Coaster 193108B1 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
193108(B1&B2)
Counter Height Table
REVISION 0 : 03/22/2022 PAGE 1 OF 7 COASTERFURNITURE.COM

ITEM:
193108(B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
B1 (BOX 1)
B2 (BOX 2)
COASTERFURNITURE.COM
PAGE 2 OF 7
D DOOR WITH FRAME 2PCS
E BOTTOM PANEL 1PC
X KNOB WITH SCREW 4SETS
B LEG FRAME 2PCS
C SHELF 1PC
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
45 MINUTES
PARTS IDENTIFICATION
A TOP 1PC

ITEM:
193108(B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 193108 (B1)
1ALLEN WRENCH
(M4 - BLK) 1PC
2SHORT BOLT
(M6 x 40mm - BLK) 12PCS
3LONG BOLT
(M6 x 50mm - BLK) 8PCS
4LOCK WASHER
(M6 -BLK) 20PCS
5BIG FLAT WASHER
(M6 x 19mm- BLK) 8PCS
6SMALL FLAT WASHER
(M6 x 13mm -BLK) 6PCS
7PLASTIC DOWEL
(M8 x 30mm - BLK) 16PCS
8FLAT HEAD SCREW
(M4 x 38mm- RBW) 4PCS
9CAM BOLT
(34MM - SR) 8PCS
10 CAM NUT
(15/15+16 Z1 BRIGH - SR) 8PCS
11 LEVELER
(23mm - BLK) 4PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PAGE 3 OF 7
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.

ITEM:
193108(B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 3
COASTERFURNITURE.COM
PAGE 4 OF 7

ITEM:
193108(B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 4
STEP 5
COASTERFURNITURE.COM
PAGE 5 OF 7

ITEM:
193108(B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 6
STEP 7
COASTERFURNITURE.COM
PAGE 6 OF 7

ITEM:
193108(B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 8
STEP 9
STEP 10
COMPLETE
COASTERFURNITURE.COM
PAGE 7 OF 7

ITEM:
193108(B1&B2)
COASTERFURNITURE.COM
Note: Dimension tolerance ±5%
77.75"
19.50"
34.50"
38.50"
18.00"
22.00"
30.00" 17.75" 30.00"
32.00"
12.75"
6.75"
36.00"
12.50"
42.00"