a number of other devices. For
information on connecting the CHAT 150 to other devices, refer to the
CHAT 150 User’s Manual.
ConneCting the ChAt 150 to APC
Use the included USB 2.0 cable to connect the CHAT 150 to your PC
(Figure 2).
Figure 2. Connecting to a PC

CHAT 150 USB SPEAKERPHONE
3
CONFIGURING AND TESTING YOUR CHAT 150
ChAt 150 Audio ConfigurAtion
The CHAT 150 derives its audio settings from the Windows sound
settings if it is attached to a PC or through the 3rd party application’s set-
tings (COLLABORATE Space, Zoom, Microsoft Teams, Skype, etc.)
Consult the CHAT 150 User’s Manual for advanced device configuration
procedures if needed.
USING THE CHAT 150
ChAt 150 Led indiCAtors
The three microphone LED indicators illuminate blue when the CHAT
150 microphones are active. The indicators illuminate red when the
microphones are muted.
The seven volume LED indicators illuminate blue to indicate the current
volume setting—more lights indicate higher volume.
VoLume & mute Buttons
Use the Volume Up/Down buttons (indicated by a large dot and a small
dot) to adjust the volume level of the CHAT 150. Holding down either
button will change the volume rapidly.
Use the Mute button to mute the CHAT 150’s microphone until the Mute
button is pressed again. If you are using the CHAT 150 with a PC, you
can also use the Speaker Volume Control in Windows, as well as the
CHAT software to adjust the volume and mute the microphone.

QUICK-START GUIDE
4
System Requirements
Microsoft Windows 7 or later
MacOS X v10.10 “Yosemite” or later
Connections
USB:
2.0 Compatible, Type: Mini-B Female
RJ-45: Keyed 8-conductor
Audio
Speaker
Bandwidth: 190 Hz – 20 kHz
Maximum Output Level:
85 dB SPL @ 1 foot (0.30 meter)
Microphone(s)
Bandwidth: 50Hz – 7.75 kHz
Power
USB:
5 VDC @ 500mA Maximum
External:
100 - 240 VAC Input, 9 VDC @ 560 mA
Output, Tip: Power, Ring: Ground
Controls
Volume Up
Volume Down
Microphone Mute
Environmental
Operating Temperature:
41 - 104° F (5 - 40° C)
Processing
Full Duplex
Distributed Echo Cancellation
(D. E. C.)®
Noise Cancellation (NC)
Automatic Level Control (ALC)
Line Echo Cancellation (LEC) -
Selectable
First Mic Priority
Mechanical
Dimensions (W x D x H):
7.4” x 7.4” x 1.8”
(18.8 cm x 18.8 cm x 4.6 cm)
Weight: 1.17 lbs (0.53 kg)
Compliance
RoHS
FCC Class A Part 15
ICES-003, CE, UL Listed
Model Numbers
AUR-156-200 CHAT 150 USB
SPECIFICATIONS AND REQUIREMENTS