Crestron CT-1000 & LC-1000 Touchpanels
Operations Guide – DOC. 5813B Series 1000 Wall-Mounted Touchpanels •3
Leading Specifications for Series 1000 Touchpanel (Continued)
SPECIFICATION DETAILS
Screen Viewing Angles:
LC-1000 Y Dir. (X=0o): +50o(from top), -30o(from bottom)
X Dir. (Y=10o): +40o(from right), -40o(from left)
CT-1000 Y Dir. (X=0o): +50o(from top), -50o(from bottom)
X Dir. (Y=0o): +50o(from right), -50o(from left)
Touchscreen Resolution 240 x 320 pixels
Touchscreen Display Passive Matrix Grayscale LCD (LC-1000 only)
Passive Matrix Color LCD (CT-1000 only)
Touchscreen Illumination White LED Backlit (LC-1000 only)
Backlit Fluorescent (CT-1000 only)
Touchscreen Composition Analog Resistive Membrane
Operating Temperature 50° to 113°F (10° to 45°C)
Humidity 10% to 90% RH (non-condensing)
Dimensions & Weight Height: 4.77 in (12.10 cm)
Width: 4.86 in (12.34 cm)
Depth: 1.59 in (4.04 cm) - with faceplate
Weight: 0.54 lb (0.25 kg)
1 The latest versions can be obtained from the Downloads | Software Updates section of the Crestron
website (www.crestron.com). Refer to NOTE after last footnote.
2 Crestron 2-Series control systems include the AV2, CP2, CP2E, MP2, MP2E, PAC2, PRO2, and
RACK2.
3 CNX update files are required for either CNMSX-AV/Pro or CNRACKX/-DP. Filenames for CNX
update files have a UPZ extension and ST-CP files are in one EXE or zipped UPZ file. To avoid
program problems, make certain you are using the update file with the correct suffix letter (e.g., S,
V, W, X).
4 Extension requires a prefix specific to the touchpanel type. In DETAILS, projectname represents the
assigned project name, and xxxxxx represents a version number.
5 The exact audio capacity is influenced by the complexity of the control screens and the sampling of
the WAV files. A specific WAV file format is required: PCM, 8KHz, mono, 8 bit.
6 Use VT Pro-e to check program size prior to upload to avoid storage capacity problems.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers only. New users may be required to register to obtain access to certain areas
of the site (including the FTP site).
Physical Description
The 3.8-inch (9.7 cm) touch sensitive viewing screen is located on the front of the
Series 1000 touchpanel. The electronic hardware is housed in a high impact, molded
plastic enclosure, shown after this paragraph. A 4-pin network port is located at the
rear of the unit. A speaker is also located on the back of the unit to project sound
from the stored WAV audio files.
