Click Medical Reel+ User manual

1
Click®Reel +
HC/HD Lace Kit
Advisories
Must be installed by a licensed professional.
Overtightening could compromise circulation.
Lace will wear:
• Routinely check for wear or damage.
• Look for broken fibers around areas of high wear.
• Replace lace if a significant amount of fibers are broken.
• Proactively replace lace every 6 months.
• Keep lace away from open flame and sharp edges.
Weight limit: 300lbs/135kg
See instructions in other languages: clickmedical.co/instructions
Kit Contents:
For more resources,
visit clickmedical.co
Remove existing reel from device:
a. Locate the metal insert.
b. Insert a small flathead screwdriver between
the metal insert and the reel body.
c. Gently pry the reel upwards.
d. Cut lace and remove all lace from device.
Replacing a Click Reel
Click Reel
Metal
Lace Feeder
2.0m
HC or HD Lace Reel Tool Plastic Lace
Feeder x 3
RP-000-07 (HC), RP-002-07 (HD)
- OR -
HC - High Capacity
RevoLock & RevoSurface
HD - High Durability
RevoFit
Additional Designs: To learn more about designing adjustable RevoFit devices, enroll in ClickAcademy.co
GUARANTEE
The Click Reel is guaranteed to last the life of the device
into which it is originally installed. Registration of the Click
Reel is required at the time of original device delivery.
To register: clickmedical.co/contact-us/cr-registration
WARRANTY
For warranty information on all of Click Medical’s
products: clickmedical.co/terms/#warranty
U.S. Customers:
Contact [e-mail]
Tel: [phone]
International Customers:
Please contact your local distributor.
Click Medical products are patent protected.
For full list see www.clickmedical.co/patents
Lace
High Capacity (HC) - For use with RevoLock® and RevoSurface®
High Durability (HD) - For use with RevoFit®
Visit www.clickacademy.co for important videos and instructions on working with Click Reels

2
Step 5 Step 6 Step 7
Pull lace to seat knot in the far
lace pocket, on the opposite
side of the green marker.
Completely push knot
into the cavity with a #1
flathead screwdriver:
Green
Marker
Pull open lace end to
remove loose lace from
device.
Repeat Step 3 to feed
open lace end through reel.
Meaure out ~10cm of lace.
Repeat Step 4 to tie
double overhand knot,
trim and seat it.
Pro Tip: Central fabricators should deliver device with Red Lock Plugs installed in reel.
This will allow the practitioner to decide if they want Power Mode or Shift Mode.
Keep Red Lock
Plugs installed
in the reel.
Decide which reel mode to activate:
75% of Applications
ADJUSTABLE DESIGNS WITH
Less than 3” of lace uptake
For more information on reel modes, watch our video here: https://vimeo.com/786989811
Remove Red
Lock Plugs after
lacing the reel.
25% of Applications
ADJUSTABLE DESIGNS WITH
More than 3” of lace uptake
Lace the reel using the
plastic lace feeder.
Pro Tip:
Gently pull the lace
through the cavity to
avoid breaking the
plastic lace feeder.
Step 3
Tie a single overhand knot for the HD
Lace (1) and a double overhand knot
for the HC Lace (2). Trim tail to <5mm
and lightly burn the end of the tail.
Step 4
1
2
Pro Tip: For RevoLock
applications measure
out enough lace to
match patient limb
length specifications.
Test function:
Cycle the system 3 times before delivering
to verify proper function.
b. Press the reel firmly into the collar (you
should hear a “CLICK” when secure).
CLICK!
Attach lace to the Click Reel:
Foot
Metal Insert
Ensure that the reel is ready for
lacing. Both lock plugs should be
in place. The green marks on the
spool should align with the green
marks on the washer. If necessary,
turn dial to align green marks.
Step 1 Step 2
Relace the device.
Attach each lace to its
corresponding lace port
on the reel - A, B, or C.
Lock Plug
Lace Port C
Lace Port A
Lock Plug
Adjust alignment
by turning dial
Important.
As a final step of fabrication, attach the patient
Instructions For Use hangtag on dial.
a. Insert the foot of the reel into the void in the
bottom of the collar opposite of the metal insert.
Install the Click Reel:

3
How to use the Click Reel
This product is waterproof and
submersible. Rinse with fresh
water after use in saltwater,
sand, or mud.
✔
✔
✔
Inspect lace:
Check for wear or damage routinely
Replace at any sign of wear
Replace lace every 6 months
Regularly inspect your system.
Click Medical, LLC, 1205 Hilltop Parkway, W101
Steamboat Springs, CO 80487, USA [phone]
MDSS GmbH, Schiffgraben 41
30175 Hannover, Germany
CH
UK
MDSS CH GmbH, Laurenzenvorstadt 61
5000 Aarau, Switzerland
MDSS-UK RP LIMITED, 6 Wilmslow Road
Rusholme, M14 5TP Manchester
United Kingdom
How to operate the Click® Reel in Power Mode - With Red Lock Plugs
S
H
I
F
T
T
E
C
H
N
O
L
O
G
Y
7
:
1
A
D
V
A
N
T
A
G
E
S
H
I
F
T
T
E
C
H
N
O
L
O
G
Y
7
:
1
A
D
V
A
N
T
A
G
E
S
H
I
F
T
T
E
C
H
N
O
L
O
G
Y
7
:
1
A
D
V
A
N
T
A
G
E
S
H
I
F
T
T
E
C
H
N
O
L
O
G
Y
7
:
1
A
D
V
A
N
T
A
G
E
S
H
I
F
T
T
E
C
H
N
O
L
O
G
Y
7
:
1
A
D
V
A
N
T
A
G
E
Reel will operate silently
while taking up lace
Turn reel clockwise to
quickly take up lace.
Micro-adjust by turning
forward or backward.
To fully release lace, unwind
counterclockwise until “clicking”
stops. Lace will then freely
release from the reel.
Once clicking, the reel will hold
lace tension and wind up lace at
a higher power
Turn the dial clockwise
to tighten to desired
tension.
Turn the dial counterclockwise
to release tension.
Micro-adjust as needed.
Continue to turn the dial. It
will automatically shift from
“silent” to “clicking”.
How to operate the Click® Reel in Shift Mode - Without Red Lock Plugs
The reel can operate in either Power Mode or Shift Mode.
If you want to change between modes, see our video on the process here: https://vimeo.com/786989811
If the reel always clicks when
turned, it is in Power Mode