AXIOMTEK GOT815-834 User manual

GOT815-834
15”XGA TFT
Touch Panel Computer
User’s Manual
IP69K certification distinguishes the highest level
of reliability

ii
Disclaimers
This manual has been carefully checked and believed to contain accurate
information. Axiomtek Co., Ltd. assumes no responsibility for any infringements of
patents or any third party’s rights, and any liability arising from such use.
Axiomtek does not warrant or assume any legal liability or responsibility for the
accuracy, completeness or usefulness of any information in this document. Axiomtek
does not make any commitment to update the information in this manual.
Axiomtek reserves the right to change or revise this document and/or product at any
time without notice.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.
Copyright 2015 Axiomtek Co., Ltd.
All Rights Reserved
Mar 2015, Version A1
Printed in Taiwan

iii
Safety Precautions
Before getting started, please read the following important safety precautions.
1. The GOT815-834 does not come equipped with an operating system. An
operating system must be loaded first before installing any software into the
computer.
2. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in
any static-shielded devices. Most electronic components are sensitive to static
electrical charge.
3. Disconnect the power cord from the GOT815-834 before any installation. Be
sure both the system and external devices are turned OFF. A sudden surge of
power could ruin sensitive components that the GOT815-834 must be properly
grounded.
4. The brightness of the flat panel display will be getting weaker as a result of
frequent usage. However, the operating period varies depending on the
application environment.
5. Turn OFF the system power before cleaning. Clean the system using a cloth
only. Do not spray any liquid cleaner directly onto the screen. The GOT815-834
may come with or w/o a touchscreen. Although the touchscreen is chemical
resistant, it is recommended that you spray the liquid cleaner on a cloth first
before wiping the screen. In case your system comes without the touchscreen,
you must follow the same procedure and not spray any cleaner on the flat panel
directly.
6. Avoid using sharp objects to operate the touchscreen. Scratches on the
touchscreen may cause malfunction or internal failure to the touchscreen.
7. The flat panel display is not susceptible to shock or vibration. When assembling
the GOT815-834, make sure it is securely installed.
8. Do not open the system’s back cover. If opening the cover for maintenance is a
must, only a trained technician is allowed to do so. Integrated circuits on
computer boards are sensitive to static electricity. To avoid damaging chips
from electrostatic discharge, observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted portion of
the system unit chassis for a few seconds. This will help to discharge any
static electricity on your body.
When handling boards and components, wear a wrist-grounding strap, available
from most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd. IBM, PC/AT, PS/2, VGA are
trademarks of International Business Machines Corporation.
Intel®and Atom™are registered trademarks of Intel Corporation.
MS-DOS, Microsoft C and Quick BASIC are trademarks of Microsoft Corporation.
VIA is a trademark of VIA Technologies, Inc.
SST is a trademark of Silicon Storage Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.Other brand names and
trademarks are the properties and registered brands of their respective owners.

iv
Table of Contents
Disclaimers......................................................................................................i
Disclaimers.....................................................................................................ii
Safety Precautions........................................................................................iii
CHAPTER 1 Introduction............................................................1
1.1 General Description....................................................................1
1.2 Specifications..............................................................................2
1.2.1 Main CPU Board................................................................................................. 2
1.2.2 I/O System .......................................................................................................... 2
1.2.3 System Specification........................................................................................... 3
1.3 Dimensions..................................................................................4
1.4 I/O Outlets....................................................................................5
1.5 Package List................................................................................6
CHAPTER 2 System Configurations ..........................................7
2.1 I/O Pin Assignment .....................................................................7
2.1.1 Serial Port Interface............................................................................................ 7
2.1.3 Ethernet .............................................................................................................. 8
2.2 Water-proof Cables.....................................................................9
2.2.1 Power cable ........................................................................................................ 9
2.2.2 Power adapter for GOT815-834 ....................................................................... 10
2.2.3 COM.................................................................................................................. 10
2.2.4 USB cables ....................................................................................................... 11
2.3 Mounting Method ......................................................................11
2.3.1 VESA mounting................................................................................................. 11
2.3.2 VESA-ARM Mounting........................................................................................ 12
CHAPTER 3 AMI BIOS Setup Utility.........................................13
3.1 Navigation Keys ........................................................................13
3.2 Main Menu..................................................................................14
3.3 Advanced Menu.........................................................................15
3.4 Chipset Menu.............................................................................24
3.5 Security......................................................................................27
3.6 Boot Menu..................................................................................28
3.7 Save&Exit...................................................................................29
CHAPTER 4 Drivers Installation...............................................31
4.1 System .......................................................................................31
4.1.1 Win 7................................................................................................................. 31
4.1.2 Win 8/8.x........................................................................................................... 32
4.2 Touch Screen ............................................................................33
4.2.1 Specification...................................................................................................... 33
4.2.2 Driver Installation- Windows 7/8.x .................................................................... 33
4.3 Embedded O.S...........................................................................35
4.3.1 WES 7 & WE8S................................................................................................ 35

