Andamiro DRAGON PUNCH User manual

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
^U hš š Œ” ‰“ •• Ž

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
1. Check point
– Check immediately after receiving.
– Check your power requirements.
2. Installaton Reguirements.
– Installing, must be done by an "experiauced engineer"
– Follow the introduction of this maunal.
– Use the proper wire, or it can cause a fire or electric shock.
– Be sure to locate the machine in proper place, Make the
place to install the unit level, and install safely using
appointed parts.
– Install the Machin in level groud
3. Shipping the unit
– If the machine is damaged drug transportation,
do not install, accident or problem.
Y
precaution

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
a. Power requirement : private use 110V or 220V
b. Power consumption : (approx) 80W
c. Dimensions : W830 D1115 H2200
d. Mass : (approx) 120Kg
1115
2200
830
SPAC
‚ Z„

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
Foot hold (casting)
Foot hold

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
The backside
FND PCB
trans speaker
wiring
main PCB power PCB
powerswitch
coin box
AC code
7aEOe oI contentV
‚ \„

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
Upper mecanism
roller
punchball
safety bar
spring
main spring
shaft
(including
processed MC)
board pad
(firingrubber)
sensor
micro switch
solenoid 2EA
(left side, right side)
]
7aEOe oI contentV

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
Main of parts
FND PCB
disuse
FND in
FND 1
FND 2
‚ ^„
POWER PCB
Power in
Power
Trans in
Trans out
Main PBC in
FND in
Countermachine
& test button
Micro switch
Main PCB
connection1
Disuse
Main PCB
1
2
3
4
5
6
7
8
connection 2
12.
Solenoid 1
13
12
11
10
9
13. Solenoid 2

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
MAIN PCB
or
12
1
11
or
2
3 or
4 5 6 7 8 9 10
1. power connection
2. disuse
3. deep switch
4. power connection1
5. FND output
6. 2
7. slot
8. sensor
9. power connection1
10. FND2 output
11. Volume
12. Speaker
_
Main of parts
DGS
DGM
X
D-SM
D-SD
D - M

Table of contents Version: 4T
8time Back up function on = always auto back up/ off = always do not back up
A rightscore will become 1 point down ateach game
~ Dragon punch −ticket new version Ver 4.T~
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
Table of contents
COIH
PLAY
1
2
3
4
5
6
7
8
1
1
off
off
off
1
2
on
off
off
2
2
off
on
off
2
3
off
off
on
3
2
on
on
off
3
3
on
off
on
4
2
off
on
on
4
3
on
on
on
Demo Sound
on
Game over, in 15sec, if you don't pull the rope
Game over, if you don't hit the ball in 30sec
off
Game over, in 30sec, if you don't pull the rope
Game over, if you don't hit the ball in 60sec
on
Use Ticket
on
AVE. TICKET OUT 12,335
off
AVE. TICKET OUT 10,335
on
Back upfunction
on
Dip 7 on
BONUS TYPE
FND
TICKET
OUT
1.
STANDARD
TICKET OUT
XXX1
XXX2
XXX3
XXX4
XXX5
XXX6
XXX7
XXX8
XXX9
XXXO
1
2
3
4
5
6
7
8
9
O
4.5
AVE. TICKET OUT
2.
SMALL JACKPOT
XX11
XX22
XX33
XX44
XX55
XX66
XX77
XX88
XX99
XXOO
3O
O
2.7
AVE. TICKET OUT
3.
MIDDLE JACKPOT
X111
X222
X333
X444
X555
X666
X777
X888
X999
XOOO
8O
O
O.72
AVE. TICKET OUT
4.
BIG JACKPOT
7777
8888
1OO
2OO
3
AVE. TICKET OUT
TOTAL
TICKET OUT
OPTION
1.+2.+3.+4. X n/n.
1O.335
TOTAL AVE. TICKET OUT
Dip 7 OFF
FND
TICKET
OUT
1.
STANDARD
TICKET OUT
XXX1
XXX2
XXX3
XXX4
XXX5
XXX6
XXX7
XXX8
XXX9
XXXO
1
2
3
4
5
6
7
8
9
O
4.5
AVE. TICKET OUT
2.
SMALL JACKPOT
XX11
XX22
XX33
XX44
XX55
XX66
XX77
XX88
XX99
XXOO
3O
O
2.7
AVE. TICKET OUT
3.
MIDDLE JACKPOT
X111
X222
X333
X444
X555
X666
X777
X888
X999
XOOO
8O
O
O.72
AVE. TICKET OUT
4.
BIG JACKPOT
6666
7777
8888
1OO
1OO
3OO
5
AVE. TICKET OUT
TOTAL
TICKET OUT
OPTION
1.+2.+3.+4. X n/n
12.335
TOTAL AVE. TICKET OUT
[9]

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
Table of contents(3T)
COIN
PLAY
off
off
off
on
off
off
off
on
off
off
off
on
on
on
off
on
off
on
off
on
on
on
on
on
Demo Sonund
on
Game over, in 15sec, if you don't pull the rope
Game over, if you don't hit the ball in 3Osec
off
Game over, in 3Osec, if you don't pull the rope
Game over, if you don't hit the ball in 6Osec
on
Use Ticket
on
Normal−1 Ticket beat the high score −5 ticket
off
Normal−1 Ticket beat the high score −1O ticket
on
Back up function
on
8time Back up function on = always auto back up / off = always do not back up
A high score will become 1 point down at each game

