Coaster 2253K User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
2253K
F
uton
Bunk Bed
REVISION 0 : 05/30/2019
REVISION 1 : 10/21/2019
PAGE 1 OF 6
COASTERFURNITURE.COM
PAGE 1 OF 6
COASTERFURNITURE.COM

ITEM:2253K
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hard are from box and sort by size.
2. Please check to see that all hard are and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
ARIGHT
HEADBOARD 1PC F BED SUPPORT 2PC
BLEFT
HEADBOARD 1PC G SAFETY RAIL 2PC
C TOP BEDBASE 1PC H RIGHT JOINT 1PC
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
3. Please follo attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
45 MINUTES
DLOWER FRONT
BEDBASE 1PC I LEFT JOINT 1PC
ELOWER BACK
BEDBASE 1PC J HOOK 1PC
1BOLT
(1 4X10mm) 8PCS 7 NUT 5 16 12PCS
2BOLT
(5 16X32mm) 4PCS 8 PVC STICKER 4PCS
3BOLT
(5 16X45mm) 8PCS 9 ALLEN KEY 4mm 1PC
4BOLT
(5 16X53mm) 8PCS 10 ALLEN KEY 5mm 1PC
5WASHER
8.5mm
20PCS 11 WRENCH
13mm
1PC
6
SPRING
WASHER
8.5mm
12PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 2 OF 6
HARDWARE IDENTIFICATION

ITEM:2253K
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 3 OF 6

ITEM:2253K
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4 COMPLETE
COASTERFURNITURE.COM
PAGE 4 OF 6

ITEM:2253K
ASSEMBLY INSTRUCTIONS
COASTER CO. SANTA FE SPRINGS,CA.90670
INSTRUCTIONS FOR BUNK BED MODEL # 2253K
SIZE OF MATTRESS
The length and idth of the bunk mattress are as follo :
Length Width Thickness
Upper bunk 74" - 75" 37 1/2"- 38 1/2" 6" Maximum
Ensure thickness of mattress does not exceed 6” and there must be at least 5”
from mattress sleeping surface to top edge of guardrail.
SAFETY WARNING
1. Follo the information on the arnings appearing on the upper bunk end
structure and on the carton. Do not remove the arning label from bed.
2. Al ays use the recommended size mattress or mattress support or both to
help prevent the likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 in. (127 mm) belo the upper edge of
guardrails.
COASTERFURNITURE.COM
PAGE 5 OF 6
guardrails.
4. Do not allo children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on upper bunk.
6. Periodically check and ensure that the guardrail, ladder, and other components
are in their proper position, free from damage, and that all connectors are tight.
7. Do not allo horseplay on or under the bed and prohibit jumping on the bed.
8. Al ays use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for
replacement parts.
10. Use of a night light may provide added safety precaution for a child using
upper bunk.
11. Al ays use guardrails on both long sides of the upper bunk. If the bunk bed
ill be placed next to the all, the guardrail that runs the full length of the bed
should be placed against the all to prevent entrapment bet een the bed and
all.
12. The use of ater or sleep flotation mattress is prohibited.
13. Keep these instructions for future reference.
STRANGULATION HAZARD:
14. Never attach or hang items to any part of the bunk bed that are not designed
for use ith the bed for example, but not limited to hooks, belts, and jump ropes.
REPLACEMENT PARTS:
Replacement parts, including additional guardrails may be obtained from any

ITEM: 2253K
PRODUCT DIMENSION:
COASTERFURNITURE.COM
PAGE 6 OF 6