Coastal Amusements SNOW DAY User manual

SNOW DAY
-US
Operator Manual
V1.2

SNOW DAY -US Operator Manual V1.2
1
Contents
1. Machine instructions...................................................................2
2. Machine setting & Test instructions............................................11
3. Fault & Resolution.......................................................................18
4. Machine maintenance.................................................................. 21
5. Wiring schematic......................................................................... 23

SNOW DAY -US Operator Manual V1.2
2
1. Machine instructions
1.1.Specification and Parameter
1.Voltage：AC110V 50/60Hz
2.Dimension：W1100×D1620×H2985mm（Assembly）
3.Weight：About 210 Kg
4.Power：795W
1.2.Considerations
1.Suitable for indoor environment
2.Please do not placed in the tilted position, so as to avoid accidents
3.Please do not use it in the following places：
In the dusty environment；
In the high temperature or airiness environment ；
A condensing place that causes a machine to produce condensed water or humidity.；
Near hot objects ；
Dangerous object ；
Strong magnetic interference ；
Near devices that are prone to spark;；
Voltage instability or voltage is too low ；
Vibration serious place ；
4.The machine must be assembled and fixed in accordance with assembly instructions before
normal operation.
5.Before moving, must turn off the power and unplug the power cord
6.If the caster can not move when moving, the machine's foot seat is put away, please confirm
whether the bottom surface is flat.
7.Random human movement, flip, transport, etc. can damage equipment, damage machine
performance.
8.Confirm in the process of moving, overturning, transporting and so on to meet the
requirements of the manufacturers.

SNOW DAY -US Operator Manual V1.2
3
1.3.Installation notes
1.3.1. Packaging List
NO.
Description
Code
Unit
Qty
1
Main cabinet
SET
1
2
Coin cabinet
SET
1
3
Ticket cabinet
SET
1
4
Step assembly
SET
1
5
Power cabinet
SET
1
6
The top signboard
PCS
1
7
Balls
PCS
500
8
Cross head screw
M4x8
PCS
6
9
Cross head screw
M5x12
PCS
11
10
Socket hexagon head screw
M5x10
PCS
4
11
Key 1
PCS
2
12
Key 2
PCS
2
13
Operator Manual
PCS
1
14
AC Power cord
PCS
1
1.3.2. Unpack the packing material of each part of the machine
Main cabinet
Coin cabinet
Ticket cabinet
Step assembly
Power cabinet
Accessories Box

SNOW DAY -US Operator Manual V1.2
4
1.3.3. Install the power cabinet to the Main cabinet as below.
1. Connect the connection
between the blower assembly
and the Main cabinet.
Inside the Accessories Box
Keys
Power cord
Manual
Screws M5x12/11PCS
Screws M5x10 /4PCS
The top signboard
Balls
Screws M4x8 /6PCS

SNOW DAY -US Operator Manual V1.2
5
1.3.4. Move the Main cabinet to a suitable position, then unscrew the 6 feet of
the machine, adjust the height of the foot, ensure that all casters are off the ground
and the force of each foot is close.
2. Mount the power cabinet on
the side of the Main cabinet, and
lock the two buckles.
3. Double lock this buckle by screw
or lock for safety.

SNOW DAY -US Operator Manual V1.2
6
Take out two Harness of Ticket
cabinet and Coin cabinet
Tighten the screws
M5x12; 3pcs
1.3.5. Install the Step assembly, Ticket cabinet and Coin cabinet to the Main
cabinet by bolts.
Tighten the screws
M5x12; 5pcs
Tighten the screws
M5x12; 3pcs
Connect these five
connectors.

