Coaster 5423 User manual

5423
3 PCS NESTED TABLE SET
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
PAGE 1 OF 3
www.coastercompany.com
REVISION 0: 12/10/2005
REVISION 1: 03/15/2012
REVISION 0: 12/10/2005

ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION HARDWARE IDENTIFICATION
( LARGE TABLE )
A 1
B 2
C
3
ITEM :
5423
LARGE LEG
FRAME
LARGE
2PCS
LARGE TABLE
TOP 1PC ALLEN WRENCH 1PC
BOLT 6PCS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
!Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishment
C
3
( MEDIUM TABLE )
D
E
F
( SMALL TABLE )
G
H
I
www.coastercompany.com
MEDIUM
TABLE TOP 1PC
LARGE
TRESTLE BAR 1PC
MEDIUM LEG
FRAME 2PCS
SMALL
TRESTLE BAR 1PC
SCREW 30PCS
MEDIUM
TRESTLE BAR 1PC
SMALL TABLE
TOP 1PC
SMALL LEG
FRAME 2PCS
www.coastercompany.com
PAGE 2 OF 3

ASSEMBLY INSTRUCTIONS
LARGE TABLE
STEP 1
STEP 2
Place table top upside down on soft surface, then align
Flip the table over
and fasten all legs to table top using screw and tighten
with screw driver (Not provided). Insert trestle bar
into place, then fasten to leg using bolt and tighten with
Allen wrench.
MEDIUM TABLE
STEP 1
STEP 2
Place table top upside down on soft surface, then align
Flip the table over
and fasten all legs to table top using screw and tighten
with screw driver (Not provided). Insert trestle bar
into place, then fasten to leg using bolt and tighten with
Allen wrench.
ITEM :
5423
SMALL TABLE
STEP 1 STEP 2
Place table top upside down on soft surface, then align
Flip the table over
and fasten all legs to table top using screw and tighten
with screw driver (Not provided). Insert trestle bar
into place, then fasten to leg using bolt and tighten with
Allen wrench.
www.coastercompany.com
www.coastercompany.com
PAGE 3 OF 3