Clear One CHAT 150 User manual

CHAT®150 Group Speaker Phone
Quick Start Guide

CONFIGURING THE CHAT 150..........................................1
CONNECTING YOUR CHAT 150 .......................................2
Co n n e C t i n g t h e ChAt 150 t o APC...................................... 2
CONFIGURING AND TESTING YOUR CHAT 150..............3
ChAt 150 Au d i o Co n f i g u r A t i o n ........................................... 3
ChAtAt t A C h ™: Co n n e C t i n g tw o ChAt de v i C e s ................... 4
USING THE CHAT 150........................................................5
ChAt 150 Led in d i C A t o r s ................................................... 5
vo L u m e & mu t e Bu t t o n s ....................................................... 5
CHAT 150 SPECIFICATIONS AND REQUIREMENTS .......6
sy s t e m re q u i r e m e n t s ............................................................ 6
te C h n i C A L sPeCifiCAtions ....................................................... 6
usB..................................................................................... 6
Lo u d s P e A k e r ......................................................................... 6
mi C r o P h o n e (s)...................................................................... 6
Po w e r .................................................................................. 6
te C h n i C A L su P P o r t ................................................................ 7
Table of Contents

QUICK START GUIDE
1
CONFIGURING THE CHAT 150
The CHAT 150 can be used right out of the box and there’s no software
to download or install if it is to be used only with a PC.
If the CHAT 150 is to be used with any other device or if the CHAT 150
firmware requires updates, follow the instructions in the CHAT 150 User’s
Manual to setup and configure the CHAT 150.
The latest version of the software and CHAT 150 User’s Manual can be
found on the ClearOne Website at:
http://www.clearone.com/support/downloads.php?content=main
Scroll down the page to the CHAT 50/150 section and click the relevant
links.
Follow the instructions in the manual to install and configure the CHAT
150 device.

CHAT 150 Group Speaker Phone
2
CONNECTING YOUR CHAT 150
The following describes how to connect your CHAT 150 to a PC.
The CHAT 150 can also be connected to a number of other devices. For
information on connecting the CHAT 150 to other devices, refer to the
CHAT 150 User’s Manual.
Co n n e C t i n g t h e ChAt 150 t o APC
Use the included USB 2.0 cable to connect the CHAT 150 to your PC
(Figure 1.0).
Figure 1 - Connecting to a PC

QUICK START GUIDE
3
CONFIGURING AND TESTING YOUR CHAT 150
Consult the CHAT 150 User’s Manual for all device and software configu-
ration procedures as needed.
ChAt 150 Au d i o Co n f i g u r A t i o n
To ensure optimal sound quality, the CHAT 150 MUST be tuned properly
prior to use or after the device has been moved. The CHAT 150’s audio
settings must also be customized for the specific application it is to be
used with and for the specific device it is to be connected to.
The CHAT 150 derives its audio settings from the Windows sound set-
tings if it is attached to a PC or through the 3rd party appplication’s set-
tings (Skype, Yahoo, etc.) Refer to the tuning procedures in the Optimiz-
ing Sound Quality section in the CHAT 150 User’s Manual or consult
the specific 3rd party application’s tuning adjustments.
For further details on configuring various devices for the CHAT 150 audio
settings, refer to the CHAT 150 User’s Manual.

CHAT 150 Group Speaker Phone
4
ChAtAt t A C h ™: Co n n e C t i n g tw o ChAt de v i C e s
The CHATAttach accessory allows two CHAT devices to be connected
together for use in larger conference settings.
Certain restrictions and requirements must be met in order to use the
CHATAttach accessory. For a complete list and detailed instructions,
consult the CHATAttach or the CHAT 150 User’s Manual.
Attach the specially keyed CHATAttach cable to both CHAT 1501.
devices (Figure 2.0).
Plug the power supply into the power source.2.
Connect the female/male ends of the power cable together.3.
Place the CHAT 150 units at least 5’ apart.4.
Figure 2 - CHATAttach Connection

QUICK START GUIDE
5
USING THE CHAT 150
ChAt 150 Led in d i C A t o r s
The three microphone LED indicators illuminate blue when the CHAT 150
microphones are active. The indicators illuminate red when the micro-
phones are muted.
The seven volume LED indicators illuminate blue to indicate the current
volume setting—more lights indicate higher volume.
vo L u m e & mu t e Bu t t o n s
Use the Volume Up/Down buttons (indicated by a large dot and a small
dot) to adjust the volume level of the CHAT 150. Holding down either but-
ton will change the volume rapidly.
Use the Mute button to mute the CHAT 150’s microphone until the Mute
button is pressed again. If you are using the CHAT 150 with a PC, you
can also use the Speaker Volume Control in Windows, as well as the
CHAT 150 software to adjust the volume and mute the microphone.

CHAT 150 Group Speaker Phone
6
CHAT 150 SPECIFICATIONS AND REQUIREMENTS
sy s t e m re q u i r e m e n t s
Microsoft Windows XP SP2, Vista or 7
te C h n i C A L sP e C i f i C A t i o n s
USB
USB 2.0 Compatible
USB Connector: Type B
USB Cable, Black
Loudspeaker
Bandwidth:
190Hz – 20kHz
Maximum Output Levels:
85dB SPL @ 1 meter
Microphone(s)
Bandwidth: 100Hz – 12kHz
Power
USB-powered: 5 VDC @ 500mA Maximum

Caution: Read the Safety Information in
the instruction manual
te C h n i C A L su P P o r t
U.S. PATENTS: D539,274; D556,189; D531,999.
OTHER PATENTS PENDING.
© 2010 ClearOne Communications, Inc. All rights reserved.
Information in this document is subject to change without notice. 800-156-202 Revision 2.0 June 2010
TELEPHONE [phone]
1.801.974.3760
FAX [phone]
Email [email protected]