Coastal Amusements Black Hole User manual

Coastal Amusements, Inc.
1950 Swarthmore Ave. Lakewood, NJ 08701
[phone]
[email protected]
http://www.coastalamusements.com
Operator Manual
Black Hole_Manul.indd 1 2014-12-23 오전 11:45:48

BLACK HOLE
1
FOR SAFETY
￭
Setting up
Be sure to consult an industry specialist when setting up, moving or
transporting this product.
￭
This product should not be set up, moved or transported by anyone other than an industry
specialist.
￭
When installing this product, set the 4 leg levelers evenly on the floor and make sure that the
product is installed stably in a horizontal position. Unstable installation may result in injury or
accident.
￭
When installing this product, do not apply undue force on movable parts. Otherwise, injury
and accident may result, or the product may be damaged.
The machine for indoor usage only; do not install outside.
Do not set the game machine up near emergency exits.
Protect the game machine from:
-Rain or moisture.
-Direct sunlight.
-Direct heat from air-conditioning and heating equipment, etc.
-Hazardous flammable substances.
-Otherwise an accident or malfunction may result.
Do not place containers holding chemicals or water on or near the game
machine.
Do not place objects near the ventilating holes.
Do not bend the power cord by force or place heavy objects on it.
Never plug or unplug the power cord with wet hands.
Never unplug the game machine by pulling the power cord.
Be sure to use indoor wiring within the specified voltage requirements. For
extension cord, use the specified rating.
Be sure to use the attached power cord.
Never plug more than one cord at a time into the electrical receptacle.
Do not lay the power cord across a walkway.
Be sure to ground this product.

BLACK HOLE
2
Do not exert excessive force when moving the machine.
For proper ventilation, keep the game machine 100mm (4") away from the walls.
Do not alter the system related dip switch settings.
￭
Operation
If there is any abnormality such as smoke or abnormal noise being emitted
from the machine, immediately turn OFF the main power switch and unplug
the power cord from the receptacle.
￭
Using the machine in abnormal conditions could result fire or accidents.
Do not connect the power cord improperly or permit dust or dirt to come in
contact with the connection.
￭
Doing so could affect the power periodically
Do not use this product anywhere other than commercial areas.
￭
Using in a residential area or an area next to a residential area could affect signal reception
of radios, television sets, telephones, etc..
Do not plug or unplug the power cord with wet hands.
If the power cord or power plug becomes damaged, stop use immediately until
the damaged is repaired.
￭
Inspection and cleaning
Be sure to turn OFF the main power switch and unplug the power cord
from the receptacle before inspecting or cleaning the machine.
When replacing parts, be sure to use parts of the correct specifications.
Never use parts other than the specified ones.
All maintenance should be performed by a qualified specialist only, as high
voltage is present in some areas.
If the sub power switch of the service panel is turned OFF without turning OFF
the main power switch of the power supply unit, some parts in the units may
remain live. When opening the back door, be sure to turn OFF the main
power switch and unplug the power cord from the receptacle.

BLACK HOLE
3
To clean the game machine, wipe with a soft cloth dampened with a neutral
non-abrasive detergent.
￭
Using thinner of other organic solvent or alcohol may damage the material.
￭
Electrical shock or equipment failure could be caused by water entering the inside of the
machine.
￭
Moving and transportation
Components in the game are sensitive to vibrations and impact. Care should
be used when moving and transporting the game machine.
Be sure not to let the machine tip over.
Before moving the machine, be sure to turn OFF the main power switch,
unplug the power cord from the receptacle and remove the power cord from
the machine.
Before moving take the machine off the levelers and move it on the casters.
Avoid excessive force while moving the machine.

BLACK HOLE
4
CONTENTS
FOR SAFETY
COMPONENTS
1. ABOUT GAME
1-1. GAME DESCRIPTION
1-2. DIMENSIONS
1-3. SPECIFICATION
2. NAME OF PARTS
2-1. NAME OF PARTS
2-2. BILLBOARD TITLE ASSEMBLY
3. GAME SETUP& TEST MODE
3-1. CONTROLPANEL
3-2. SETUPMODE
4. ERROR & TROUBLE SHOOTING
4-1. TROUBLESHOOTING: ERROR
4-2. TROUBLESHOOTING: TICKET ERROR
4-3. TROUBLESHOOTING: SENSOR ERROR
4-4. SPRING REPLACEMENT INSTRUCTION
4-5. HOW TO SET PSU SWITCH
5. WIRING DIAGRAM