GOT815-834 User’s Manual
Introduction
1
CHAPTER 1
Introduction
This chapter contains general information and detailed specifications of the GOT815-
834. Chapter 1 includes the following sections:
General Description
Specification
Dimensions
I/O Outlets
Package List
1.1 General Description
The GOT815-834 is a fan-less and compact-size touch panel computer, equipped
with a 15”XGA TFT LCD display and low power consumption Intel○RAtomTM E3827
1.75GHz processor. The GOT815-834 supports Windows®7, Windows®CE.NET and
Windows®embedded OSs. The panel computer is able to install a CFast™and
provided a Mini card slot for extension such as WIFI. Its excellent ID and friendly
user interface make it a professional yet easy-to-use panel computer. The GOT815-
834 is an ideal for space-limited applications in food and beverage industry.
GOT815-834: 15”TFT XGA Fanless Touch Panel Computer
Reliable and Stable Design
The GOT815-834 adopts a fanless cooling system and a CFast™, which
makes it suitable for vibration environments.
Embedded O.S. Supported
The GOT815-834 not only supports Windows®7 and Windows®8/8.1,, but
also supports embedded OS, such as Windows®CE.NET, and Windows®
7/8/8.1 embedded. For storage device, the GOT815-834 supports CFast™
or mSATA and 2.5”SSD device.
Industrial-grade Product Design
The GOT815-834 has an incredible design to be used in different industrial
environments.
The whole enclasure meets the IP66 standard.
For connecting other devices, the GOT815-834 also features several
interfaces: USB, Ethernet, and RS-232/422/485.

GOT815-834 User’s Manual
Introduction
2
1.2 Specifications
1.2.1 Main CPU Board
CPU
Intel®AtomTM E3827 1.75GHz processor onboard
System Memory
One 204-pin DDR3L(1.35V) SO-DIMM socket
Maximum memory up to 8GB
BIOS
America Megatrends BIOS
1.2.2 I/O System
Standard I/O
2 x RS-232/422/485(default RS-232)
4 x USB 2.0 (M12 connector)
Ethernet
1 x Intel I210IT Gigabit Ethernet
Expansion
2 x Mini PCI-E card
Storage
1 x CFast slot or mSATA
1 x SATA interface

GOT815-834 User’s Manual
Introduction
3
1.2.3 System Specification
12.1”TFT LCD
15”XGA 420nits
Heat Dispensing Design
Disk drive housing
One 2.5”SATA drive (optional)
Net Weight
5.2Kgs (11.46 lb)
Dimension (Main Body Size)
382mm x 305mm x 55mm
Operation Temperature
-20℃to 55℃
Relative Humidity
10% to 90% @ 40℃, Non-Condensing
Vibration
5 to 500 Hz, 2.0 G for CFast or mSATA
5 to 500 Hz, 2.0 G for SSD
Note
1. All specifications and images are subject to change without notice.
2. The GOT815-834 is suited on serious environment; please choose the wide
temperature DRAM and SSD.
3. If the operation temperature is higher than 35 ℃ , the wide temperature
HDD is recommended to be used on the device.
4. If the operation temperature is higher than 45 ℃ , the wide temperature
CFast and SSD are recommended to be used on the device.
Warning: According the warrantee is adopt for the IP66 guarantee, please choose
CFast,SSD and RAM by Axiomtek, also please kindly don’t disassemble the
system by youself.

