Cochlear Nucleus CP802 User manual

Nucleus®CP802 Sound Processor
User Guide
N369403_334059_ISS2-02_CP802UG_NU.indd 1N369403_334059_ISS2-02_CP802UG_NU.indd 1 28/05/2012 11:59:48 AM28/05/2012 11:59:48 AM

N369403_334059_ISS2-02_CP802UG_NU.indd 2N369403_334059_ISS2-02_CP802UG_NU.indd 2 28/05/2012 12:00:03 PM28/05/2012 12:00:03 PM

Contents
Getting started..................................................................................................5
CochlearNucleus CP802 Sound Processor ...........................................5
Using the processor..........................................................................................6
Turn the processor on or off.....................................................................6
Lock or unlock the processor buttons....................................................6
Change the program.................................................................................. 7
Wearing the processor.....................................................................................8
Wear the processor on the ear ................................................................8
Attach the processing unit and battery module............................8
Lock the battery module onto the processing unit .......................9
Wear the processor on the body.............................................................9
Attach the processing unit and battery pack................................10
Place the processor on the ear................................................................11
Wear the Mic Lock with the processor................................................. 12
Use the Microphone Cover Sleeve........................................................ 15
Charging the processor...................................................................................17
Recharge the Standard Rechargeable Battery Module ......................17
Recharge rechargeable Battery Pack batteries ...................................18
Change Standard Battery Module batteries........................................19
Change Battery Pack batteries...............................................................20
Caring for the processor................................................................................ 21
Changing processor parts .............................................................................23
Change the earhook.................................................................................23
Change the coil cable ..............................................................................23
Change the coil magnet..........................................................................24
Change the microphone cover...............................................................25
Checking and troubleshooting the processor...........................................26
Use monitor earphones to check the sound.......................................26
Use the coil wand to check the coil......................................................26
Troubleshoot .............................................................................................27
N369403_334059_ISS2-02_CP802UG_NU.indd 3N369403_334059_ISS2-02_CP802UG_NU.indd 3 28/05/2012 12:00:03 PM28/05/2012 12:00:03 PM

Indicator lights ......................................................................................... 30
Private tones..............................................................................................31
Cochlear battery charger lights ............................................................. 31
Using the telephone with the processor....................................................32
Using advanced mode ...................................................................................33
General warnings and cautions ...................................................................34
Processor and parts..................................................................................34
Batteries .....................................................................................................35
Other information..........................................................................................36
Technical specifications...........................................................................36
Physical configuration........................................................................36
Materials...............................................................................................37
Product component dimensions ....................................................37
Weight ..................................................................................................37
Operating characteristics..................................................................37
Environmental conditions................................................................ 38
IP rating of processor.........................................................................39
Equipment classification .........................................................................39
FCC (Federal Communications Commission) compliance .............. 40
Labelling symbols..................................................................................... 41
Legal statement ........................................................................................42
N369403_334059_ISS2-02_CP802UG_NU.indd 4N369403_334059_ISS2-02_CP802UG_NU.indd 4 28/05/2012 12:00:03 PM28/05/2012 12:00:03 PM

Getting started
CochlearNucleus CP802 Sound Processor
The Cochlear™Nucleus®CP802 Sound Processor is used together with
a CochlearNucleus cochlear implant to transfer sound to the ear. The
processor consists of a processing unit, earhook, coil, coil cable and a
CP802 Standard or Standard Rechargeable Battery Module, or a CP802
Battery Pack and Battery Pack Cable.
Coil cable
Coil
Standard
rechargeable
battery module
Earhook
Upper button
Accessory
socket
Cochlear
Processing unit
Battery pack cable
Battery pack
Battery pack clip
Coil magnet
Processing unit
Microphone cover
Lower button
© Cochlear Limited 2012 CP802 Sound Processor User Guide - 5
N369403_334059_ISS2-02_CP802UG_NU.indd 5N369403_334059_ISS2-02_CP802UG_NU.indd 5 28/05/2012 12:00:03 PM28/05/2012 12:00:03 PM

Using the processor
Turn the processor on or off
To turn the processor on or off, press the lower button for two seconds.
Lock or unlock the processor buttons
To lock or unlock the processor buttons, quick press both buttons
together.
Tip: Lock the processor buttons to prevent children from changing the processor
settings, or to avoid accidental button presses changing the settings.
6 - CP802 Sound Processor User Guide © Cochlear Limited 2012
N369403_334059_ISS2-02_CP802UG_NU.indd 6N369403_334059_ISS2-02_CP802UG_NU.indd 6 28/05/2012 12:00:04 PM28/05/2012 12:00:04 PM

Change the program
To increase loudness, you can change the program by pressing the lower
button.
Your clinician needs to enable this feature.
© Cochlear Limited 2012 CP802 Sound Processor User Guide - 7
N369403_334059_ISS2-02_CP802UG_NU.indd 7N369403_334059_ISS2-02_CP802UG_NU.indd 7 28/05/2012 12:00:09 PM28/05/2012 12:00:09 PM

