ClearCaptions j3082 User manual

Quick Start Guide

step
1Place your new ClearCaptions®Phone phone near a power
outlet and a wired or wireless internet access point. If you’ll
be using your own phone service, your phone will also need
to be located near a phone jack.
Power outlet Wired or wireless router Phone jack

We’re here to help! Call us at 866-868-8695
step
2Remove the ClearCaptions Phone body, handset, cords and
phone stand from the box.
Phone
Stand
Handset Cord
Handset
ClearCaptions
Phone body
Power
Cord
Phone
Cord
Ethernet
Cord

Insert the phone stand into one of two pairs of slots on the
back of the phone body. The stand should ‘snap’ into place
when fully inserted.
step
3
SNAP!
SNAP!
Insert
stand.
Phone rests on
inserted stand.
12
3
Stand
snaps into
place.

We’re here to help! Call us at 866-868-8695
Remove the protective cover from the display screen.
step
4

Plug the black power cord into the rear of the phone body.
Insert the other end into an electrical outlet.
step
5
Feed through
stand and
plug into an
outlet.

We’re here to help! Call us at 866-868-8695
Your ClearCaptions Phone will guide you through the last
few steps.
step
6
The ClearCaptions
Phone has a touch
screen. When you
see the “Start”
button, tap it.
If using landline service, plug
in phone line. When you’re
nished with this step, tap the
“Next” button.
Log in when asked.

© 2022 ClearCaptions LLC. All rights reserved.
That’s it! Now, you can place your rst captioned phone call.
step
7
Need help?
Tap the
ClearCaptions
icon in Contacts or
Favorites, or dial
866-868-8695.
When you get to the end of
the set up process, you can
take a tour of the phone or
just get started.
Check marks
tell you where
you are in the
set up process.