GOT815-834 User’s Manual
Introduction
4
1.3 Dimensions
This diagram shows you dimensions and outlines of the GOT815-834.

GOT815-834 User’s Manual
Introduction
5
1.4 I/O Outlets
Please refer to the following illustration for I/O locations of the GOT815-834.
No
Function
1
Backlight ON/OFF
2
Brightness Adjust
3
Power Switch(ATX)
4
DC power connector
5
COM1(configure RS422/485, default RS-232)
6
COM2(configure RS422/485, default RS-232)
7
Ethernet
8
USB2.0 ×2
9
USB2.0 ×2
4 5 6 7 8 9
1
2
3

GOT815-834 User’s Manual
Introduction
6
1.5 Package List
When you receive the GOT815-834, the bundled package should contain the
following items:
GOT815-834 x 1
Driver CD x1
DC cable x1
Power Adapter (optional)
Water-proof Power / USB / LAN / RS-232 cables (optional)
VESA ARM(optional)
If you can not find the package or any items are missing, please contact Axiomtek distributors
immediately.

GOT815-834 User’s Manual
System Configurations
7
CHAPTER 2
System Configurations
The GOT815-834 provides rich I/O ports and flexible expansions for you to meet
different demand, for example, CF. The chapter will show you how to install the
hardware. It includes:
I/O Pin Assignment
Hard Disk and DRAM
Wireless LAN Card (Optional)
Water-proof cables (Optional)
Hanging and VESA mounting (Optional)
2.1 I/O Pin Assignment
The GOT815-834 has two serial ports, COM1 and COM2 (RS-232/422/485, default
RS-232) , Ethernet, USB, and DC-in 9~36V connecter.
2.1.1 Serial Port Interface
The following table shows you the pin assignments of this connector:
Note
Each port +5V Maximum: 2A, +12V Maximum: 1A.
Warning: According the warrantee is adopt for the IP66 guarantee, please inform the COM1
setting when ordering, also please kindly don’t disassemble the system by
youself.
Pin
RS-232
RS-422
RS-485
1
DCD
TX-
Data-
2
RXD
TX+
Data+
3
TXD
RX+
No use
4
DTR
RX-
No use
GND
GND
GND
5
DSR
No use
No use
6
RTS
No use
No use
7
CTS
No use
No use
8
RI
No use
No use

GOT815-834 User’s Manual
System Configurations
8
2.1.2 Ethernet
The GOT815-834 is equipped with a high performance Plug and Play Ethernet
interface, full compliant with IEEE 802.3 standard, and can be connected with a M12
LAN connector.
Please refer to detailed pin assignment list below:
2.1.3 USB Port
The USB is a Universal Serial Bus (compliant with USB 2.0 (480Mbps)) connector on the
rear I/O. It is commonly used for installing USB peripherals such as keyboard, mouse,
scanner, etc.
2.1.4 DC Power Jack w/ M12 connector
Pin
Signal
Pin
Signal
L1
MDI0P
L5
MDI2P
L2
MDI0N
L6
MDI2N
L3
MDI1P
L7
MDI3P
L4
MDI1N
L8
MDI3N
Pi
n
Signal
Pin
Signal
1
USB VCC (+5V
level)
5
USB VCC (+5V
level)
2
USB #0_D-
6
USB #1_D-
3
USB #0_D+
7
USB #1_D+
4
GND
8
GND
Pin
Signal
1
+9~36V
2
+9~36v
3
GND
4
GND
5
Earth Gound

