Cochlear Aqua+ for Kanso 2 User manual

Aqua+forKanso®2
SoundProcessor
User Guide
CP1150

Contents
Aqua+ for Kanso® 2 Sound Processor
User Guide
2
Brugervejledning til Aqua+ til Kanso® 2
lydprocessor
19
Kanso® 2 -puheprosessorin Aqua+-
vesisuojan käyttäjän opas
36
Brukerveiledning for Aqua+ Kanso®
2-lydprosessor
53
Bruksanvisning till Aqua+ för Kanso®
2-ljudprocessor
70
„Aqua+ for Kanso® 2“ garso procesoriaus
naudotojo vadovas
87
Aqua+ Kanso ® 2 palīgierīces skaņas
procesora lietotāja rokasgrāmata
104
Heliprotsessori Kanso® 2 tarviku Aqua+
kasutusjuhend
121

2AQUA+ FOR KANSO 2 USER GUIDE
Contents
About this guide ������������������������������������������������������������������3
Aqua+ for Kanso® 2 description���������������������������������������4
Aqua+ for Kanso 2 instructions�����������������������������������������5
Safety Line instructions����������������������������������������������������10
Care and storage����������������������������������������������������������������12
Cautions ������������������������������������������������������������������������������13
Warnings �����������������������������������������������������������������������������14
Other information�������������������������������������������������������������15
Labelling symbols ��������������������������������������������������������������16
Serious incidents����������������������������������������������������������������18

3AQUA+ FOR KANSO 2 USER GUIDE
About this guide
The Cochlear™Aqua+ for Kanso® 2 is a re-usable sealable
cover that keeps your Cochlear Kanso 2 Sound Processor
(model number: CP1150) dry when used in or around water
(e�g� when swimming or in the bath)� It is worn on your
implant with your sound processor sealed inside�
This Aqua+ is intended for use by people who use the Kanso 2
Sound Processor� It should only be used by people who can
either remove the sound processor themselves if it’s causing
discomfort or who can indicate any discomfort to their parent
or caregiver�
The Nucleus®Safety Line is a retention option to help
prevent accidental loss of your Aqua+ by securing it to your
clothing with a snap-lock clip�
While using Aqua+ you can also use the following, providing
they are protected from water and kept dry:
• your smartphone (with the Cochlear Nucleus Smart App)
• Cochlear CR310 Remote Control
• Cochlear wireless accessories�
Testing shows Aqua+ can be:
• used at depths of up to 3 metres for up to 2 hours�
• re-used up to 50 times, but this may vary according to
how you use it�
There have been no reported undesirable side effects from
using Aqua+�

4AQUA+ FOR KANSO 2 USER GUIDE
Cover top
(soft)
Aqua+ for Kanso® 2 description
Retention aid
holders
Aqua+ for
Kanso 2
Nucleus Safety Line
(optional)
Cover tab
Lock
Aqua+ cover
Aqua+ base
Lock

5AQUA+ FOR KANSO 2 USER GUIDE
Aqua+ for Kanso 2 instructions
1� If you use a Kanso 2 Safety
Line, remove it from your
sound processor�
Place your thumbnail
in the slot at the base
and lift�
2� Remove the Aqua+ cover�
Put your thumb under
the cover tab and push
upwards�
CAUTION
Don’t damage the cover with
your fingernails�
3� Check both halves for damage (e�g� scratches, tears) or
contamination (e�g� hair, sunscreen)� If it is damaged,
use a new Aqua+�
CAUTION
Anything that affects the seal may cause water to leak in and
damage your sound processor�

6AQUA+ FOR KANSO 2 USER GUIDE
4� Place your sound processor
in the Aqua+ base with the
Cochlear logo, light and
microphones facing up�
TIPS
• Your Aqua+ is shaped so your processor only fits one way�
• If you use a Cochlear SoftWear™ pad, you can leave it on the
processor�
5� Align the lock on the cover
and base and fit them
together�
After the lock parts are
fitted, lower the other end
of the cover onto the base�
TIP
Make sure you don’t trap too
much air in the cover� This
could affect sound quality and
comfort�

7AQUA+ FOR KANSO 2 USER GUIDE
6� Press firmly around the
edges until the base is flush
with the cover�
CAUTION
Make sure your Aqua+ is
properly sealed, so water
doesn’t leak in and damage
your processor�
7� If you’re worried about
losing Aqua+, use a
Nucleus Safety Line to
attach it to your clothing�
See Safety Line instructions
on page 10�

8AQUA+ FOR KANSO 2 USER GUIDE
8� Place the Aqua+ on your
implant as normal, making
sure the Cochlear logo,
light and microphone ports
are facing up�
9� To keep Aqua+ on your
implant, use a retention
aid such as goggles�
NOTE
Make sure your sound
processor is still in the correct
position on your implant