Aplex ARCHMI-932P User manual

ARCHMI-932P
32”Intel 6th Gen. Core i5-6300U Fanless Industrial Compact Size Panel PC
User Manual
Release Date Revision
Oct. 2016 V1.0
®2016 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: [phone] Fax: [phone] URL: www.aplextec.com

ARCHMI-932P User Manual
1
Revision History
Reversion
Date
Description
1.0
2016/10/26
Official Version

ARCHMI-932P User Manual
2
Warning!________________________
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Disclaimer
This information in this document is subject to change without notice. In no event
shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this
document or in any related materials.
This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct
the interference.
Electric Shock Hazard –Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.

ARCHMI-932P User Manual
3
Packing List
Accessories (as ticked) included in this package are:
□Adaptor
□Driver & manual CD disc
□Other.___________________(please specify)

ARCHMI-932P User Manual
4
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Don‘t touch any components of this card when
the card is power-on. Always disconnect power when the system is not
in use.
◆Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.

ARCHMI-932P User Manual
5
Table of Contents
Revision History…………………………………………………………………………………………………….1
Warning!/Caution/Disclaimer..............................…………………………….……………………2
Packing List…………………………………….…………………………………………………....................3
Safety Precautions…………………………………………………..…..……………………....................4
Chapter 1 Getting Started
1.1 Features……..…………………..………………………...…………………………..7
1.2 Specifications…..………………...………………………………………………….7
1.3 Dimensions……..…………………....………………………………………...…...9
1.4 Brief Description of ARCHMI-932P. ..….…..……………………….……10
1.5 Installation of HDD………….…………..………..…...…………………..…..11
1.6 VESA Mounting……………….…………..………..…...…………………..…..12
1.7 Panel Mounting…..………….…………..………..…...…………………..…..12
Chapter 2 Hardware
2.1 Motherboard Specifications……....….….....…………………………....13
2.2 Features……………………………………...………….……………………………15
2.3 Hardware Installation…………………….……….…………………………...18
2.4 Jumper Settings……………………………..………..……………………..……23
2.5 Rear Panel I/O Ports…..…………………………………………….…………..33
2.6 I/O Connectors…………..………………………………………………………..39
Chapter 3 BIOS Setup
3.1 Overview………………………….....…...……..……...…………………………56
3.2 Insyde BIOS Setup Utility….…..…………..………………………………….58
3.3 Security…………….……………………………..…..………………………………72
3.4 Boot………………………………….…………………………….…………………...75
3.5 Exit……………………….……………………….………….………………………...78
3.6 Updating the BIOS……..…………………..……………….…………………..79
Chapter 4 Installation of Drivers
4.1 Intel(R) AtomTM SoC Chipset..……......……...………….………………84
4.2 Intel(R) VGA Chipset………….…………..………………………….……......86
4.3 Intel(R) LAN Driver.………..……………..…………………………..………...89

ARCHMI-932P User Manual
6
4.4 Realtek Audio Driver…………………....………………………………………92
4.5 USB 3.0 Driver……………………………..……………………………………….94
4.6 Framework 4.5.2….….………………….……………………………………….97
4.7 Intel Management Engine Driver………………………………………....99
4.8 IO Driver (For Windows 8 and Windows 10)……………………….102
Chapter 5 Touch Screen Installation
5.1 Windows 8.1/10 Universal Driver Installation for PenMount
6000 Series………..…………………………………………………………….…106
5.2 Software Functions……………………..……………………………………..112
Figures
Figure 1.1: Dimensions of ARCHMI-932P..……….……….………………………..….9
Figure 1.2: Front View of ARCHMI-932P……...………………………………………10
Figure 1.3: Rear View of ARCHMI-932P...………………………………………………10
Figure 1.4: ARCHMI-932P VESA Mounting.……………………….……………….…12
Figure 1.5: ARCHMI-932P Panel Mounting……………………...…………………..12
Figure 2.1: Motherboard SU173 Layout……..………………………………………..18

