Coaster 121281 User manual

DINING TABLE
121281 (B1 & B2)
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
PAGE 1 OF 6
www.coastercompany.com
REVISION 0: 05/15/2018

PARTS IDENTIFICATION
www.coastercompany.com
A
B
C
B1 (BOX 1)
D
E
B2(BOX 2)
PAGE 2 OF 6
121281 (B1 & B2)
Warning!
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
ASSEMBLY TIPS:
PART NAME FIGURE
TOP
LEAF
CROSSBAR
DECORATIVE
WOOD BLOCK
LEG FRAME

HARDWARE IDENTIFICATION
www.coastercompany.com
PAGE 3 OF 6
121281 (B1 & B2)
Warning!
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
ASSEMBLY TIPS:
HARDWARE NAME FIGURE QTY
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 121281 (B1)
SHORT BOLT
LONG BOLT
LOCK WASHER
FLAT WASHER
ALLEN WRENCH
(5/16" x 38mm - BLK)
(5/16" x 85mm - BLK)
(8mm - BLK)
(8 x 19 x 2mm - BLK)
(4 x 30 x 80mm - BLK)

www.coastercompany.com
PAGE 4 OF 6
121281 (B1 & B2)
STEP 1
STEP 2

www.coastercompany.com
PAGE 5 OF 6
121281 (B1 & B2)
STEP 3
STEP 4

www.coastercompany.com
PAGE 6 OF 6
121281 (B1 & B2)
STEP 5
COMPLETE