SNOW DAY -US Operator Manual V1.2
7
1.3.6. Install the top signboard with main cabinet by bolts.
Tighten the screws M5x10; 4pcs
Tighten the screws
M4x8; 6pcs

SNOW DAY -US Operator Manual V1.2
8
1.4.How to play
Game construction:
Entrance
Coin selector
Elastic curtain
ball storehouse
Ticket dispenser
screen
Start button
The ball goal
Ball recycling
entrance
Ball release port
Power inlet
/Main power switch
/Fuse
Air inlet
Maintenance door
/Main PCB
Ball pipe
Signboard

SNOW DAY -US Operator Manual V1.2
9
How to play the game:
1. Insert the coins, the machine will be ready soon.
2. Open the curtain and enter game house carefully.
3. When display screen show “DOWN ARROW”, Press “START BUTTON” to start the game.
4. The ball release port open automatically, and balls are falling down for game play. At the
same time, ball collector in the bottom also start to work.
5. Player insert the balls into goal to get points, the relevant points will display on the screen.
6. Game over when time runs out, then the goal will not be scoring.
7. Player will get the tickets according to their points (optional).
8. The balls on the play area will be collected by the game automatically, then back to standby
mode.
1.5.Balls Request
1. Please use the original factory color ball. If other colored balls are used, the diameter of the
ball should be between 70mm and 80mm. The weight of the ball is between 4 to 7.5g.
2. The number of balls placed inside the machine game needs to match the game time and the
ball time.
3. It is assumed that the recommended amount of Reclaim time and the number of balls is as
follows:
Reclaim time = Game time - Drop time
ball
100pcs
200pcs
300pcs
400pcs
500pcs
Reclaim time
10s
20s
30s
40s
50s
*This recommended data is the player in the ordinary pitching speed measurement, please follow the actual situation
increase and decrease the number of balls.

SNOW DAY -US Operator Manual V1.2
10
1.6.Game considerations
1. This game is only suitable for children standing at 80-130cm.
2. Children need to be accompanied by adults to play games.
3. Don't let the child get into the back of the recycling ball. Don't put your hand into the goal.
4. It can not enter 3 or more people at the same time, in case of accident.
5. Children feel uncomfortable and need to stop the game.
6. Operator should clean the game daily to bring the player a comfortable game area.
7. This game should be operated by 300 pieces of balls.
1.7.Machine Movement considerations
1. Be sure to pick up each foot before the movement.
2. Remove the fan assembly if you move it on uneven ground.
3. The individual components must be packed and transported for long distances.
4. Long distance transport needs to set an EPE and other shockproof materials in the bottom
door.(as below)
5. If encounter the gate is not high enough when the machine moving, you can remove the top
assembly and then move. (as below)
Up
Pull back and lift
Untie 6pcs buckles
Note Wired Group connectors

SNOW DAY -US Operator Manual V1.2
11
2. Machine setting & Test instructions
2.1.DIP switch setting
The DIP switches on the machine board :
SW1：
Item
Coins
Drop time
(The time of the ball
felling.)
Game time
(Total game time)
1
2
3
4
5
6
7
8
Free
OFF
OFF
OFF
1 Coin/Game
ON
OFF
OFF
2 Coins/Game
OFF
ON
OFF
3 Coins/Game
ON
ON
OFF
4 Coins/Game
OFF
OFF
ON
5 Coins/Game
ON
OFF
ON
6 Coins/Game
OFF
ON
ON
7 Coins/Game
ON
ON
ON
0s
OFF
OFF
10s
ON
OFF
20s
OFF
ON
45s
ON
ON
30s Game
OFF
OFF
OFF
45s Game
ON
OFF
OFF
60s Game
OFF
ON
OFF
70s Game
ON
ON
OFF
80s Game
OFF
OFF
ON
90s Game
ON
OFF
ON
100s Game
OFF
ON
ON
120s Game
ON
ON
ON
Defaults
ON
OFF
OFF
OFF
ON
OFF
ON
OFF

