Clear Touch 6000K Series User manual
Panel Quick Start
Guide
6000K Series Panel
Power
The Power button will be solid red when
the panel is turned off.
The Power button will be solid blue when
the panel is on.
The Power button will
flash from red to blue when in
sleep mode
. Simply tap on the screen to wake it up.
If there is
no light,check the master Power Switch
located underneath the panel, next to the power
chord.
1.
Click the Android Slide Out Toolbar located on
either side of the Panel.
2.
Choose Settings (Last icon on the bottom).
Note:
You an also use swipe up on the screen right
above the Clear Touch Logo on the middle of the
frame to get the input window.
3.
Tap the desired input (PC or Android).
Your new Clear Touch Panel has several inputs. This means that you can easily switch from PC to
Androidor any other source connected
The Android Quick Access Toolbar
can be accessed from either
Windows or Android.
Use these tools throughout your
lesson for quick access to a
Whiteboard, for temporary mark-
ups, and additional tools such as
Zoom, Spotlight, and Timer.
Icon
Use
Quick Access Toolbar
Located on either side of the panel, click to expand.
Back (Android OS Only)
Clicking this returns you to the previous screen.
Home
Returns you to the Home Screen on Android.
AppSelector
(Android OS Only)
Allows you to view or close any apps running on Android.
Canvas App (Android)
Opens a basic whiteboard App on Android.
Annotation
Easily mark
-up anything displayed onthe Clear Touch screen.
Freeze&Zoom
Freezes the screen so you can Zoom in (pinch/zoom gestures).
Toolbox
Access additional tools, such as a Spotlight and Timer.
Settings (Change Input)
Brings up the window to change input.
•Use the Red Button to disable touch
and any physical buttons.
•The Green Button will lock the power,
home, setting and volume buttonson
the panel
•The Yellow Button turns on Sidney
and LA time clocks.
•The Blue Button takes a screen shot of
whateveris on the screen so you can
pinch and zoom in.
•Use a microfiber cloth or use a glass cleaner or
mild cleaning solution to clean the Clear Touch
Interactive® Digital Display Screen.
•Apply solution onto a clean soft cloth, then
wipe the surface. Use a circular motion to
avoid smudges and streaks.
•Do NOT apply the cleaning solution directly
onto the Clear Touch Interactive® Digital
Display screen may damage the unit.
•Do NOT use any chemical solvents such as
Acidic, Alkali solutions, ammonia, or bleach.
Cleaning the CTI Panel
Remote Control
Allows users to project content wirelessly, Collage comes built into each
Clear Touch™panel and is device-agnostic.
Connecting a device
1. Open Clear Touch Collage
2. If needed download the Collage App onto the
connecting device.
3. Once the app is downloaded input the Collage
Device Code.
4. Up to six devices can cast to the ClearTouch panel.
Other manuals for 6000K Series
1
Table of contents
