Cloner Alliance HDML-Cloner Box Pro User manual

12
17
24
27
28
30
34
36
37
38
38
39
9
9
System Requirements
Install HDML-Cloner Pro Helper
Connect
Register HDML-Cloner Pro Helper
How to get the registration code of HDML-Cloner Pro Helper

1

2

3

4

5

6

7
* The USB flash drive is not included in the product box. You need to purchase it separately.

Tips on selecting a proper USB flash drive:
1. Recommended brands: Toshiba, SanDisk, Kingston
2. Interface specifications: USB 2.0, USB 3.0
3. Connector type: Type A
4. Make sure the actual reading speed is not less than 30Mbps, and the writing speed is
not less than 10Mbps.
5. It is recommended that you format the USB flash drive or erase data before
connecting it to our product.
6. It is recommended that you use a USB flash drive with the LED indicator, so that you
can easily understand the working status of the USB flash drive. Don't unplug the USB
flash drive in the process of reading and writing, otherwise your data will be damaged.
7. FAT32 format is recommended. Due to the special properties of FAT32, the single
video file will be 2GB at most, and the recorded video will be split into multiple files but
more stable (You can use our bonus software MP4-Cloner from https://www.cloner-
alliance.com/download.html to combine them into one file easily). For NTFS, the
recorded video will be stored as a single large file, but will be more prone to error than
FAT32, resulting in unsuccessful storage or file corruption. Please contact our customer
service for help when you encounter such problems. Therefore, it is strongly
recommended that you format the USB flash drive to FAT32 in order to get a better
experience.
8. After formatting the USB flash drive using PC, please make sure to safely remove the
USB device instead of unplugging it directly, otherwise the USB flash drive will be
damaged and not work properly.
9. If the recorded video is 0KB or cannot play back normally, please reformat your USB
flash drive.
8

IMPORTANT: If you set the recording frequency to "Once", please make sure to create a schedule task at least 3
minutes in advance. If you set the recording frequency to "Every day", please make sure to create a schedule
task at least 1 minute in advance. Then HDML-Cloner Box Pro will start recording the video at the scheduled time
properly.
9

10

11

12

13

14

15

16