Click Medical QuickFit OK1400-130-05 User manual

Kit Contents:
Adhesive Velcro Tab
QuickFit Strap Hint: Dial is usually placed
on the lateral side.
Important: Add optional QuickFit Buckle if desired
before continuing to step 3:
1
Attach Velcro
1/4 of the way down
2
4
6 7
5
3
QuickFit™
Strap Fitting Instructions
1” - OK1400-130-05
1.5” - OK1410-130-05
2” - OK1420-130-05
Push to engage dial: Twist clockwise to tighten. Pull up on dial to release tension: Lift Velco tab to release.
Wrap strap from dial around body to determine strap length. Cut strap to size at dial.
Install Velcro at edges of devise.
Check guide position. Position tunnel opening at edge of desired closure,
insure strap path is clear of interference.

12
4
1 2
3
See QuickFit Strap for sizing instructions
To release strap:
QuickFit™ Buckle
Add-On Instructions
1” - OK1405-000-05
1.5” - OK1415-000-05
2” - OK1425-000-05
A. Close strap at self-securing buckle.
B. Push to engage dial, twist clockwise to tighten strap.
Pull up dial for quick release. Pull tab to open.
C. Adhere Velcro to back of strap.
Cut strap to size and attach to Velco end of buckle.
Install QuickFit buckle on device with included Velcro tabs. Attach QuickFit strap:
B. Loop Velcro tab through buckle.
A. Insert Velcro
B. Twist to
tighten
A. Magnet
buckle