Wearing the processor
Wear the processor on the ear
To perform the tasks described in this section, you need the following:
Attach the processing unit and battery module
1. Hold the battery module
and processing unit at an
angle so they touch.
2. Twist the battery module
and processing unit together
as shown to attach the two
parts.
Battery cover
locking tool
Processing unit Standard or standard rechargeable
battery module
8 - CP802 Sound Processor User Guide © Cochlear Limited 2012
N369403_334059_ISS2-02_CP802UG_NU.indd 8N369403_334059_ISS2-02_CP802UG_NU.indd 8 28/05/2012 12:00:09 PM28/05/2012 12:00:09 PM

Lock the battery module onto the processing unit
1. Lift the accessory socket
cover of the processing unit. 2. Push the lock to the far left position, using the Cochlear™
Nucleus®Battery Cover
Locking Tool.
Wear the processor on the body
To perform the tasks described in this section, you need the following:
Battery pack cable Battery pack
Battery pack clip
Processing unit
© Cochlear Limited 2012 CP802 Sound Processor User Guide - 9
N369403_334059_ISS2-02_CP802UG_NU.indd 9N369403_334059_ISS2-02_CP802UG_NU.indd 9 28/05/2012 12:00:13 PM28/05/2012 12:00:13 PM

Attach the processing unit and battery pack
1. Hold the processing unit
and the upper end of the
battery pack cable at an
angle and twist together
as shown.
2. Line up the Cochlear logo and
dot marks on the lower end of
the battery pack cable and on
the battery pack.
3. Connect the plug on the
battery pack cable to the
socket on the battery pack.
Tip: You can lock the battery pack cable by pushing the lock below the accessory
socket to the far left position. To unlock, push the lock to the far right position.
4. Insert the battery pack into
the Cochlear™Nucleus®
CP802 Battery Pack Clip, at
an angle.
5. Line up the hinge on the
battery pack with the slot
on the clip and twist gently
until the clip clicks into
place.
6. Clip the battery pack to your
clothes.
10 - CP802 Sound Processor User Guide © Cochlear Limited 2012
N369403_334059_ISS2-02_CP802UG_NU.indd 10N369403_334059_ISS2-02_CP802UG_NU.indd 10 28/05/2012 12:00:15 PM28/05/2012 12:00:15 PM

To remove the battery pack cable:
1. Twist the processing unit and the upper end of the battery pack
cable together to separate the two parts.
2. Pull the lower end of the battery pack cable away from the battery
pack.
To remove the battery pack from the battery pack clip, twist and pull
the battery pack away from the battery pack clip.
Place the processor on the ear
1. Place the processor on the
ear as shown. 2. Place the coil on the head over the implant. The coil
magnet will hold the coil in
place over the implant.
© Cochlear Limited 2012 CP802 Sound Processor User Guide - 11
N369403_334059_ISS2-02_CP802UG_NU.indd 11N369403_334059_ISS2-02_CP802UG_NU.indd 11 28/05/2012 12:00:17 PM28/05/2012 12:00:17 PM

Wear the Mic Lock with the processor
To perform the tasks described in this section, you need the following:
The Cochlear™Nucleus®Mic Lock™or the Cochlear Nucleus Mic Lock -
Stirrup helps hold the processing unit in place behind the ear.
You can use the Mic Lock with the battery module. To wear the Mic
Lock:
1. Insert the processor through
the Mic Lock band. 2. Place the processor on the ear.
3. Bring the tubing around
to the front and up to the
earhook.
Processing unit Mic Lock Mic Lock - Stirrup
Battery module Battery pack cable
or
or
12 - CP802 Sound Processor User Guide © Cochlear Limited 2012
N369403_334059_ISS2-02_CP802UG_NU.indd 12N369403_334059_ISS2-02_CP802UG_NU.indd 12 28/05/2012 12:00:18 PM28/05/2012 12:00:18 PM

4. Cut the tubing up to the
notch on the earhook,
making sure you do not cut
it too short.
5. Attach the tubing to the
earhook by pushing the
tubing up to the notch on
the earhook.
To remove the Mic Lock, ease the tubing off the earhook and slide the
Mic Lock band away from the processor.
You can use the Mic Lock - Stirrup with the battery pack. To wear the
Mic Lock - Stirrup:
1. Clip the Mic Lock - Stirrup
into the two holes at the
upper end of the battery
pack cable.
2. Place the processor on your
ear.
3. Bring the tubing around
to the front and up to the
earhook.
© Cochlear Limited 2012 CP802 Sound Processor User Guide - 13
N369403_334059_ISS2-02_CP802UG_NU.indd 13N369403_334059_ISS2-02_CP802UG_NU.indd 13 28/05/2012 12:00:20 PM28/05/2012 12:00:20 PM

