Coaster 105183 User manual

105183
DINING ARM CHAIR
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
REVISION 0: 12/14/2017
REVISION 1: 09/14/2018
www.coastercompany.com
PAGE 1 OF 4

PART NAME FIGURE QTY
Warning!
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
ASSEMBLY TIPS:
15 MINUTES
PARTS IDENTIFICATION
AV
BV
CV
DV
EV
BACK FRAME
FRONT LEG
SEAT CUSHION WITH FRAME
LEFT ARM REST
RIGHT ARM REST
1PC
1PC
1PC
1PC
2PCS
NOTE: QUANTITIES SHOWN ARE FOR ONE CHAIR.
www.coastercompany.com
PAGE 2 OF 4

HARDWARE NAME FIGURE QTY
Warning!
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
ASSEMBLY TIPS:
NOTE: QUANTITIES SHOWN ARE FOR ONE CHAIR.
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
NOTE: PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
1
2
3
4
5
6
7
(5/16" x 76mm - RBW)
LONG BOLT
MEDIUM BOLT
(5/16" x 64mm - RBW)
SHORT BOLT
(5/16" x 38mm - RBW)
LOCK WASHER
(8mm - RBW)
FLAT WASHER
(8 x 19 x 2mm - RBW)
ALLEN WRENCH
(4 x 30 x 80mm - RBW)
SCREW
(#8 x 38mm - RBW)
www.coastercompany.com
PAGE 3 OF 4
4PCS
4PCS
6PCS
14PCS
14PCS
2PCS
1PC
HARDWARE IDENTIFICATION

www.coastercompany.com
PAGE 4 OF 4
STEP 1 STEP 2
STEP 4
COMPLETE
STEP 3