GOT815-834 User’s Manual
System Configurations
9
2.2 Water-proof Cables
GOT-800 series uses specific M12 connector for water-proof. Therefore you will
order each cable base on application.
There are four kind cables of GOT815, by the optional, if you will apply the USB,
COM or Etherent then you can select a cable for the package.
The Power cable included in the accessory box, when you will need the power
adapter, also it can be sesected by optional.
2.2.1 Power cable
Please follow pin assignement for the power input.
Pin
Signal
V+
DC 9~36V power input
Earth Ground
GND
GND
GND
GND

GOT815-834 User’s Manual
System Configurations
10
2.2.2 Power adapter for GOT815-834
If you order the power adapter, you should choose the power cord type for your
location. The power adapter is +24VDC(70W), 110-240V which is combined M12
connector.
2.2.3 COM
There are two COM cables which are combined M12 connector. Also, you can refer
2.1.1 for the Series port pin assignement.

GOT815-834 User’s Manual
System Configurations
11
2.2.4 USB cables
The USB cable is combined M12 connector for water-proof. It is extended two USB
ports for applicaton.
2.3 Mounting Method
There are two mounting ways for the GOT815-834. One is suspension, the other is
VESA mount.
2.3.1 VESA mounting
The GOT815 can accept VESA 100.

GOT815-834 User’s Manual
System Configurations
12
2.3.2 VESA-ARM Mounting
Step 1 Find out the 4 screws as marked on the back side of chassis.
Step 2 Assemble the VESA-ARM to the back side of the chassis, and fix the
screws.
Step 3 VESA mounting Installation completed.

GOT815-834 User’s Manual
AMI BIOS Setup Utility 13
CHAPTER 3
AMI BIOS Setup Utility
This chapter provides users with detailed description how to set up basic system configuration
through the AMIBIOS8 BIOS setup utility.
3.1 Navigation Keys
The BIOS setup/utility uses a key-based navigation system called hot keys. Most of
the BIOS setup utility hot keys can be used at any time during the setup navigation
process.
These keys include <F1>, <F2>, <F3>, <F4>, <Enter>, <ESC>, <Arrow> keys, and so
on.
Note
Some of navigation keys differ from one screen to another.
Left/Right
The Left and Right <Arrow> keys allow you to select a setup screen.
 Up/Down
The Up and Down <Arrow> keys allow you to select a setup screen or
sub-screen.
+
Plus/Minus
The Plus and Minus <Arrow> keys allow you to change the field value of a
particular setup item.
Tab
The <Tab> key allows you to select setup fields.
F1
The <F1> key allows you to display the General Help screen.
F2
The <F2> key allows you to load previous value
F3
The <F3> key allows you to Load Optimized Defaults.
F4
The <F4> key allows you to save any changes you have made and exit
Setup. Press the <F4> key to save your changes.
Esc
The <Esc> key allows you to discard any changes you have made and
exit the Setup. Press the
<Esc> key to exit the setup without saving your changes.
Enter
The <Enter> key allows you to display or change the setup option listed
for a particular setup item. The <Enter> key can also allow you to display
the setup sub- screens.

GOT815-834 User’s Manual
14 AMI BIOS Setup Utility
3.2 Main Menu
System Time/Date
Use this option to change the system time and date. Highlight System Time or System Date
using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the
<Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The
time is entered in HH:MM:SS format.

GOT815-834 User’s Manual
AMI BIOS Setup Utility 15
3.3 Advanced Menu
The Advanced menu allows users to set configuration of the CPU and other system
devices. You can select any of the items in the left frame of the screen to go to the
sub menus:
ACPI Settings
NCT6106D Super IO Configuration
NCT6106D H/W Monitor
CPU Configuration
IDE Configuration
LPSS & SCC Configuration
Security Configuration
For items marked with “”, please press <Enter> for more options.’
ACPI Settings
You can use this screen to select options for the ACPI Configuration, and change the value of
the selected option. A description of the selected item appears on the right side of the screen.

GOT815-834 User’s Manual
16 AMI BIOS Setup Utility
ACPI Sleep State
Allow you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend. Here are the options for your selection, Suspend disable and S3
(Suspend to RAM).