4. Cut the tubing up to the
notch on the earhook,
making sure you do not cut
it too short.
5. Attach the Mic Lock - Stirrup
to the earhook by pushing
the tubing up to the notch
on the earhook.
To remove the Mic Lock - Stirrup, pull it out of the holes on the battery
pack cable and ease the tubing off the earhook.
14 - CP802 Sound Processor User Guide © Cochlear Limited 2012
N369403_334059_ISS2-02_CP802UG_NU.indd 14N369403_334059_ISS2-02_CP802UG_NU.indd 14 28/05/2012 12:00:22 PM28/05/2012 12:00:22 PM

Use the Microphone Cover Sleeve
To perform the tasks described in this section, you need the following:
The Cochlear™Nucleus®Microphone Cover Sleeve helps prevent children
removing the microphone cover from the processing unit. To attach the
microphone cover sleeve to the processing unit:
1. Attach the battery module
to the processing unit.
2. Lock the battery module
onto the processing unit.
3. Insert the processing unit
into the microphone cover
sleeve as shown.
4. Make sure the openings on
the sleeve are aligned over
the microphone ports.
5. Attach the coil and coil
cable to the processing unit.
Note:
The microphone cover sleeve is recommended for use by children
under the age of 3 years.
Processing unit Battery module Coil and coil cable Microphone cover
sleeve
© Cochlear Limited 2012 CP802 Sound Processor User Guide - 15
N369403_334059_ISS2-02_CP802UG_NU.indd 15N369403_334059_ISS2-02_CP802UG_NU.indd 15 28/05/2012 12:00:22 PM28/05/2012 12:00:22 PM

To remove the microphone cover sleeve:
1. Remove the coil and coil
cable from the processing
unit.
2. Slide the microphone cover
sleeve off the processing
unit.
Make sure that you remove the microphone cover sleeve before using
the monitor earphones to check the sound.
Care for the microphone cover sleeve:
• Regularly check the state of the microphone cover sleeve.
• Change the microphone cover sleeve if it does not fit properly, or if
you notice any tearing.
16 - CP802 Sound Processor User Guide © Cochlear Limited 2012
N369403_334059_ISS2-02_CP802UG_NU.indd 16N369403_334059_ISS2-02_CP802UG_NU.indd 16 28/05/2012 12:00:25 PM28/05/2012 12:00:25 PM

Charging the processor
Recharge the Standard Rechargeable Battery
Module
1. To unlock the battery
module, push the lock to the
far right position using the
battery cover locking tool.
2. To remove the battery
module from the processing
unit, twist the two parts as
shown.
3. Place the battery module
on the Cochlear™Nucleus®
Battery Charger at an angle.
4. Twist clockwise to connect
the battery to the battery
charger.
© Cochlear Limited 2012 CP802 Sound Processor User Guide - 17
N369403_334059_ISS2-02_CP802UG_NU.indd 17N369403_334059_ISS2-02_CP802UG_NU.indd 17 28/05/2012 12:00:26 PM28/05/2012 12:00:26 PM

5. Connect the battery charger
to the Cochlear™Nucleus®
Global Power Adaptor.
6. Plug the power adaptor into
mains power and turn it on.
When the battery charger light goes green, the battery module is fully
charged.
Recharge rechargeable Battery Pack batteries
Use the AAA battery charger (e.g. PowerBase®Battery Charger) supplied
to charge AAA batteries. For information on how to use the charger, see
the instructions supplied with it.
PowerBase ®
18 - CP802 Sound Processor User Guide © Cochlear Limited 2012
N369403_334059_ISS2-02_CP802UG_NU.indd 18N369403_334059_ISS2-02_CP802UG_NU.indd 18 28/05/2012 12:00:28 PM28/05/2012 12:00:28 PM

Change Standard Battery Module batteries
1. To unlock the battery cover,
turn the lock counter-
clockwise using the battery
cover locking tool.
2. Remove the battery cover.
3. Remove the batteries from
the battery holder. 4. Insert the new batteries with the flat side facing up.
5. Replace the battery cover. 6. Lock the battery cover by
turning the lock clockwise.
Do not overturn the lock as
it could damage the lock.
© Cochlear Limited 2012 CP802 Sound Processor User Guide - 19
N369403_334059_ISS2-02_CP802UG_NU.indd 19N369403_334059_ISS2-02_CP802UG_NU.indd 19 28/05/2012 12:00:29 PM28/05/2012 12:00:29 PM

Change Battery Pack batteries
1. Lift the lever on the battery
pack upwards. 2. Open the battery compartment by pulling the
cover upwards.
3. Remove the batteries from
the battery compartment. 4. Line up the '+' and '-' marks on the batteries with the '+'
and '-' marks on the battery
pack.
5. Insert the batteries into the
battery pack.
6. Push the cover down
to close the battery
compartment.
7. Push the lever back until it
clicks into place.
20 - CP802 Sound Processor User Guide © Cochlear Limited 2012
N369403_334059_ISS2-02_CP802UG_NU.indd 20N369403_334059_ISS2-02_CP802UG_NU.indd 20 28/05/2012 12:00:31 PM28/05/2012 12:00:31 PM