Coaster 950170 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0 : 03/15/2018
PAGE 1 OF 9 COASTERFURNITURE.COM
CURIO CABINET
950170
REVISION 1 : 09/12/2019

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
COASTERFURNITURE.COM
ASSEMBLY TIME 50 MINUTES
PARTS IDENTIFICATION
2PCSA DOOR GLASS
1555x279mm
950170
ITEM:
WARNING!
PAGE 2 OF 9
2PCSB SIDE GLASS
1576x345mm
1PCC BACK GLASS
1576x567mm
2PCS
DPLASTIC BAR
4PCSE SHELF SUPPORT
1PCF TOP WOOD PANEL
1PC
GBOTTOM WOOD PANEL

COASTERFURNITURE.COM
PAGE 3 OF 9
PARTS IDENTIFICATION
4PCSH GLASS SHELF
565x250mm
ASSEMBLY INSTRUCTIONS
950170
ITEM:
HARDWARE IDENTIFICATION
4PCS
1PLASTIC FEET
(∅44 x 18mm)
8PCS
2PCS
7
2PCS
8PCS
ALLEN BOLT-LARGE
(1/4" x 1-3/4")
WASHER
(1/4" x 16mm)
HANDLE
(40mm)
METAL CONTACT
(40mm)
2
8
34PCS
ADHESIVE
(38 x 42mm)
9
4PCS 4PCS
4PCS
HINGE
(40mm)
HINGE INSERT
(∅12 x 9mm)
SCREW
(∅8 x 22mm)
4
10
51PC
ALLEN KEY
(4mm)
11
4PCS
METAL WITH ADHESIVE
(38mm)
616PCS
SUCTION CUP
(∅20 x 28mm)
12
13
14
15
16
8PCS
SMALL BOLT
(∅7 x 6mm) 16PCS
BOLT
(∅8 x 30mm)
4PCS
PLASTIC MAGNET
(19mm) 4PCS
STICKER
(∅20mm)

COASTERFURNITURE.COM
PAGE 4 OF 9
ASSEMBLY INSTRUCTIONS
950170
ITEM:
STEP 1
STEP 2
12
1
2
3
G
1
2
2
3
12
1
E
D
C
E
E
E
E
G
12 1
2
3
2
2
3
3
1
12
1
12

COASTERFURNITURE.COM
PAGE 5 OF 9
ASSEMBLY INSTRUCTIONS
950170
ITEM:
STEP 3
STEP 4
1
2
3
F
2
B
B
14 15
1415
3
2
3
2
2
3
1415
1415
1415
1415
1415
1415
1415
14
15
14
15
14
15
14
15
14
15
14
15
14
15
14
15

COASTERFURNITURE.COM
PAGE 6 OF 9
ASSEMBLY INSTRUCTIONS
950170
ITEM:
STEP 5
STEP 6
H
H
H
H
5
4
4
5
8
8
5
4
5
48
45
8
5
4

COASTERFURNITURE.COM
PAGE 7 OF 9
ASSEMBLY INSTRUCTIONS
950170
ITEM:
COMPLETE
STEP 8
STEP 7
9
11
6
7
9
11
11
10
9
7
7
7
7
11
10
11
16
16

COASTERFURNITURE.COM
PAGE 8 OF 9
ASSEMBLY INSTRUCTIONS
950170
ITEM:
Product Size : 603 X 367 X 1632 H (MM)
Product Size : 23 3
4" X 14 1 2" X 64 1 4"
21 5
8"
550 mm
11 3
8"
288 mm
wood
23 3
4" X 14 1 2" X 1"
603X367X25mm
61 1
2"
1563 mm
11 3
4"
299 mm
12 1
8"
308 mm
12 1
4"
312 mm
12 1
8"
308 mm
12 1
2"
319 mm
10 1
2"
267 mm
64 1
4"
1632 mm
23 3
4"
603 mm
14 1
2"
367 mm
wood
23 3
4" X 14 1 2" X 1"
603X367X25mm
glass
22 1
4" X 9 7 8" X 1 4"
564X250X5mm
glass
22 1
4" X 9 7 8" X 1 4"
564X250X5mm
glass
22 1
4" X 9 7 8" X 1 4"
564X250X5mm
glass
22 1
4" X 9 7 8" X 1 4"
564X250X5mm
Note : Dimension tolerance ±5%

This tip restraint must be attached to a wall STEP 2
stud using long screw enclosed.
STEP 1
STEP 3
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of the furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
PAGE 4 OF 4 COASTERFURNITURE.COM
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed. Confirm that the strap is
securely laced and locked.
ITEM: 205443
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
Failure to detach this restraint before moving the furniture may result in injury and damage.
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
a plastic wall
950170
PAGE 9 OF 9