Coaster 203485 User manual

COASTERFURNITURE.COM
REVISION 1 : 11/04/2020
REVISION 0 : 05/01/2014
PAGE 1 OF 3
203485
Chest
COASTER FINE FURNITURE
ASSEMBLY INSTRUCTIONS
Fine Furniture for every stage of life

WARNING !
1 . Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2 . This product is for home use only and not intended for commercial establishment.
ASSEMBLY INSTRUCTIONS
1 . Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
ASSEMBLY TIPS:
COASTERFURNITURE.COM
ASSEMBLY TIME 10 MINUTES
PAGE 2 OF 3
A1PC
PARTS IDENTIFICATION
NOTE:
Philips head screw driver in the assembly process ; however, manufacturer does not provide the item
ITEM: 203485
CHEST
STEP 1
A

WALL
STEP 3
Place the chest into position so both mounting brackets are vertically in line. Lace the end of the restraint
strap through the larger hole in each mounting bracket.Bring both ends together and slide the flat end
through the locking end and draw it through until all slack is removed.Confirm that the strap is securely
laced and locked.
This tip restraint must be attached to a wall
stud using long screw enclosed.
STEP 1
Attach a bracket securely to the back top rail of the
chest using short screw provided,through the smaller
hole.
STEP 2
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of chest.Attached to the wall
stud using the long screw provided,through the
smaller hole.
WALL
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitle for proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and damage.
FURNITURE TIPING RESTRAINT
PAGE 3 OF 3 COASTERFURNITURE.COM
ITEM: 203485
ANTI-TIPPING INSTALLMENT INSTRUCTIONS

INNER SIZE OF DRAWER : 5.28" X 12.68" X 24.01"
COASTERFURNITURE.COM
Note: Dimension tolerance ±5%
31.50"
16.52"
0.59"
45.04"
48.00"
23.62"
25.83"
7.09"
10.61"
ITEM: 203485
16.52"
31.50"