
Thank you for counting on Clinton to meet your medical
equipment needs by purchasing this fine equipment. All
Clinton equipment is designed and manufactured to provide
years of dependable service because we want you as a
customer now and in the future. Below are easy to follow
instructions on how to properly assemble your equipment.
Please contact us at 800-441-9131 if you experience any
difficulty with the assembly or have questions.
INTENDED USE. Clinton Family Practice and Space Saver
models 8834, 8844, 8870 and 8890 are specifically designed
and engineered for medical examinations use only. Persons
using the table should be observed by trained medical personnel
while on the table and getting off the table. Never leave anyone
unattended on the table. Combination of weight and force
exerted on the table is not to exceed a total of 400 lbs. Using
this equipment for unintended purposes could result in
damage to the equipment and serious injury.
CAUTION: Never sit on the pull-out leg rest or the head
end of the table. The pull-out leg rest and the head end of
the table are not engineered to support full body weight
or excessive weight/force combination. Sitting on the leg
rest and/or head end of the table could result in damage
to the table and/or serious injury.
ASSEMBLY INSTRUCTIONS FOR FAMILY PRACTICE EXAM TABLES
MODELS: 8834, 8844, 8870 & 8890
MAXIMUM WEIGHT CAPACITY 400 LBS
MODEL 8890
MODEL 8844 same as 8890 without stirrups
Contents
A. Adjustable Padded Backrest
B. Padded seat
C. Base
D. Dual Entry Storage
E. Drawer Storage
F. Pull-Out Stirrups (8870 only)
G. Laminate Pull-Out
H. Paper Dispenser
Contents
A. Adjustable Padded
Backrest
B. Padded seat
C. Base
D. Dual Entry Storage
E. Drawer Storage
F. Pull-Out Stirrups
G. Laminate Pull-Out
H. Paper Dispenser
I. Pull-Out Step Stool
J. Rubber Feet
Tools Required
•
Phillips Screwdriver/Screw Gun
• Socket
Wrench
Tools Required
•
Phillips Screwdriver/Screw Gun
• Socket
Wrench
Time Required
•
15–20 Minutes
Time Required
•
15–20 Minutes
Hardware for Table
(4) 1" Hex Head Bolts
(8) 3/4" Pan Head Screws
(4) 7/16" Kep®Lock Nuts
(4) 1/4" washers
Hardware for Table
(4) 1" Hex Head Bolts
(8) 3/4" Pan Head Screws
(4) 7/16" Kep®Lock Nuts
(4) 1/4" washers
D
D
I
H
H
E
J
E
A
A
B
B
C
C
G
G
F
F
MODEL 8870
MODEL 8834 same as 8870 without stirrups
WARNING: Periodically check that both of the pull-out, step
stool's rubber feet are in good condition, and rest on the
floor when in use. If not, serious damage to the table, as well
as, serious injury could occur to persons using the step stool
which could slip while in use.