Coaster 800429 User manual

800429
DESK
ASSEMBLY INSTRUCTION
COASTER FINE FURNITURE
www.coastercompany.com
Page 1 of 4 2/11/2015

ITEM:800429
A s s e m b l y I n s t r u c t i o n
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy
assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective.Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishment.
PARTS IDENTIFICATION :
A. LEFT SIDE FRAME
HARDWARE PACKAGE 1 :
B. MIDDLE SIDE FRAME
C. RIGHT SIDE FRAME
D. SQUARE TUBE(2 HOLES)
E. SQUARE TUBE(1 HOLE)
F. BOTTOM SHELF
www.coastercompany.com
1
2
3
4
8
Z DESCRIPTION FIGURE QTY
ALLEN BOLT - LARGE
ALLEN BOLT - SMALL
1 PC
2 PCS
6 PCS
SCREW
NUT
BOTTOM CAP
ASSEMBLY INSTRUCTION
G. SMALL TABLE TOP
1 PC
1 PC
1 PC
2 PCS
2 PCS
1 PC
Page 2 of 4
10 BOLT 2 PCS
9BALL 2 PCS
7TOP CAP
6LAMINATION
5HINGE 2 PCS
9 PCS
2 PCS
8 PCS
8 PCS
11 OPEN END WRENCH
ALLEN KEY
12
1 PC
1 PC
1 PC
H. BIG TABLE TOP
1 PC
I. DRAWER
2 PCS
J. LOCKING CASTER
3 PCS
K. CASTER
3 PCS

ASSEMBLY INSTRUCTION
ITEM:800429
www.coastercompany.com
Page 3 of 4
STEP 1 STEP 2
STEP 3 STEP 4
1
1
1
1
8
J
8
J
8
K
8
K
7
1
1
7
K8
8
J
1
4
1
4
B
C
E
E
A
D
D
3
3
3
3
3
3
3
3
3
G
H
5
5
6
B
A person assembles time for 30minutes.
Assemble the hinge (5) on the big table top (H)
and small table top (G) using screw (3).
First, insert the bottom caps (8) on the bottom
of those side frames (B) & (C). Second, insert
the caster (K) on the back of the side frames (B)
& (C) and insert the locking caster (J) on the
front of the side frames (B) & (C). Third,
assemble the square tubes (D) on the side frame
(B) & (C) using allen bolts-large (1).
First, insert the bottom caps (8) on the bottom
of the side frame (A) and insert the top caps
(7) on the top of the side frame (A). Second,
insert the caster (K) on the back of the side
frames (A) and insert the locking caster (J) on
the front of the side frames (A). Third, assemble
the side frame (A) using allen bolts-large (1).
Assemble the square tubes (E) on the side frame
(B) using allen bolts-large (1) and the nut (4).

ASSEMBLY INSTRUCTION
ITEM:800429
www.coastercompany.com
Page 4 of 4
STEP 5 STEP 6
FINISH FIGURE FINISH FIGURE
9
10
910
I
222
2
2
2
2
2
H
G
F
6
A
Assemble the ball (9) on the drawer (I) using
bolts (10).
First, assemble the bottom shelf (F) using allen
bolts-small (2). Second, the big table top (H) &
small table top (G) put on the frame using allen
bolts-small (2).