Coaster 101064 User manual

COASTER FINE FURNITURE
101063
BAR TABLE
ASSEMBLY INSTRUCTION
www.coastercompany.com
2012/07/24
PAGE 1 OF 6

TOP SHELF
GLASS SHELF
BOTTOM SHELF
SIDE BOARD
TOP BAR
BOTTOM BAR
GLASS HOLDER
BOTTOM
STEEL GUARD
BOTTLE GUARD
GLASS SHELF
STEEL GUARD
CAM BOLT
CAM LOCK
ITEM NO:101064
ASSEMBLY INSTRUCTION
PAGE 2 OF 6
www.coastercompany.com

GLUE
GLASS METAL
GLASS BOLT
SMALL BOLT
ROUND IRON
PLASTIC
WOOD DOWEL
LABEL
LARGE ALLEN BOLT
MEDIUM ALLEN BOLT
SMALL ALLEN BOLT
SMALL WASHER
LARGE BOLT
LARGE WASHER
CAP
SCREW
SMALL ALLEN KEY
LARGE ALLEN KEY
SPRING WASHER
ALLEN BOLT
SMALL PLASTIC
ASSEMBLY INSTRUCTION
PAGE 3 OF 6
www.coastercompany.com
ITEM NO.:101064

www.coastercompany.com
1.Screw CamBolt(1)and Wood Dowel(9)
and Round Iron(7)onto Top Shelf(A).
on the screw hole after
tightening
STEP2.
STEP1:
ASSEMBLY INSTRUCTION
PAGE 4 OF 6
www.coastercompany.com
ITEM NO.:101064
Install Glass Holder(G)
using Screw(18)
2.Attach Round Iron(7)using
Small bolt(6)and attach
Top Bar(E)using Small Bolt(6)
3.Insert Side Board(D)into
Top Shelf(A)then install
CamLock(2)and place Label(10)
4.Screw Glass Metal(4)and
Screw(18)onto Side Board(D)
1.Place Plastic(8)into Small Bolt(6)then
install Small Bolt(6)and Glass Metal(4)
onto Glass Shelf(B)and then tighten
with Glass Bolt(5)
2.Place Plastic(8)into Small Bolt(6)
then tighten with Top Bar(E).

www.coastercompany.com
STEP3:
ASSEMBLY INSTRUCTION
PAGE 5 OF 6
www.coastercompany.com
ITEM NO.: 101064
1.Place Plastic(8)into Top Bar(E),screw CamBOLT(1)and
Wood Dowel(9)onto Side Board(D). Insert Bottom Shelf(C),
into Side Board(D)and tighten using CamLock(2)
2.Place Spring Washer(21)and Large Washer(16)onto Large Allen Bolt(11)
and then screw it to Bottom Shelf(C)with Top Bar(E)and Plastic(8)
3.Screw Bottle Guard(I)onto Side Board(D)using Screw(18),and screw
Bottle Guard(I)to Glass Shelf(B)using Small Allen Bolt(13)
and Small Washer(14)
4.Place Plastic(8)and Large Bolt(15)onto Bottom Bar(F),then install
Bottom Shelf(C)with Top Bar(E)using Bottom Bar(F).
Align Bottom Bar(F)and Bottom Shelf(C)then connect with
Bottle Guard(I).Then screw Bottle Guard(I)to the screw with Side Board(D)
using Screw(18)
5.Screw Medium Allen Bolt(12)onto Bottom Shelf(C)and assemble Bottom Bar(F)
with the Bottom Shelf(C)using the Plastic(8).Add Cap(17)to the
Bottom Bar(F)and make the sure all screws are tightened.

STEP 4.
ASSEMBLY INSTRUCTION
PAGE 6 OF 6
www.coastercompany.com
ITEM NO.:101064
1.Insert Bottom Steel Guard(H)onto Bottom Shelf(C)
2.Assemble Glass Shelf Steel Guard(J)with Glass Shelf(B)
using Allen Bolt(22)and Small Plastic(23).