SNOW DAY -US Operator Manual V1.2
12
SW2：
Item
Score
Item
Fixed Ticket
1
2
3
4
5
6
7
8
1 Score/ball
OFF
OFF
OFF
OFF
No Ticket
(Regular ticket)
OFF
OFF
OFF
OFF
2 Score/ball
ON
OFF
OFF
OFF
1 Ticket/Game
ON
OFF
OFF
OFF
3 Score/ball
OFF
ON
OFF
OFF
2 Tickets/Game
OFF
ON
OFF
OFF
4 Score/ball
ON
ON
OFF
OFF
3 Tickets/Game
ON
ON
OFF
OFF
5 Score/ball
OFF
OFF
ON
OFF
4 Tickets/Game
OFF
OFF
ON
OFF
6 Score/ball
ON
OFF
ON
OFF
5 Tickets/Game
ON
OFF
ON
OFF
7 Score/ball
OFF
ON
ON
OFF
6 Tickets/Game
OFF
ON
ON
OFF
8 Score/ball
ON
ON
ON
OFF
7 Tickets/Game
ON
ON
ON
OFF
9 Score/ball
OFF
OFF
OFF
ON
8 Tickets/Game
OFF
OFF
OFF
ON
10 Score/ball
ON
OFF
OFF
ON
9 Tickets/Game
ON
OFF
OFF
ON
15 Score/ball
OFF
ON
OFF
ON
10 Tickets/Game
OFF
ON
OFF
ON
20 Score/ball
ON
ON
OFF
ON
12 Tickets/Game
ON
ON
OFF
ON
25 Score/ball
OFF
OFF
ON
ON
15 Tickets/Game
OFF
OFF
ON
ON
30 Score/ball
ON
OFF
ON
ON
18 Tickets/Game
ON
OFF
ON
ON
35 Score/ball
OFF
ON
ON
ON
20 Tickets/Game
OFF
ON
ON
ON
40 Score/ball
ON
ON
ON
ON
25 Tickets/Game
ON
ON
ON
ON
Defaults
OFF
OFF
OFF
OFF
Defaults
OFF
OFF
OFF
OFF

SNOW DAY -US Operator Manual V1.2
13
SW3：
Item
Regular ticket
Save
Standby
Clean ball
1
2
3
4
5
6
7
8
No Ticket
OFF
OFF
OFF
1 Score/Ticket
ON
OFF
OFF
2 Score/Ticket
OFF
ON
OFF
3 Score/Ticket
ON
ON
OFF
5 Score/Ticket
OFF
OFF
ON
10 Score/Ticket
ON
OFF
ON
20 Score/Ticket
OFF
ON
ON
30 Score/Ticket
ON
ON
ON
Not save coin and ticket
OFF
Save coin and ticket
ON
No demo
OFF
With demo
ON
Don't Collect the balls
after a game
OFF
Collect the balls after a
game
ON
Defaults
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF

SNOW DAY -US Operator Manual V1.2
14
2.2.Test instructions
Setting Panel Description
Up(test)：Click to enter the test mode when standby, Turn up in the test mode.
Down(service)：Click to free game once when standby, Turn down in the test mode.
Enter：Click to select or determine.
2.2.1. Bottom Door Test
>Press "TEST"to enter the bottom door test, as the picture shown in the right.
>Press "Enter" key, the screen <OFF> turns <ON>, the bottom door begins to
open and close continuously, Press "Enter" again, the bottom door stops.
>When the bottom door is open,“OPEN”shows“ON”to indicate that the "open
check" micro switch is normal.
>When the bottom door is closed,“CLOSE”shows“ON” to indicate that the "off
check" micro switch is normal.
2.2.2. Top Door Test
>Press "TEST",and press“DOWN”to enter the top door test, as the picture shown
in the right.
>Press "Enter" key, the screen <OFF> turns <ON>, the top door begins to open
and close continuously, Press "Enter" again, the top door stops.When testing
again,the top door rotates in opposite direction.
>When the top door is open,“OPEN”shows“ON”to indicate that the "open check"
micro switch is normal.
>When the top door is closed,“CLOSE”shows“ON” to indicate that the "off
check" micro switch is normal.