BLACK HOLE
5
COMPONENTS
No. Figure Part Name QTY
1 6001 KEY
(COIN BOX) 2 EA
2 7001 KEY 2 EA
3 MANUAL 1 EA
4
HEX WRENCH
METRIC
(2.5mm) / (4mm)
2 EA
5 COIN DOOR
COVER 1 EA
6 AC CORD 1 EA

BLACK HOLE
6
1. ABOUT GAME
1-1. GAME DESCRIPTION
Black hole is a true skill based ticket redemption game. The player pulls the
plunger and shoots the ball to win the jackpot.
1-2. DIMENSIONS
1-3. SPECIFICATION
DIMENSIONS
(See above figure)
W1066 x D940 x H2346 (mm)
W42 x D37 x H93 (inch)
WEIGHT
210Kg (463lbs)
POWER
110V (50/60Hz), 190W

BLACK HOLE
7
2. NAME OF PARTS
2-1. NAME OF PARTS

BLACK HOLE
8
2-2. BILLBOARD TITLE ASSEMBLY

BLACK HOLE
9
3. GAME SETUP & TEST MODE
3-1. CONTROL PANEL
■
CONTROL PANEL SWITCH
VOLUME
S/W 1
S/W 2
S/W 3
S/W 4
S/W 5
: SOUND VOLUME
: GET INTO SETUP MODE
SELECT SETUP MODE (NEXT)
: SELECT SETUP MODE (PREVIOUS)
: INCREASE SETUP VALUE
: DECREASE SETUP VALUE
: EXIT SETUP MODE
BOOK KEEPING (MAIN)
CO : COIN COUNT
TK : TICKET COUNT
•
SERVICE COIN MODE
1. Push and hold S/W5.
2. Push S/W3 for service coin. (This coin is not counted on coin counter & bookkeeping)
•
CLEAR BOOKEEPING
1. Push and hold S/W5
2. Turn off the machine.
3. Turn on power switch while push and hold S/W5.
•
FACTORY RESET
1. Turn off the machine.
2. Turn on power switch while push and hold S/W3 & S/W4.
3. Hold S/W3 & S/W4 until machine turns on. (It takes about 6~10 seconds)
3-2. SETUP MODE
The first step of setup mode
•
Push S/W 1 (▼) button to get into setup mode.
•
Push S/W 1 (▼) button to move setup mode list to next.
•
Push S/W 2 (▲) button to move setup mode list to previous.
•
To change the value of selected mode, follow next step.
1. Push S/W 3 (+) or S/W 4 (-) button to increase or decrease value.
2. Push S/W 1 (▼) or S/W 2 (▲) button to enter other setup mode list.
•
Push S/W 5 (EXIT) button to exit setup mode.
•
After changing setup, turn off and turn on the machine.

BLACK HOLE
10
1._ NOT USED
-NOT USED
2. CREDIT_MODE
1_COIN_1_PLAY
-CREDIT MODE
(1 COIN 1 PLAY ~ 10 COINS 1 PLAY & 1 COIN 1~10 PLAYS)
3._Bookkeeping_
Push S/W3 & S/W4 for list
BK 0 SC 0 (BLACK HOLE COUNT / SCORE AMOUNT)
JP 0 SC 0 (JACKPOT COUNT / SCORE AMOUNT)
H2 0 SC 0 (HOLE2 COUNT / SCORE AMOUNT)
H3 0 SC 0 (HOLE3 COUNT / SCORE AMOUNT)
H4 0 SC 0 (HOLE4 COUNT / SCORE AMOUNT)
H5 0 SC 0 (HOLE5 COUNT / SCORE AMOUNT)
H6 0 SC 0 (HOLE6 COUNT / SCORE AMOUNT)
4. Ticket Feature
1/1 Ticket
-TICKET DISPENSING MODE (1/2~1/1)
*When 1/2 TICKET is selected, emits 1 TICKET that counts 2 tickets
5. JackPot_LIMIT_
VALUE= 500
-JACKPOT MAXIMUN VALUE (1-9900)
(* MAX ≥JP_SC_SCORE)
*Set maximum accumulated JACKPOT value
6._JP_ADDITION_
VALUE= 1
-JACKPOT ADDITIONAL VALUE (0-10)
*Set desired accumulated JACKPOT value per play
7. DEMO_PLAY_Eve
0030
-PLAY DEMO PER SELECTED SECONDS (20~240)
*Set to turn off demo play, or activate to play on selected time
8._DEMO SOUND_
VALUE= 0003
-PLAY DEMO SOUND PER SELECTED MINUTES (1~30)
*Set to turn off demo sound, or select time for Spacecraft sound in
between normal demo sound (demo sound is 1 minute long)
9. B_K_Hole_Score_
VALUE= 0002 -BLACK HOLE SCORE VALUE (1-99)
10. JP_SC_Setup_1
VALUE= 0250
-JACKPOT HOLE SCORE VALUE (1-9900)
(* MAX ≤ JackPot_LIMIT_VALUE)
11. Score_Setup_2
VALUE= 0002
-HOLE SCORE ‘2’ VALUE (1-99)
*2nd hole from top value is fixed
12. Score_Setup_3
VALUE= 0004 -HOLE SCORE ‘3’ VALUE (1-99)
13. Score_Setup_4
VALUE= 0006
-HOLE SCORE ‘4’ VALUE (1-99)
14. Score_Setup_5
VALUE= 0008
-HOLE SCORE ‘5’ VALUE (1-99)

