Coaster 224285 User manual

224285
Chest
PAGE 1 OF 2 COASTERFURNITURE.COM
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0 : 12/27/2021

ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
Injury may result from tipping furniture.
WARNING
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and damage.
This tip restraint must be attached to a wall
stud using long screw enclosed.
STEP 1
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
STEP 2
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
STEP 3
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the large hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed.
Confirm that the strap is securely laced and locked.
ITEM: 224285
COASTERFURNITURE.COM
PAGE 2 OF 2

COASTERFURNITURE.COM
NOTE : DIMENSION TOLERANCE ±5%
INNER SIZE OF DRAWER A : 4" x 13.8" x 26"
INNER SIZE OF DRAWER B : 5.6" x 13.8" x 26"
INNER SIZE OF DRAWER C : 9.2" x 13.8" x 26"
31.3"
7.9"
11.8"
17.1"
34"
17.7"
50.6"
ITEM: 224285