Coaster 300509 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
COASTERFURNITURE.COMPAGE 1 OF 2
PAGE 1 OF 6
300509 (B1&B2)
Daybed
REVISION 0 : 06/27/2016
REVISION 1 : 07/11/2016
REVISION 2 : 06/07/2017
REVISION 3 : 12/06/2019

ITEM:300509 (B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
PARTS IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
PAGE 2 OF 6 COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
LEFT SIDE PANEL
RIGHT SIDE PANEL
F
TRUNDLE SIDE PANEL
G
H
A
B
C
1PC
1PC
2PCS
D 4SETS
ROLL SLAT (7PCS)
LEG
E 4PCS
B1 (BOX 1)
BACK PANEL 1PC
B2 (BOX 2)
FRONT RAIL 1PC
1PC
BACK RAIL
I 1PC
TRUNDLE
FRONT PANEL
J 1PC
TRUNDLE
BACK PANEL
K 6SETS
CASTER WITH SCREW

ITEM:300509 (B1&B2)
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
HARDWARE IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
PAGE 3 OF 6 COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
1
2
3
6
16PCS
4PCS
3PCS
16PCS
SHORT BOLT
(M8 x 20MM - RBW)
MEDIUM BOLT
(M6 x 35MM - RBW)
LONG BOLT
(M6 x 45MM - RBW)
FLAT HEAD SCREW
(M4 x 32MM - RBW)
7
43PCS
LOCK WASHER
(15/64” x 13 Ø - RBW)
8
1PC
SMALL ALLEN WRENCH
(M4 x 65MM - BLK)
53PCS
FLAT WASHER
(15/64” x 19 Ø - RBW)
1PC
BIG ALLEN WRENCH
(M5 x 65MM - BLK)
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 300509 (B2)

ITEM:300509 (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 1
PAGE 4 OF 6 COASTERFURNITURE.COM
STEP 2
2
7
E
B
A
1
8
G
H
543
7345
G
A
F
B
H
1.1
1.2

ITEM:300509 (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 3
PAGE 5 OF 6 COASTERFURNITURE.COM
STEP 4
* Turn the trundle front & back panels upside down.
A
D
G
D
H
F
B
6
D
K
J
I

ITEM:300509 (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 5
PAGE 6 OF 6 COASTERFURNITURE.COM
STEP 6 STEP 7
COMPLETE
6
D
D
D
C
81
J
I
C