BLACK HOLE
11
15. Score_Setup_6
VALUE= 0002
-HOLE SCORE ‘6’ VALUE (1-99)
*Bottom hole value is fixed
16.LED_TEST_MODE
00000
-Push S/W3 & S/W4 to test led lighting colors. (1~7)
*Test by switching the LED colors
17.THE_END
-END OF LIST

BLACK HOLE
12
4. ERROR & TROUBLE SHOOTING
■
ERROR CODES
[TICKET OWED FND]
-BALL LOADING ERROR
-TICKET ERROR
4-1. TROUBLE SHOOTING: ERROR
■
ERROR - 01
First step of trouble shooting Err1:
•
Motor does not work, follow next step.
1. Check connectors & harness.
2. Check for any loose bolts on motor assembly and rotary wheel.
3. Check ball stuck.
4. Replace motor.
5. Replace main board.
•
Motor work properly. Follow next step.
1. Check micro switch on ball loading assembly.
2. Replace micro switch.
3. Replace main board.

BLACK HOLE
13
4-2. TROUBLE SHOOTING: TICKET ERROR
■
TICKER ERROR – HELP
First step of trouble shooting ticket error:
•
If ticket box is empty, load new tickets to ticket dispenser and push ticket button.
•
If ticket button does not work, test ticket dispenser & ticket lamp
• I
f ticket dispenser does not work.
1. Check connectors & harness.
2. Replace ticket dispenser.
3. Replace main board.
•
When ticket dispenser work properly.
1. Check connectors & harness.
2. Check ticket button test.
3. Replace ticket button.
4. Replace main board

BLACK HOLE
14
4-3. TROUBLESHOOTING: SENSOR ERROR
■
GAME START OR SCORE CHECK ERROR
•
Start sound or lighting animation does not work, follow next step.
1. Check connectors & harness.
2. Replace start sensor PCB.
3. Replace main board.
•
Machine does not check score while game playing, follow next step.
1. Check connectors & harness.
2. Replace score sensor PCB.
3. Replace main board.

BLACK HOLE
15
4-4. SPRING REPLACEMENT INSTRUCTION
1. Unscrew the 4 bolts with 4mm wrench
enclosed and separate the plunger Assy’.
4. Caution! The spring may pop up to you.
Must direct the head to ground and release
the knob with pressing housing area.
2. Unscrew bolt on the knob with 2.5mm wrench
enclosed.
5. Disassemble the shaft and replace the spring.
3. Grip the shaft with Spanner (size 8) and turn
the knob anticlockwise with force given.
If the knob starts to turn with less force,
move to the next step.
6. Reassemble the shaft with reverse order.
7. Put back the plunger Assy’ to the shooter
box.box.
②

