Coaster Bennington 222711KW User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
California King Bed
222711KW
(B1-B3)
PAGE 1 OF 5
REVISION 0 : 12/16/2021
COASTERFURNITURE.COM

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
B1 (BOX 1)
AHEADBOARD PANEL 1PC BHEADBOARD BOTTOM RAIL 1PC
CRIGHT
HEADBOARD LEG 1PC DLEFT HEADBOARD LEG 1PC
B2 (BOX 2)
EFOOTBOARD 1PC
B3 (BOX 3)
F BED RAIL 2PCS GBED SLAT SUPPORT
WITH LEVELER 8PCS
H BED SLAT 4PCS
HB
222711KW (B1)
FROM BOX 1
HEADBOARD
COMPLETE
1PC
COASTERFURNITURE.COM
PAGE 2 OF 5
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
30 MINUTES
ITEM:222711KW (B1-B3)
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
NOTE:
E1PC
FOOTBOARD
222711KW(B2)
FROM BOX 2

ITEM:222711KW(B1-B3)
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 222711KW (B1)
1BOLT
(∅5/16" x 50MM- RBW) 12PCS 2LOCK WASHER (∅5/6" - RBW) 12PCS
3FLAT WASHER
(∅5/16" - RBW) 12PCS 4ALLEN WRENCH (4MM - RBW) 1PC
Z-B3 (BOX 3) - HARDWARE PACK IS LOCATED IN 222711KW (B3)
5THREADED BOLT
(∅5/16" x 3-1/2" - RBW) 8PCS 6HEX NUT (∅5/16" x 14mm - RBW) 8PCS
7WRENCH
(14MM - RBW) 1PC 8(∅5/16'' - RBW) 8PCS
9FLAT HEAD SCREW
(∅4 x 30mm - RBW) 8PCS
NOTE:
COASTERFURNITURE.COM
PAGE 3 OF 5
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
HALF ROUND NUT

ITEM:222711KW(B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 4 OF 5
A
B
C
D
1
2
3
4
3
2
1
4
5
F
8
6
7
F
F
E

ITEM:222711KW(B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COMPLETE
COASTERFURNITURE.COM
PAGE 5 OF 5
H
F
9
G
H