SNOW DAY -US Operator Manual V1.2
15
2.2.3. Blower test
>Press "TEST",and press“DOWN”to enter the blower test, as the picture shown in
the right.
>Press "Enter"button, the screen <OFF> turns <ON>, the blower starts to work,
Press "Enter" again, the blower stops.
>When there is no ball at the bottom, the screen "SEN1" does not show "ON";
When there is a ball at the bottom, the screen "SEN1"will shows "ON".
2.2.4. Screen test
>Press "TEST",and press“DOWN”to enter the screen test, as the picture shown in
the right.
>Press "Enter" button,the screen will shows red and green lines moving from top
to bottom alternately,
>Check whether the pixels on the screen are abnormal.
2.2.5. RGB LED test
>Press "TEST",and press“DOWN”to enter the RGB LED test, as the picture
shown in the right.
>Press the “Enter” button,The LEDs of the machine will be turned on in turn.
>R：ON ---- light red
>G：ON ----light green
>B：ON ----light blue
>M：ON ----Mouth light
2.2.6. Coin Counter 1 Test
>Press "TEST",and press“DOWN”to enter the Coin Counter 1 test, as the picture
shown in the right.
>Press the "Enter" key, the screen will shows "CCNT1:on" 0.5 second,And the
coin counter 1 count 1.
2.2.7. Coin Counter 2 Test
>Press "TEST",and press“DOWN”to enter the Coin Counter 1 test, as the picture
shown in the right.
>Press the "Enter" key, the screen will shows "CCNT2:on" 0.5 second,And the
coin counter 2 count 1.
RGB LED
Mouth LED

SNOW DAY -US Operator Manual V1.2
16
2.2.8. Ticket Counter Test
>Press "TEST",and press“DOWN”to enter the Ticket Counter test, as the
picture shown in the right.
>Press the "Enter" key, the screen will shows "TCNT:on" 0.5 second,And the
Ticket Counter count 1.
2.2.9. Ticket Out Test
>Press "TEST",and press“DOWN”to enter the Ticket Out test, as the picture
shown in the right.
>Press the “ENTER”button and a ticket will be sent out at the ticket outlet.
2.2.10. Button LED Test
>Press "TEST",and press“DOWN”to enter the Button LED test, as the picture
shown in the right.
>Press the “ENTER”button and the LED light in the <START> button will
shine.
2.2.11. Sounds Test
>Press "TEST",and press“DOWN”to enter the Sounds test, as the picture
shown in the right.
>Press the “ENTER”button, the screen shows the sound segment number and
starts playing the segment sound.
2.2.12. Input signal Test
>Press "TEST",and press“DOWN”to enter the Input signal test, as the picture
shown in the right.
>Each letter represents an input signal, by manually touching a signal's switch
or sensor, to observe whether the corresponding letter on the screen changes,
you can check whether the switch or sensor work is normal.
A
Coin selector1 Signal
I
Bottom door “CLOSE”sensor
Q
Enter button
B
Coin selector2 Signal
J
Ball pipe bottom sensor
R
*
C
Ticket Repair button
K
*
S
*
D
Ticket Machine Feedback Signal
L
Goal scoring A sensor
T
*
E
Start button
M
Goal Scoring B1 sensor
U
*
F
Top door “CLOSE”sensor (NH)
N
Goal Scoring B2 sensor
V
*
G
Top door “OPEN”sensor (NH)
O
Up(Test) button
W
*
H
Bottom door “OPEN”sensor
P
Down (Service) button
X
*

SNOW DAY -US Operator Manual V1.2
17
2.2.13. DIP Switch Test
>Press "TEST",and press“DOWN”to enter the DIP Switch test, as the picture
shown in the right.
>Each letter represents an input signal, by manually touching a signal's switch
or sensor, to observe whether the corresponding letter on the screen changes,
you can check whether the switch work is normal.
>Red means OFF,Green means ON
>H represents the 1-8 bit of the SW1, the I-P represents 1-8 bit of SW2, and the
Q-X represents 1-8 bit of SW3.
2.2.14. Time of Bottom door opened setting
>Press "TEST",and press“DOWN”to enter the Time of Bottom door opened
setting, as the picture shown in the right.
>Press the “ENTER”button,the"<>" shows on the screen, and press the
"Up" or "down" button to increase or decrease the value, and then press the
“ENTER”button again to determine
2.2.15. Time of Bottom door closed setting
>Press "TEST",and press“DOWN”to enter the Time of Bottom door closed
setting, as the picture shown in the right.
>Press the“ENTER”button,the"<>" shows on the screen, and press the "Up"
or "down" button to increase or decrease the value, and then press the
“ENTER”button again to determine.
2.2.16. Second drop time setting
>Press "TEST",and press“DOWN”to enter the second drop time setting, as
the picture shown in the right.
>Press the “ENTER”button,the"<>" shows on the screen, and press the
"Up" or "down" button to increase or decrease the value, and then press the
“ENTER”button again to determine.
2.2.17. Restore factory setting
>Press "TEST",and press“DOWN”to enter the Restore factory setting, as the
picture shown in the right.
>Press the “ENTER”button to Restore factory settings.
2.2.18. Software versions
>Press "TEST",and press“DOWN”to enter the Software Version page, as the
picture shown in the right.
2.2.19. Save and exit
>Press "TEST",and press“DOWN”to enter the Save and exit page, as the
picture shown in the right.
>Press the “ENTER”button to save settings and Exit.