BLACK HOLE
16
4-5. HOW TO SET PSU SWITCH

BLACK HOLE
17
5. WIRING DIAGRAM
POWER BOX
SWITCHING
REGULATOR
(S/W -110/220)
MAIN BOARD
POWER CORD
6
5
4
3
2
1
6
5
4
3
2
1
0
0
4
4
2
2
0
0
4
4
2
2
6
5
4
3
2
1
7
GND
FC
AC
+12V
+12V
4
0
0
4
N
FG
L1
6
EARTH
"FG"
NOISE FILTER
CIRCUIT PROTECTOR
SUB SWITCH
6
1
EARTH
6
5
4
3
2
1
6
5
4
3
2
1
0
0
4
4
2
2
SERVICE PANEL
LCD
35155-12P
9
8
7
6
5
4
3
2
1
11
10
9
8
7
6
5
4
3
2
1
11
10
4
3
2
1
6
1
3
2
1
1
6
3
2
1
"FG"
EARTH
"FG"
9
8
7
6
5
4
3
2
1
11
10
9
8
7
6
5
4
3
2
1
11
10
35155-12P
9
8
7
6
5
4
3
2
1
SH
0
COIN
COUNTER
TICKET
COUNTER
2
1
2
18
2
1
2
14
9
5559-2P
3
2
1
3
2
19
2
SH
AUDIO-VR
3
2
1
3
2
1
35155-3P35155-3P
5557-6P
5557-6P5559-6P
CON11
EX_VOLUME
Specifica tlons for regions using 110/220 voltage area. 1/2
MG620005-1P
CON5
5557-2P
5559-2P5557-2P
SW1 SW2 SW3 SW4 SW5
3191-3R 3191-3P
CODE
0
1
2
3
4
5
COLOR
BLACK
BROWN
RED
ORANGE
YELLOW
GREEN
CODE
6
7
8
9
COLOR
BLUE
PURPLE
GRAY
WHITE
EARTH GREEN/YELLOW
A PINK
45 321
INPUT_1
EARTHEARTH
A9
A8
A7
A6
A5
A4
A3
A2
A1
A11
A10
A20
A19
A18
A17
A16
A15
A14
A13
A12
B9
B8
B7
B6
B5
B4
B3
B2
B1
B11
B10
B20
B19
B18
B17
B16
B15
B14
B13
B12
A9
A8
A7
A6
A5
A4
A3
A2
A1
A11
A10
A20
A19
A18
A17
A16
A15
A14
A13
A12
B9
B8
B7
B6
B5
B4
B3
B2
B1
B11
B10
B20
B19
B18
B17
B16
B15
B14
B13
B12
CON7
4
8
A9
A8
A7
A6
A5
A4
A3
A2
A1
A11
A10
A17
A16
A15
A14
A13
A12
B9
B8
B7
B6
B5
B4
B3
B2
B1
B11
B10
B17
B16
B15
B14
B13
B12
A9
A8
A7
A6
A5
A4
A3
A2
A1
A11
A10
A17
A16
A15
A14
A13
A12
B9
B8
B7
B6
B5
B4
B3
B2
B1
B11
B10
B17
B16
B15
B14
B13
B12
CON8
45 321
0
2
7
5
6
2
05 6 7
HIF3C_34
4
1
2
1
5025-2R
4
0
82
1
5559-2P
8
0
2F6
0
9
4
3
2
1
5559-4P
0
9
4
4
2B6
A9
A8
A7
A6
A5
A4
A3
A2
A1
A11
A10
A15
A14
A13
A12
B9
B8
B7
B6
B5
B4
B3
B2
B1
B11
B10
B15
B14
B13
B12
A9
A8
A7
A6
A5
A4
A3
A2
A1
A11
A10
A15
A14
A13
A12
B9
B8
B7
B6
B5
B4
B3
B2
B1
B11
B10
B15
B14
B13
B12
CON6
HIF3C_30
HIF3C_40
3
4
9
6
1
0
0
4
3
1
9
LAMP BUTTON
+
-
COM
NO
TICKET DISPENSER
+
-
6
5
4
3
2
1
4
3
2
1
4
3
2
14
0
6
9
3
4
1
0
EARTH
"FG" 1490-4R
5557-6P
1490-4P
0
4
2
1
5559-2P
2
1
2
1
5559-2P
2
1
2
14
0
5559-2P
2
1
BILLBOARD LAMP
JACKPOT FND
5
4
3
2
1
RIGHT
LEFT
SPEAKER
4
3
2
1
4
3
2
1
2
0
0
2
+
-
2
0
+
-
2
0
8 40W
8 40W
5239-4P
CON9
FCON21
5557-2P
EARTH "FG"
MG610004-1P
EARTH
1A7
2
1
4
0
4
0
2E7
"FG"
EARTH
2E6
1B8
SWITCHING
REGULATOR 5
4
3
2
1
GND
+5V
FC
AC
2
0
6
1
GND
4
3
2
1
4
3
2
1
4
4
0
0
4
4
0
0
5557-4P5559-4P
5559-2P
5559-2P
1F2
1D6
1B4
1212 PK 1212
6
5
4
3
2
1
9
6
4
0
4
9
5
6
7
6
5
2
0
6
5
9
7
5
4
0
6
5
4
0
6
4
0
6
5
8
5
5
6
0
2
8
6
5559-6P
7
5
4
0
6
5557-6P
5
4
3
2
1
7
5
4
0
6
35155-5P
6
5
4
3
2
1
6
5
4
3
2
1
00
22
35155-5P
2A2
5
4
3
2
1
00
22
35155-5P
2E1
5
4
3
2
1
5264-4P
2B1
4
3
2
1
2
1
5557-2P
1B3
1
0
4
0
4
0
4
MG620005-1P 2B1 MG620005-1P
MG610004-1P
EARTH
1A6
1E1
MG620005-1P
1F2
MG620005-1P
SCORE_FND
TEXT LCD
0
4
3
1
9
6
5559-6P
MG610004-1P
EARTH
1A3
D72141101B BLACK HOLE WIRE DIAGRAM

