CLINIMAX Simex ELEGANCE 04035 User manual

CLINIMAX EQUIPAMIENTOS, S.L., reserves the right to modify a d / or rectify the products a d specificatio s thereof without prior otice.
SOAP DOSER. ELEGANCE Ref. 04035
Product description
- Metallic ABS material.
- Metallic Embellisher.
- Metallic polyethylene tan .
- Gel/disenfectant dispensing.
- Wall mounted and with security loc .
- With push button.
- Tan capacity: 1 liter.
- Net product weight: 0,99 g.
Techncal specifications:
Dispenser made entirely of ABS material, metallic color, receives inside a polyethylene tan with a filling capacity of 1 liter soap (vegetable or synthetic). The
inner tan is filled by opening the housing by means of a safety loc located on the top of the product. On its front, it has a viewfinder in the form of oval for soap
filling control. The push-button lid of the soap dispenser is made of ABS thermoplastic material.
The dispenser operates by sensor. The installation is done attached to the wall using four screws with universal wall stud, each of them located on the mounting
brac et of the dispenser.
The soap dispenser model is ELEGANCE® 04035.
Technical Characteristics
Product specifications:
- Type of deposit material: Polyethylene
- Type of cover material: Metallic ABS plastic.
- Capacity: 1 liters.
- Dispensation: Gel/disenfectant.
- Wall mounted installation.
- Power using 4 batteries type C-LR14 of 1.5 V.
Packaging Specifications:
- Pac aging dimensions: 285 x 140 x 131 mm
- Weight with pac aging: 1.16 g.
- Screws and dowels included.

SOAP DOSER. ELEGANCE Ref. 04035
Mounting Template:
Certifications.
unctioning:
Sensor activated.
Cleaning:
Pass wet cloth with water and neutral detergent, never
abrasive. Dry with a clean dry cloth that does not give off
fluff.
CLINIMAX EQUIPAMIENTOS, S.L., reserves the right to modify a d / or rectify the products a d specificatio s thereof without prior otice.
Setting-up:
In toilet areas with a high frequency of use, the recommendation is to
install a dispenser per sin . In toilet areas with a lower frequency of
use, the recommendation is to install a dispenser for every two sin s or
two dispensers for each three sin s.