SNOW DAY -US Operator Manual V1.2
18
3. Fault & Resolution
3.1.Fault code description and fault handling
ERROR
CODE
ERROR
DESCRIPTION
FAULT ANALYSIS AND TREATMENT
Error 1
Program updated
The Program version has been changed.
Reboot to remove the alarm.
Error 2
Data error
Save data error.
1、restore the factory settings;
2、Replace the motherboard.
Error 3
Coin selector 1
failure
1、Check whether the Blocked coin in coin selector and take it out if there is.
2、Check whether the SW1 switch of coin selector is in NC,if so,dial to NO.
3、Replace the coin selector.
Error 4
Coin selector 2
failure
1、Check whether the Blocked coin in coin selector and take it out if there is.
2、Check whether the SW1 switch of coin selector is in NC,if so,dial to NO.
3、Replace the coin selector.
TICKET
IS EMPTY
(Error 5)
Ticket is empty
The ticket is out, waiting to be added.The screen displays “SURP:xxx”to
indicate the remaining tickets.
1、Add ticket again,press the repair button next to the lottery machine,ticket can
be output.
2、If the device is not set to issue a ticket, the alarm can be set off by restoring
the factory setting.
Error 6
Bottom door
"Open" sensor
error
1、Check the bottom door for foreign matter sticking；
2、Enter the bottom door test, heck the bottom door motor is working normally.
If the motor doesn't turn, replace the motor;
If there is no “Open” signal, adjust / lock or replace the sensor.
Error 7
Bottom door
"Close" sensor
error
1、Check the bottom door for foreign matter sticking；
2、Enter the bottom door test, heck the bottom door motor is working normally.
If the motor doesn't turn, replace the motor;
If there is no “Close” signal, adjust / lock or replace the sensor.
Error 8
Top door "open"
sensor error
1、Check the top door for foreign matter sticking；
2、Check for loose belts and couplings；
3、Enter the top door test, check the top door motor is working normally.
If the motor doesn't turn, replace the motor;
If there is no “open” signal, adjust the gap between the sensor and door or
replace sensor.
Error 9
Top door
"Close" sensor
error
1、Check the top door for foreign matter sticking；
2、Check for loose belts and couplings；
3、Enter the top door test, check the top door motor is working normally.
If the motor doesn't turn, replace the motor;
If there is no “Close” signal, adjust the gap between the sensor and door or
replace sensor.

SNOW DAY -US Operator Manual V1.2
19
Error 10
Ball chute / ball
pipe jam
1、Check if there is any foreign matter stuck in the ball pipe and remove it.
2、Empty the ball pipe ,enter the “browse all inputs” test,check whether there are
green items in L、M、N, and change the corresponding sensor if there are.
3、Check if the position of sensors moved away if issue remains..
3.2.Other fault analysis and treatment
1.The ball is stuck so frequently that the wind cannot blow it into the bin.
A-Check whether the weight of the ball exceeds 8g or not.
B-Check whether the voltage of the site is too low.
C-Check whether the fan inlet and outlet are blocked,if yes,clean up.
D-Check if the fan has accumulated and clean up if there is.
2.After each game,the blower has been working for a period of time.
A-Check if there is ball lingering in the end of the game ,if there is,reduce the ball or increase the game time.
B-Check the bottom door’s test sensor whether there is debris or dust.If there is,clean it up.
3.Lattice screen confused or irregular flashing
A-Check whether the wire is loose,if yes,plug the wire set.
B-Replace the display screen.
3.3.Machine structure diagram
3.3.1. Screen Component:
Screen Unit board
Screen Panel Acrylic