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
Contents list
HAME
QUAHTITY
SPECIFIC
case(including lron parts)
1
Iron
FRP
2
FRP
Urethane protector
1
Urethane
Foothold
1
Casting
PCB(Main,power,FND)
1
PC
1
Bulletproof PC
Punchball
1
Leather, Tube
Sticker
10
adhesive sheet
Trans
1
Slot
1
Wiring
1set
Speaker
1
Upper Mechanism Hame
QUAHTITY
SPECIFIC
Solenoid 1.5k
1
Solenoid 1.5k
Proccessed lron parts
Shaft1, Shape parts1, Stain pin1
Proccessed lron parts
Spring
Big 2, Middle2, Small2
Heat treatment
Bearing
2
Punchball pad
1
15T board, 20T firing rubber
roller, safety rope
Each 1
Porter sensor, Micro switch
Each 1
Processed MC
1
MC
Safety bar
1
[1O]
Contents list

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
Trobleshooting
SYMPTOM
CHECK (CAUSE)
CORRECTIOH
1. NO power
The power code isdisconnected.
The power switch is off.
The power code is disonnected
Plug out.
Switch on.
Replace thefuse by new one
(proper size)
2. The power ison, but FND
viewer doesn't work
Check the FND connector.
Plug in the FND connector.
The slot doesn't work.
Check thepower switch.
3. The slot is doesn't work
Check the power switch.
Somethingiswrong with slot.
Switch on.
Repair the slot.
4. No sound
Somethingiswrong with speaker.
Check the speaker connector
Repair the speaker.
Connect propenly.
5. Unableto pull the
punchball
Check the power.
Makemistakesinconnecting
solenoid.
The couse of solenoid trouble
Switch on.
Connect thesolenoid properly.
Repiace the solenoid.
6. Punchball is pulled of
itsell Duringthe game.
Not gather in upon shape & I
shape partsbecausethetension
of spring is warn away.
Make the tension of spring strong
or exchange it.
7. Not counted a score in
spite of hiltingthe punchball
Microswitch trouble, or
disconncetion
Replace themiaroswitchwith
new one.
8. Replacethepunchball by
another one
Openthe cover,releaseM10bolt,
exchange them in reverse order.
Trobleshooting
[11]

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
The method of assembling 3pieces
a b
a. The lower foothold :
Release M12 bolts (10EA),
separate the body.
Toput together, do that in
reverse order.
b. The upper mechanism:
Release M12 bolts (10EA), take
the head apart. (check the solenoid,
micro switch, sensor wiring, and the
connector) To put together, do thaat
in reverse order.
The method of controling the tension or spring The method of exchange the punchball
Loosen the bolt and fix the spring
by adjusting the bottom side of it You should release M10 bolt.
The method of exchange the micro switch The method of fixing the FRP cover
Replaceit after releasing
M3 bolts (2EA) Assemble thefront part first, fix the cover with a tool
[12]
Assembling

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
A component inside of the head part
letter shape
manufacturedpart
letter shape
manufacturedpart
No 1 solenoid No 1 solenoid
No 1 solenoid function
It pulls over a punching ball, after inseerting a coin to start a game.
More details : a ቯ-shaped part and No 1 solenoid are connected to a ෡-shaped
part and when No 1 solenoid is pulled over, the punching ball can be pulled on,
separate from a shaft. In ෡-shaped part breakdown connected to No 1 solenoid,
the punching ball cant't be pulled.
No 2 solenoid function
After the pinching ball is hit, FND scores up and No 2 solenoid works to make
the punching ball go up. More details : a ቯ-shaped part and No 1 solenoid are
connected to a ෡-shaped part and when No 2 solenoid is pulled over, the
punching ball can go up, separate from a shaft. In ෡-shaped part breakdown
connected to No 2 solenoid, the punching ball can't go up.
[13]

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
How to exchange the ት- shaped part in a breakage
1. See pictute ෡
Cut cable tie with scissors
2. See pictute ②
Using an I head screwdriver,
remove a tighten-up E-ring to prevent the
ት-shaped part and from sliding off.
3. See pictute ⊙
After removing the E-ring,
remove the broken ት- shaped part and
grease a new ት- shaped part and fasten it.
4. See pictute ④
Put a cable tie right to left under
the ት- shaped part, tight it up appropriately and
finish at a forty-five angle.
¥To tighten up only with a cable tie can prevent
the ት-shaped part from sliding off without fastening
an E-ring. Another cable tie tightening will make it
easier to prevent the part from sliding off.
[14]

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
The lower bottom Body The top head
Assembly order
1. fix a body to the
lower bottom and
screw 12mmbolts
(10ea)front,back,
right and left.
2. Connect a power
line (AC code)
3. Loose with a screwdriver
the direct connection pieces(4mm)
fastening the top head cover.
4. Open the head cover.
[15]

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | [phone] | +1.561.391.7200
Assembly order
5. Fasten the top head onto the
body with 12mm bolts(10EA)
front, back, right and left.
● Note : Back 4EAbolts
should be fasten only
with spring washer.
7. Loose direct connection
pieces (4mm) right and left,
and fix the pieces again
6. Stand behind the machine holding
the cover and put on the cover to
attach completely to the top head
from the front.
● Note : Use an I-head driver.
8. Connect wirings from the top
head and wirings from the body.
Connection order.
● Solenoid 2EAe Sensor
Micro switch.
[16]