ARCHMI-932P User Manual
7
Chapter 1 Getting Started
1.1 Features
32”industrial compact size panel PC
Flat front bezel design and IP65 compliant front panel
Fanless design
Intel 6th Gen. Core i5-6300U CPU onboard
2 x SODIMM 204-pin DDR3L up to 16GB
90~264V AC ~50/60Hz power input
Projected Capacitive Touch
1.2 Specifications
ARCHMI-932P
System
CPU
Intel 6th Gen. Core i5-6300U processor onboard
Chipset
SoC
Memory
2 x SODIMM 204-pin DDR3L up to 16GB
IO Port
USB
2 x USB 3.0 type A
Serial/Parallel
1 x RS-232/422/485 DB-9, default RS-232, COM1
1 x RS-232/422/485 DB-9, default RS-232, COM2
Audio
1 x Audio Line Out
LAN
2 x GbE LAN RJ-45
Power
1 x 2-pin connector for power on/off button
1 x AC-in
Storage Space
Storage
2 x 2.5”SATA HDD bay for SATA HDD (Easy accessible)
Expansion
Expansion Slot
2 x internal Mini-PCIe slot full size
Display
Display Type
32”color TFT LCD
Max. Color
1920 x 1080
Contrast Ratio
3000: 1
Luminance (cd/m2)
500
Viewing Angle
178(H) / 178(V)

ARCHMI-932P User Manual
8
Backlight Lifetime
30,000 hrs
Touch Screen –Projected Capacitive Type
Interface
USB
Light Transmission
Over 90%
Power
Power Input
90~264V 50/60Hz AC
Power Consumption
MAX: 60W
Mechanical
Front Bezel
Flat Bezel design
Front Bezel Metal
Aluminum / Panel mounting
Rear Panel Metal
Aluminum / VESA mount 200 x 200
Chassis Color
RAL 9007
IP Rating
IP65 compliant front panel
Dimension
810 x 490 x 70 mm
Net Weight
16.5 Kg
Environmental
Operating
Temperature
0~50°C
Storage Temperature
-20~60°C
Storage Humidity
10 to 90% @ 40°C , non-condensing
Certification
CE / FCC Class A
Operating System
Support
Windows Embedded 8.1 Industry Pro,
Windows 10 IoT Enterprise 2015LTSB

ARCHMI-932P User Manual
9
1.3 Dimensions
Figure 1.1: Dimensions of ARCHMI-932P

ARCHMI-932P User Manual
10
1.4 Brief Description of ARCHMI-932P
ARCHMI-932P is a 32”industrial compact size panel PC which comes with flat
front bezel touch screen, IP65 compliant front panel, and fanless designed. It is
powered by Intel 6th Generation Core i5-6300U processor onboard, and supports 2 x
204-pin SODIMM DDR3L up to 16GB memory. The model supports 90~264VAC
~50/60Hz power input, and projected capacitive touch screen. Additionally,
ARCHMI-932P comes with a 32”color TFT LCD with resolution 1920 x 1080, and can
be VESA 200 x 200 mounted. The projected capacitive touch screen supports 7H
anti-scratch surface is ideal for use as PC-based controller for industrial automation &
factory automation.
Figure 1.2: Front View of ARCHMI-932P
Figure 1.3: Rear View of ARCHMI-932P

ARCHMI-932P User Manual
11
1.5 Installation of HDD
Step 1
There are 6 screws to deal with when
enclosing or removing the chassis.
Gently remove 6 screws.
Step 2
Taka the chassis out as the picture show.
Step 3
Unscrewing 4 screws in the HDD bracket,
then you can replace HDD or SSD from
here.

ARCHMI-932P User Manual
12
1.6 VESA Mounting
The ARCHMI-932P is designed to be VESA mounted as shown in Picture. Just carefully
place the unit through the hole and tighten the given screws from the rear to secure
the mounting.
Figure 1.4: ARCHMI-932P VESA Mounting
1.7 Panel Mounting
There are four holes located along the four sides of the HMI. Insert the clamp from
the four sides and tighten them with the nuts provided.
Figure 1.5: ARCHM-932P Panel Mounting

