Coastal Amusements The Balloon Game User manual

ASSEMBLY INSTRUCTIONS
65” VIDEO GAME CABINET
1950 Swarthmore Ave. Lakewood, NJ 08701
[phone]
[e-mail]
http://www.coastalamusements.com
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

2
Place the shipping pallet near the location where the game is to be installed and carefully
remove the shipping carton.
Image of boxed game.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

3
Pallet with carton removed
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

4
Carefully unpack and confirm that the following components are included.
 Console assembly
 Pedestal assembly
 Marquee assembly
 Side light pillars (x2)
 Horizontal square tubes (x2)
 Monitor service hatches (x2 and attached to monitor)
 Wire box cover (attached to pedestal)
 Monitor housing assembly
See the following photos for reference.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

5
Side light pillars
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

6
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

7
Unloop the two harnesses on the front of the pedestal assembly and feed the wires through the
horizontal tubes. Attach the tubes to the pedestal assembly using the nuts and washers attached
to the pedestal.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

8
Place the console in front of the tubes, and feed the wires through the holes in the console.
Remove the bolts and washers from the console and place console up against the horizontal
tubes. Then bolt the tubes to the console. Be careful not to pinch the wiring.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

9
Now connect the harnessing that goes from the pedestal to the console. There is an HDMI
connector, an AC power connector, and 3 other harnesses. They are shown in the following
photos.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

10
Now that the pedestal is securely attached to the console, you can now install the monitor.
WARNING: TO AVOID DAMAGE OR INJURY, DO NOT INSTALL THE
MONITOR HOUSING TO THE PEDESTAL UNLESS THE CONSOLE IS
SECURELY ATTACHED IN ORDER TO STABILIZE THE ASSEMBLY.
Place some foam, bubble wrap or cardboard over the horizontal tubes to prevent scratches.
Open the box containing the monitor assembly. Remove the two bolts and washers, and the two
screws, as shown in the following photo.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

11
Place the monitor box in front of the console. Using at least two people, with at least one on
each side, carefully lift the monitor (using side handles) over the control panel and bring it
towards the pedestal.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

12
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

13
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

14
The two weld nuts circled in the picture will slide into the slots on the pedestal.
Remove the wire box cover, and use the bolts that you took out of the monitor to secure the
assembly to the mounting. Do not tighten completely.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

15
Install the two bottom screws that you removed from the monitor housing earlier through the
bottom mounting brackets.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

16
Remove the service hatches and connect the four harness connectors by feeding the wires
through the hole on the right side (circled in red in the previous photo). The following photos
show the connections. Tuck all of the extra wire into the monitor housing.
Remove the screws along the sides of the monitor and use them to connect each of the side
pillar harnesses to the sides of the monitor housing.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

17
Slightly loosen the screws holding the brackets on the marquee to help align during installation.
Connect the marquee power to the harness inside the monitor housing.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

18
Secure the marquee using the 8-32 ½” screws. Tighten all screws.
Reinstall the monitor service hatches, and install the wire box cover using the 8-32 ½” screws.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

19
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)

20
When the game is placed in its final position, lock the casters to prevent the game from moving.
You can now connect the AC power cord to the game and turn the power on.
If you have any questions or problems, call Coastal Amusements at
[phone]. Technicians are available Monday through Friday from
08:00 to 16:30 EST.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)