Coaster 224283 User manual

224283
Dresser
PAGE 1 OF 3 COASTERFURNITURE.COM
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0 : 12/27/2021

PARTS IDENTIFICATION
COASTERFURNITURE.COM
PAGE 2 OF 3
ADRESSER 1PC
STEP 1
COMPLETE
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
10 MINUTES
ASSEMBLY TIME
ITEM:224283

ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
Injury may result from tipping furniture.
WARNING
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and damage.
This tip restraint must be attached to a wall
stud using long screw enclosed.
STEP 1
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
STEP 2
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
STEP 3
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the large hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed.
Confirm that the strap is securely laced and locked.
ITEM:224283
COASTERFURNITURE.COM
PAGE 3 OF 3

COASTERFURNITURE.COM
NOTE : DIMENSION TOLERANCE ±5%
INNER SIZE OF DRAWER A : 9.2" x 13.8" x 27.7"
INNER SIZE OF DRAWER B : 9.2" x 13.8" x 25"
30.6"
13"
17.1"
17.7"
29"
64"
ITEM:224283