ARCHMI-932P User Manual
13
Chapter 2 Hardware
2.1 Motherboard Specifications
Specifications
System
Processor
6th Generation Intel® CoreTM Processors, BGA 1356
Intel® CoreTM i7-6600U Processor, Dual Core, 4M Cache, 2.6GHz (3.4GHz), 15W
Intel® CoreTM i5-6300U Processor, Dual Core, 3M Cache, 2.4GHz (3.0GHz), 15W
Intel® CoreTM i3-6100U Processor, Dual Core, 3M Cache, 2.3GHz, 15W
Intel® Celeron® Processor 3955U, Dual Core, 2M Cache, 2.0GHz, 15W
Memory
Two 204-pin SODIMM up to 16GB
Dual Channel DDR3L 1600MHz
BIOS
Insyde SPI 128Mbit
Graphics
Controller
Intel® HD Graphics GT Series
Features
OpenGL 5.0, DirectX 12, OpenCL 2.1
HW Decode: AVC/H.264, MPEG2, VC1/WMV9, JPEG/MJPEG, HEVC/
H265, VP8, VP9
HW Encode: AVC/H.264, MPEG2, JPEG, HEVC/H265, VP8, VP9
Display
1 x LVDS/eDP (eDP available upon request)
1 x HDMI/DP (DP available upon request)
1 x DP++
LVDS: dual channel 48-bit, resolution up to 1920x1200 @ 60Hz
DP: resolution up to 4096x2304 @ 60Hz
HDMI: resolution up to 2560x1600 @ 60Hz or 4096x2160 @ 24Hz
Triple
Displays
LVDS + HDMI + DP++
LVDS + DP + DP++ (available upon request)
eDP + HDMI + DP++ (available upon request)
eDP + DP + DP ++ (available upon request)
Expansion
Interface
1 x PCIe x4 (Gen 3)
1 x SIM
1 x Full-size Mini PCIe (PCIe/USB/SATA)
1 x Full-size Mini PCIe (PCIe/USB)
Audio
Audio Codec
Realtek ALC888S-VD2-GR
Ethernet
Controller
1 x Intel® I210AT PCIe (10/100/1000Mbps)
1 x Intel® I219LM PCIe with iAMT11.0 (10/100/1000Mbps) -
(only Core i7/i5 supports iAMT)
Rear I/O
Ethernet
2 x GbE (RJ-45)

ARCHMI-932P User Manual
14
USB
4 x USB 3.0
Display
1 x HDMI/DP (DP available upon request)
1 x DP++
Audio
1 x Line-out
1` x Mic-in
Internal I/O
Serial
2 x RS-232/422/485 (RS-232 w/ power) (2.0mm pitch)
2 x RS-232 (2.0mm pitch)
USB
2 x USB 2.0 (2.0mm pitch) + 1 x Vertical USB 2.0 (type A) -
(available upon request)
Display
1 x LVDS LCD Panel Connector
1 x LCD/Inverter Power
1 x eDP LCD Panel Connector (available upon request)
Audio
1 x S/PDIF
SATA
2 x SATA 3.0 (up to 6Gb/s)
2 x SATA Power
RAID 0/1/5
DIO
1 x 8-bit DIO
LPC
1 x LPC (supports LPC EXT-RS232/RS485 module)
SMBus
1 x SMBus
WatchDog
Timer
Output &
Interval
System Reset, Programmable via Software from 1 to 255
Seconds
Security
TPM
Available Upon Request
Power
Type
Wide Range 15~36V
Connector
DC-in Jack
Right Angle Connector (4-pin) (available upon request)
Vertical Type Connector (4-pin) (available upon request)
Consumption
SU173
Typical: 6600U:19V @ 0.48A (9.12Watt); 6300U:19V @ 0.43A (8.170Watt)
Max: 6600U:19V @ 1.05A (19.95Watt); 6300U:19V @ 0.90A (17.10Watt)
RTC Battery
Lithium 3V (210mAH)
OS Support
Microsoft
/Linux
Windows 7 (/WES7) 32/64-bit
Windows 8.1 (64-bit)
Windows 10 IoT Enterprise 64-bit
Debian 8 (with VESA graphic driver)
CentOS 7 (with VESA graphic driver)
Ubuntu 15.10 (Intel graphic driver available)
Environment
Temperature
Operating: 0 to 60°C
Storage: -40 to 85°C

