CMi SpiroLink PF-Y1 User manual

SpiroLink Mouthpiece with Filter
Instructions for use Last updated: Feburary 2021
Introduction
Product Name: SpiroLink ® spirometry Y1 filter and M1 mouthpiece
Model Number: PF-Y1 (filter) and PF-M1 (mouthpiece)
Compatibility: CMI Health SpiroLink ® Only
Intend to Use
The Y1 filter and M1 mouthpiece package is designed to fit the CMI Health SpiroLink ® for
added seal and protection during use. It prevents any debris or fluid damage to the device and
allows for greater durability and a longer lifespan of the device.
Device Y1 filter M1 mouthpiece
How to insert/replace the Y1 filter and M1 mouthpiece?
1. Position the SpiroLink ®device facing the side.
2. If the old mouthpiece is in place, gently pull it out.

SpiroLink Mouthpiece with Filter
Instructions for use Last updated: Feburary 2021
3. Combine the new Y1 filter and M1 mouthpiece. The arrow “ ” on the bottom of the Y1
filter should align with the top of the device gas inlet (make sure the device is facing
side).
4. Insert the upper part of the Y1 filter first, and then gently press down to lock it.
Attentions
It is highly recommended to:
•Replace the Y1 filter every week.
•Clean the M1 mouthpiece ONLY with soapy water after each use.
•Change both Y1 filter and M1 mouthpiece together when using among multiple
users.