Coaster Eastern King 300523KE User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
300523KE (B1-B5)
PAGE 1 OF 15
COASTERFURNITURE.COM
Eastern King Storage Bed
REVISION 0 : 11/30/2015
REVISION 1 : 12/28/2015
REVISION 2 : 06/09/2016
REVISION 3 : 08/20/2016
REVISION 4 : 09/26/2016
REVISION 5 : 07/17/2019

ITEM:300523KE (B1-B5)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
B1 ( BOX 1)
A
HEADBOARD
PANEL
1PC
B2 ( BOX 2)
B
FOOTBOARD
PANEL
1PC
B3 ( BOX 3)
C
BED RAIL 2PCS
D
HEADBOARD &
FOOTBOARD
LEG
4PCS
E
CENTER RAIL 2PCS
F
BED SLAT
SUPPORT WITH
LEVELER
4PCS
H
DRAWER FRONT
PANEL (WITH "1"
LABEL)
4PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
90 MINUTES
PARTS IDENTIFICATION
PAGE 2 OF 15

ITEM:300523KE (B1-B5)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
B4 (BOX 4)
G
SET OF GLIDES 8SET M
SIDE FRAME
(WITH "6"LABEL)
2PCS
I
DRAWER BACK
PANEL
(WITH "2" LABEL)
4PCS N
SMALL RIGHT
CENTER PANEL
(WITH"7"LABEL)
2PCS
J
DRAWER SIDE
PANEL
(WITH"3"LABEL)
8PCS O
SMALL LEFT
CENTER PANEL
(WITH"8"LABEL)
2PCS
K
DRAWER BOTTOM
PANEL
(WITH "4"LABEL)
4PCS P
LARGE CENTER
FRAME
(WITH"9"LABEL)
2PCS
L
DRAWER
SUPPORT BAR
(WITH "5"LABEL)
8PCS Q
SUPPORT BAR
(WITH"10"LABEL)
2PCS
B5 (BOX 5)
R
ROLL SLAT
(14PCS)
1SET FB
300523KE (B2&B3)
*FROM BOX 2 &
BOX 3
FOOTBOARD
1PC
HB
300523KE (B1&B3)
*FROM BOX 1 &
BOX 3
HEADBOARD
COMPLETE
1PC
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
90 MINUTES
PARTS IDENTIFICATION
PAGE 3 OF 15

ITEM:300523KE (B1-B5)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B3 (BOX 3) - HARDWARE PACK IS LOCATED IN 300523KE (B3)
1
PLASTIC DOWEL
(4 x 25MM - BLK)
(WITH"A"LABEL)
24PCS 7
MEDIUM FLAT HEAD
SCREW
(CSKM4 X 25MM - RBW)
(WITH"G"LABEL)
14PCS
2
SHORT BOLT JCBCW
(M6 x 40MM - BLK)
(WITH"B"LABEL)
24PCS 8
LONG FLAT HEAD
SCREW
(CSKM4 X 32MM - RBW)
(WITH"H"LABEL)
47PCS
3
LONG BOLT JCBC (M6
x 40MM - RBW)
(WITH"C"LABEL)
18PCS 9
LONG FLAT HEAD
SCREW
(CSKM4 X 50MM - RBW)
(WITH"I"LABEL)
32PCS
4
PLASTIC GLIDE (20MM -
WHT) (WITH"D"LABEL)
20PCS 10
ALLEN WRENCH (M4
X 65MM-BLK)
(WITH"J"LABEL)
1PC
5
NAIL
(20MM - RBW)
(WITH"E"LABEL)
48PCS 11
LOCK WASHER (20MM-
RBW) (WITH"K"LABEL)
16PCS
6
SHORT FLAT HEAD
SCREW (CSK3.5 x 16MM-
RBW) (WITH"F"LABEL)
48PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
PAGE 4 OF 15

ITEM:300523KE (B1-B5)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2 STEP 3
STEP 4
COASTERFURNITURE.COM
PAGE 5 OF15
4
I
I
1
J
I
J
H
9
(WITH "I" LABEL)
(WITH "3" LABEL)
(WITH "1" LABEL)
(WITH "3" LABEL)
(WITH "2" LABEL)
(WITH "4" LABEL)
(WITH "E" LABEL)
K
5
(WITH "H" LABEL)
(WITH "5" LABEL)
8
L

ITEM:300523KE (B1-B5)
ASSEMBLY INSTRUCTIONS
STEP 5
STEP 6
COASTERFURNITURE.COM
PAGE 6 OF 15
6
(WITH "F" LABEL)
Without wheel is attach
to drawer front
Without wheel is attach
to drawer
front
With wheel is attach to
drawer back
With wheel is attach to
drawer back
6
G
DL
DR
G
With wheel is facing panel with the cut edge
With wheel is facing panel with
the cut edge
CL
G
G
6
6
4
CR
(WITH "F" LABEL)
(WITH "D" LABEL)
(WITH "F" LABEL)
M
(WITH "F" LABEL)
(WITH "6" LABEL)

ITEM:300523KE (B1-B5)
ASSEMBLY INSTRUCTIONS
STEP 7
STEP 8
COASTERFURNITURE.COM
PAGE 7 OF 15
G
(WITH "F" LABEL)
(WITH "A" LABEL)
7.1
4
N
CR
6
With wheel is facing panel with
the cut edge
CL
O
6
4
1
G
(WITH "7" LABEL)
1
With wheel is facing panel
with the cut edge
(WITH "F" LABEL)
(WITH "A" LABEL)
(WITH "8" LABEL)
(WITH "D" LABEL)
7.2
7.3
8.1
8.2
8.3
(WITH "D" LABEL)

ITEM:300523KE (B1-B5)
ASSEMBLY INSTRUCTIONS
STEP 9 STEP 10
STEP 11
COASTERFURNITURE.COM
PAGE 8 OF 15
1
(WITH "A" LABEL)
(WITH "10" LABEL)
4
Q
P
M
P
M
(WITH "9" LABEL)
(WITH "D" LABEL)
(WITH "A" LABEL)
1
(WITH "6" LABEL)
(WITH "9" LABEL)
(WITH "6" LABEL)

ITEM:300523KE (B1-B5)
ASSEMBLY INSTRUCTIONS
STEP 12
STEP 13
COASTERFURNITURE.COM
PAGE 9 OF 15
10
(WITH "J" LABEL)
(WITH "6" LABEL)
P
2
M
O
N
N
O
(WITH "B" LABEL)
M
(WITH "8" LABEL)
(WITH "7" LABEL)
(WITH "8" LABEL)
(WITH "6" LABEL)
(WITH "9" LABEL)
(WITH "7" LABEL)

ITEM:300523KE (B1-B5)
ASSEMBLY INSTRUCTIONS
STEP 14
STEP 15
COASTERFURNITURE.COM
PAGE 10 OF 15
Q
(WITH "10" LABEL)
Q
2
2
10
(WITH "B" LABEL)
(WITH "B" LABEL)
(WITH "J" LABEL)
(WITH "10" LABEL)
10
(WITH "J" LABEL)