ARCHMI-932P User Manual
15
Humidity
Operating: 5 to 90% RH
Storage: 5 to 90% RH
MTBF
SU173 : 347,511 hrs @ 25°C; 200,230 hrs @ 45°C ; 126,434 hrs @ 60°C
Calculation model: Telcordia Issue 2, Method I Case 3
Environment: GB, GC –Ground Benign, Controlled
Mechanical
Dimensions
Mini-ITX Form Factor
170mm (6.7”) x 170mm (6.7”)
Height
PCB: 1.6mm
Top Side: TBD, Bottom Side: TBD
2.2 Features
Watchdog Timer
The Watchdog Timer function allows your application to regularly “clear” the system
at the set time interval. If the system hangs or fails to function, it will reset at the set
time interval so that your system will continue to operate.
DDR3L
DDR3L is a higher performance DDR3 SDRAM interface providing less voltage and
higher speed successor. DDR3L SDRAM modules support 1600MHz for DDR modules.
DDR3L delivers increased system bandwidth and improved performance to provide
its higher bandwidth and its increase in performance at a lower power.
Graphics
The integrated Intel® HD graphics engine delivers an excellent blend of graphics
performance and features to meet business needs. It provides excellent video and 3D
graphics with outstanding graphics responsiveness. These enhancements deliver the
performance and compatibility needed for today’s and tomorrow’s business applications.
Supports 1 LVDS/eDP, 1 HDMI/DP and 1 DP++ interface for triple display outputs.
PCI Express
PCI Express is a high bandwidth I/O infrastructure that possesses the ability to scale
speeds by forming multiple lanes.

ARCHMI-932P User Manual
16
Serial ATA
Serial ATA is a storage interface that is compliant with SATA 1.0a specification. With
speed of up to 6Gb/s (SATA 3.0), it improves hard drive performance faster than the
standard parallel ATA whose data transfer rate is 100MB/s. The bandwidth of the
SATA 3.0 will be limited by carrier board design.
Gigabit LAN
Intel® I210AT PCI Express Gigabit Ethernet and Intel® I219LM with iAMT11.0 Gigabit
Ethernet Phy controllers support up to 1Gbps data transmission.
Wake-On-LAN
This feature allows the network to remotely wake up a Soft Power Down (Soft-Off)
PC. It is supported via the onboard LAN port or via a PCIe LAN card that uses the PCIe
PME (Power Management Event) signal. However, if your system is in the Suspend
mode, you can poweron the system only through an IRQ or DMA interrupt.
Wake-On-USB
This function allows you to use a USB keyboard or USB mouse to wake up a system
from the S3 (STR - Suspend To RAM) state.
RTC Timer
The RTC installed on the system board allows your system to automatically power-on
on the set date and time.
ACPI STR
Important:
The 5V_standby power source of your power supply must support
≥720mA.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB
ports, the 5V_standby power source of your power supply must support
≥1.5A. For 3 or more USB ports, the 5V_standby power source of your
power supply must support ≥2A.

ARCHMI-932P User Manual
17
The system board is designed to meet the ACPI (Advanced Configuration and Power
Interface) specification. ACPI has energy saving features that enables PCs to
implement Power Management and Plug-and-Play with operating systems that
support OS Direct Power Management. ACPI when enabled in the Power
Management Setup will allow you to use the Suspend to RAM function.
With the Suspend to RAM function enabled, you can power-off the system at once
by pressing the power button or selecting “Standby” when you shut down Windows®
without having to go through the sometimes tiresome process of closing files,
applications and operating system. This is because the system is capable of storing
all programs and data files during the entire operating session into RAM (Random
Access Memory) when it powers-off. The operating session will resume exactly
where you left off the next time you power-on the system.
Power Failure Recovery
When power returns after an AC power failure, you may choose to either power-on
the system manually or let the system power-on automatically.
USB
The system board supports the new USB 3.0. It is capable of running at a maximum
transmission speed of up to 5 Gbit/s (625 MB/s) and is faster than USB 2.0 (480
Mbit/s, or 60 MB/s) and USB 1.1 (12Mb/s). USB 3.0 reduces the time required for
data transmission, reduces power consumption, and is backward compatible with
USB 2.0. It is a marked improvement in device transfer speeds between your
computer and a wide range of simultaneously accessible external Plug and Play
peripherals.
Important:
The 5V_standby power source of your power supply must support
≥720mA.

ARCHMI-932P User Manual
18
2.3 Hardware Installation
Board Layout
Figure 2.1: Motherboard SU173 Layout
• SU173: Wide Range 15~36V.
• The eDP connector is optional. Please contact your sales representative for more
information.
• JP17, JP18 an JP19 will work when the eDP connector is populated on the system
board.