Coaster 5908 User manual

5908
CONSOLE TABLE
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
REVISION 0 : 05/11/2004
REVISION 1 : 09/26/2011
PAGE 1 OF 3
www.coastercompany.com
REVISION 1 : 09/26/2011
REVISION 2 : 12/16/2011

ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION HARDWARE IDENTIFICATION
A 1
B 2
C
3
LONG BOLT 4PCS
4PCS
ALLEN WRENCH 1PC
WOOD PLUG
LEG FRAME 2PCS
ITEM :
5908
SHELF 2SETS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
!
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishment
C
3
4
D
5
6
7
8
www.coastercompany.com
8PCS
LOCK WASHER 8PCS
4PCS
8PCS
SCREW
TOP PANEL 1PC
WOOD PLUG
SHORT BOLT
FLAT WASHER
BARREL NUT
6PCS
APRON 2PCS
4PCS
www.coastercompany.com
PAGE 2 OF 3

ASSEMBLY INSTRUCTIONS
STEP 1
Align and hand tighten leg frame to shelf using short bolt, lock washer and flat washer. Align and hand tighten
apron to leg frames using long bolt and barrel nut. Tighten all bolts with Allen wrench. Insert wood plug to
cover the hole in leg.
STEP 2
Place top panel upside down on soft surface. Align and fasten top panel to apron using screw and tighten with
screw driver ( Not Included ).
ITEM :
5908
STEP 3
Flip table over using two people to lift and flip this table.
www.coastercompany.com
www.coastercompany.com
PAGE 3 OF 3