Cleveland PowerPan SGL-30-T1 User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site:www.ClevelandRange.com
Email: [e-mail]
BRAISING PANS /
TILTING SKILLETS
PowerPan™SERIES
GAS, 35" RIM HEIGHT,
30 & 40 GALLON (110 & 150 LITER)
MODELS:cSGL-30-T1
cSGL-40-T1
Cleveland Standard Features
nAvailable in 30 & 40 gallon (115 & 150 liter) open frame
design models. Full capacity to bottom of pouring lip.
nExclusive Ultra Efficient Power Burner (Forced-Air) Gas
Combustion System with Automatic Ignition.
nExclusive Dual Power Settings: 90,000 and 125,000 Btu
for 30 gallons, 160,000 Btu and 200,000 Btu for 40 gallons
provides superior heat-up and recovery.
nOpen base design for easy cleaning and maintenance.
n5/8" Stainless Steel Bead Blasted cooking surface prevents
warping and keeps food from sticking.
nDurable 12 gauge, 304 Stainless Steel pan construction.
5
/8˝(16mm) mild steel clad bottom plus a 1/16˝(1.6mm)
Stainless Steel plate for even temperature distribution.
nLow 35" rim height for easy operation and cleaning.
nSplash Proof Controls and construction.
nSupplied with Cord & Plug for 115-volt controls.
nEasy-to-turn manual hand tilt with enclosed permantly
lubricated gearbox. Optional power tilt with manual override
available.
nGallon/Liter Markings and Vented Spring Assist Cover
standard.
nAvailable with Optional 2" Tangent Draw-Off Valve.
n10° Cooking Feature. Tilt unit up to 10° without the power
being turned off.
nAdjustable, Electronic Thermostat accurately controls
temperature from 100° to 450° F.
nElectronic "Spark Ignition System Standard".
nSpring-Assist Cover with full width handle and vent.
nTypical approvals include AGA, CSA, CE and NSF.
Options & Accessories
pPower Tilt with Manual Override (PT2)
p2" (50 mm) Tangent Draw-Off Valve (TD2SK), left side only
pDouble or Single Pantry Faucet (SPS14, DPS14),
includes Faucet Mounting Bracket
pFaucet Bracket (FBKT1)
pPan Carriers (PCS), not available on 30 gallon
models with a Tangent Draw-Off Valve
pVegetable Steamer Baskets (VS)
Shall be CLEVELAND, Tilting Skillet Model Number SGL-___-T1, gas
(type____ ) holding no less than
_____gallons ( _____ liters) ;Complete with
Dual Power Setting, Normal and High Power Cooking Controls, Power
Burner (Forced-Air) Gas Combustion System, Automatic Ignition, Splash-
Proof Construction, Spring Assist Cover with Vent, Gallon/Liter Markings,
5/8" Stainless Steel Clad Cooking Surface with Bead Blasted Finish,
Easy
to use Manual Hand Tilt with Enclosed Permantly Lubricated Gearbox
,
Adjustable Feet with Rear Flanged and Front Bullet Style.
Short Form Specifications
pHot & Cold Water Pre-Rinse Spray Head with Hose (PRS-S)
pPoaching Pans (PP)
pVoltage Option:
•VOSK3, 440/480 Volt, 60 Hz, 3 Phase
•VOSK4, 220/240 Volt, 50 Hz, 1 Phase - for export
pProtective Control Cover (CP-PCB-T1)
pCasters, 2 swivel, 2 locking (CST1)
Shown with optional 2" Tangent Draw Off Valve
SECT. XII PAGE 11
0707

DPK
(OPTION)
H C
DPK
(OPTION)
39"
991mm
35"
889mm
(RIM
HEIGHT)
12 5/8"
321mm
71"
1804mm
75°
28 3/4"
731mm
(PAN
SURFACE)
15 5/8"
397mm
2"
A
B
(PAN SURFACE)
41"
1042mm
25 15/16"
(659mm)
E(MINIMUM)
3 7/8" (99mm)
C
5 1/4"
(134mm)
(FAUCET
OPEN)
33"
(839mm)
5"
(127mm)
(MANUAL
TILT HANDLE)
D
120V
ONLY
RECOMMENDED FLOOR
SLOPE 1" (26mm) IN 4' (1220mm)
FLOOR DRAIN
PIPE DRAIN RECOMMENDED
MINIMUM VALVE SIZE PLUS 1" (26mm)
4" (102mm) MINIMUM
6" (153mm) RECOMMENDED ZERO CLERANCE FOR
NON-COMBUSTIBLE WALL,
3 1/2" (89mm) MINIMUM
CLEARANCE FOR
COMBUSTIBLE WALL
WALL
LEG LOCATION &
SUGGESTED FLOOR DRAIN DETAIL
WALL
MODEL
SGL-30-T1
SGL-40-T1
A
37 7/8"
(963mm)
49 7/8"
(1267mm)
ELECTRICAL
SUPPLY
TYPE: NAT or LP
WATER COLUMN: 3.5 (NAT), 10 (LP)
BTU PER CU. FT.: 1025 (NAT), 2500 (LP)
SUPPLY PRESSURE:
5" W.C. MIN (NAT), 11" W.C. MIN (LP)
BTU RATINGS:
SGL-30-T : 125,000 per hour
SGL-40-T : 200,000 per hour
RIGHT:
4" (102mm) (manual tilt)
1” (26mm) (power tilt)
LEFT: 0"
REAR:
0(non-combustible wall)
3.5" (89mm)
(combustible wall)
SGL-30-T1
520 LBS.
235 KG.
SGL-40-T1
560 LBS.
255 KG.
APPROX.
SHIPPING
WEIGHTS
GAS SUPPLY
(PIPING 3/4" NPT)
CLEARANCE
SPECIFICATIONS
DIMENSIONS CAPACITIES
B
24 1/2"
(623mm)
36 1/2"
(928mm)
F
18 1/4"
(464mm)
24 1/4"
(616mm)
G
53/4"
(146mm)
5 3/4"
(146mm)
H
8"
(204mm)
8"
(204mm)
C
31 3/4"
(807mm)
43 3/4"
(1112mm)
D
12"
(305mm)
18"
(458mm)
E
(combustible wall)
31/2"
(89mm)
3 1/2"
(89mm)
E
bustible wall)
2
2
In 4 oz. servings. Other sizes may be calculated.
30gallons / 115 Liters.............960
40gallons / 150 Liters...........1280
9 1/2" (241mm)
(PAN DEPTH)
H C
(non-com-
VOLTS: 120
PHASE: 1
AMPS: 1.4
FREQ: 60 HZ
220/240
1
1.5
50 HZ
FLOOR
DRAIN
GRATE
12" x 20"
(305mm x
508mm)
FOR OPTIONAL 2" TD VALVE
INCREASE FLOOR
DRAIN GRATE SIZE TO
24" x 20" (610mm x 508mm)
7/16"Ø, 3 HOLES
ON 3 1/8" (80mm) B.C.D.
FLANGED FOOT DETAIL
(REAR LEGS ONLY)
120°120°
4 7/8" (124mm)
9/16" (15mm)
1" (26mm)
(MAXIMUM
ADJUSTMENT
2" (51mm)
2 1/4"
(57mm)
NOTE: OPTIONAL 2" TD VALVE SHOWN IN GRAY
38"
966mm
TD 2 OUTLET
42 3/4"
1086mm
TD 2
H
23"
585mm
SECT.XII PAGE 12
0707
Litho in U.S.A.
(NOT TO SCALE)
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.