BLACK HOLE
18
CODE
0
1
2
3
4
5
COLOR
BLACK
BROWN
RED
ORANGE
YELLOW
GREEN
CODE
6
7
8
9
COLOR
BLUE
PURPLE
GRAY
WHITE
EARTH GREEN/YELLOW
A PINK
5
4
3
2
1
9
6
5
2
0
2
1
BALL UP MOTOR
COM
NO
COM
NO
0
8
FND BOX
35155-5P
5025-2P K6DG15N1
43:1
5
4
3
2
1
35155-5P
1A4
1C6
2
1
5557-2P
TICKETS OWED 5
4
3
2
1
5
4
3
2
1
CREDIT FND
5
4
3
2
1
5
4
3
2
1
9
0
4
9
0
H4P-SHF-AA
4
9
0
4
H4P-SHF-AA
1A8
COIN MACHINE
5557-4P
4
3
2
1
4
3
2
1
4
3
2
1
2
2
1
2
1
2
1
INPUT OUT
FCON27 FCON28 FCON23 FCON24
1B3 "FG"
EARTH
"FG"
EARTH
MG610004-1P
1A6 MG610004-1P
0
4
3
2
1
3
2
1
3
2
1
3
2
1
1D6
INPUT OUT
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT INPUT OUT1 INPUT OUT1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT INPUT OUT1 INPUT OUT1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT INPUT OUT1 INPUT OUT1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT INPUT OUT1 INPUT OUT1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT1
4
3
2
1
INNER LIGHT 1
4
3
2
1
4
3
2
10
4
5
64
3
2
1
4
3
2
1
4
3
2
1
5264-4P5264-4P
1D6
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT INPUT OUT1 INPUT OUT1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT1
0
4
5
6
5264-4P5264-4P 0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P 0
4
5
6
5264-4P5264-4P
0
2
0
2
9
35155-3P35155-3P
0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT1
0
4
5
6
5264-4P5264-4P
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
INPUT OUT1
0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P
0
4
5
6
5264-4P5264-4P
4
3
2
10
4
5
6
5264-4P
4
3
2
10
4
5
6
5264-4P
4
3
2
10
4
5
6
5264-4P
4
3
2
10
4
5
6
5264-4P
INNER LIGHT 2 INNER LIGHT 3 INNER LIGHT 4 INNER LIGHT 5
INNER LIGHT 6INNER LIGHT 7INNER LIGHT 8INNER LIGHT 9
INNER LIGHT 11
INNER LIGHT 10
INNER LIGHT 12 INNER LIGHT 13 INNER LIGHT 14 ROUND LIGHT 1
ROUND LIGHT 2ROUND LIGHT 3ROUND LIGHT 4ROUND LIGHT 5ROUND LIGHT 6
ROUND LIGHT 7 ROUND LIGHT 8 ROUND LIGHT 9 START LIGHT
4
3
2
1
0
4
5
6
5264-4P
4
3
2
1
0
4
5
6
5264-4P
4
3
2
1
0
4
5
6
5264-4P
4
3
2
1
0
4
5
6
5264-4P
1B4
2
1
2
10
2
3
2
1
INPUT
2
1
2
1
2
1
2
1
INPUT OUT 0
2
35155-2P
2
10
2
(LED_LIGHT-12)
(LED_LIGHT-6)(LED_LIGHT-16)
(LED_LIGHT-16)
(LED_LIGHT-16)
(LED_LIGHT-16) (LED_LIGHT-16)
(LED_LIGHT-16)
(LED_LIGHT-16) (LED_LIGHT-16)
(LED_LIGHT-16)
(LED_LIGHT-12)
(LED_LIGHT-12)
(LED_LIGHT-12)(LED_LIGHT-12) (LED_LIGHT-12)
(LED_LIGHT-12)
(LED_LIGHT-12) (LED_LIGHT-12) (LED_LIGHT-12)
(LED_LIGHT-12) (LED_LIGHT-12)
(LED_LIGHT-12)
SCORE SENSOR_RX7
(RX7)
SCORE SENSOR_TX7
(TX7)
START SENSOR RX1
(RX_1)
START SENSOR RX1
(TX_1)
5
35155-2P
35155-2P
35155-2P
Specifica tlons for regions using 110/220 voltage area. 2/2
D72141102B BLACK HOLE WIRE DIAGRAM