Combi Mamalon User manual

•For safety of the baby, please read this user guide carefully
before use and use the product accordingly.
•Store this user guide in the pocket underneath the main body.
•Please contact the local distributor if you have any
questions about the installation and found any problem
about usage.
•Keep this user guide always together with the child car
seat.
This product is tested and certified
according to ECE R44/04.
- Universal : G0, G1, G2
- Applicable weight : up to 25kg
User Guide
Child Car Seat
DANGER
Please install the child car seat in backward facing mode for baby weighing below
9kg. It is very dangerous to use forward facing mode under this condition.
CAUTION
No continuous use for a long period, suggests to take a rest in every hour use of
considering the child may exhaust. Also, always pay attention to child's physique
change until child can control his/her neck of head movement.

2a 2b 2c 2d 2e
2f 2g 2h 2i 2j
1
2
1a 1c1b
less than 32cm
less than 40cm

3
4
3a 3b 3c
4a
4b 4d
4c 4e
4f
4g
3g
3h
3i 3j 3l 3m 3n 3o 3k
3d 3e
3f

5
7
6
5a
5b
5d
5e
5f
5g
5c

1 ●
9 ●
2 ●
3 ●
4 ●
● 6
● 7
● 8
5 ●
Name of parts
10a
10b
10c
10d
8
Vehicle headrest

● 10
● 11
● 12
● 13
● 14
15 ●
16 ●
● 18
● 19
● 20
● 21
● 17

List of components
Contents of the labelsLabels
The caution items mentioned in this user guide are for your
reference in order to use this product safely. [danger],
[warning] and [caution] indicate the potential consequences
if the mentioned are not followed properly and are
categorized according to the level of severity.
Thank you for purchasing our child car seat. Before
use, please read the user guide carefully and pay
utmost care when using the product.
This child car seat does not guarantee protection from
injury in all situations, however, using it appropriately
can reduce injury and prevent death.
Never leave the child unattended: it may be
dangerous. Your child's safety is your responsibility.
Before use
1. Crotch belt cover
2. Buckle button
3. Buckle
4. Color indicator
5. Crotch belt
6. Insert tongue
7. Adjustment button
8. Adjustment belt
9. Shoulder belt insert outlet
10. Seat cover
11. Guide clip
12. Seat belt guide
13. Shoulder belt cover
14. Baby belt
15. Lot No sticker
16. Baby belt storage cover
17. Baby belt adjustment metal
18. Instruction manual slot holder
19. Locking device (red color)
20. Seat belt guide
21. Seat belt guide
Improper operation will directly
result to death or severe injury.
Improper operation may cause
death or severe injury.
Improper operation may cause
injury or damage to the product.
It is the recommendations
about usage of child car seat
and useful hints.
DANGER
WARNING
CAUTION
HINT

Instructions and Guidelines
●Backward facing against
driving direction.
●Weight under 7 kg, the inner
cushion is required to use.
●Make sure to use 5-point seat
belt of the child car seat.
● Height reference：~75cm
● Age reference : newborn to one
year old
● Newborns are referred to newly
born infants weighing above 2.5kg
and carried for above 37 weeks in
pregnancy.
●Make sure to use 5-point seat
belt of the child car seat.
● Using the inner cushion is
prohibited.
●Forward facing against
driving direction.
●Height reference：Around
75~105cm
●Age reference : 1~4 years old
●Forward facing against
driving direction.
● Using the inner cushion is
prohibited.
● Using the vehicle seat belt,
but not using the 5-point
seat belt of child car seat.
● Height reference：Around
95~120cm
●Age reference : 3~7 years old
DANGER : ● Please note that the applicable height and age stated above are for
reference only. Please refer to the weight conditions in order to choose the
appropriate mode to use with.
● Do not use in forward facing position until baby weight is over 9kg.
This part describes how to determine the installation direction, explains how to use inner cushion. Use properly
according to the baby body weight.
For Baby weighing under 10kg
Group 0 （Pict 1a）
For Baby weighs from 9kg - 18kg
Group I （Pict 1b）
Baby weighing from 15kg - 25kg
Group II （Pict 1c）

Child car seat may apply by different types of seat belt, it may vary by different installation methods
or cannot be installed. This product is only applicable to a vehicle equipped with 3-point seat belt
requirement of GB14166 or ECE R16 approved. Make sure the fixing points of vehicle seat belts
comply with GB requirement.
Types of seat belt and important notes for installation
• Please install on the vehicle seat with 3-point seat belt.
• Please do not use the seat with 2-point seat belt.
• Please ensure that the vehicle type is appropriate to use and it works well with this
child car seat according to the vehicle user's manual.
Types of
Seat belt
Characteristics
(distinction method)
Extendable normally but locked
in sudden retraction
After the seat belt is pulled out
completely, it will lock the belt
during winding back. Seat belt
cannot be elongated anymore.
(It will be unlocked after it is
completely winded back.)
Caution of backward
facing mode
Slowly pull out the seat belt and
fix the child car seat properly.
It is dangerous to completely pull
out the seat belt. Please wind
back the seat belt and unlock the
car seat lock function for installing
the car seat.
Caution of forward
facing mode
Slowly pull out the seat belt and
using locking device to fix the
child car seat
Using locking device to fix the
belt for installation first. After
finish the installation, then pull
out all the seat belt and then
release it.
This product must not be modified in any ways. Do not use the child car seat when
it is not equipped with the instructions manual, or any components are missing.
WARNING
DANGER

Do not install this child car seat in case of the
following conditions.
●Please do not install this product on unsuitable
vehicle seat even though it has not been
mentioned below.
● Vehicle seat without seat belt. (Figure 2a)
● Vehicle seat with 2-point seat belt. (Figure 2b)
● Vehicle seat depth less than 40cm. (Figure 2c)
●Bucket type vehicle seat with hollow seat
surface. (Figure 2d)
● Vehicle seat facing sideway or backward side
against the driving direction. (Figure 2e)
● Vehicle seat with extra large headrest.
Due to the shape of headrest, the headrest
adjustment of the child car seat cannot be
operated. (Figure 2f)
※ On vehicle seat of which the headrest is
removable, the child car seat can be used if the
car seat is installable after removing the vehicle
seat headrest.
●The vehicle seat is equipped with automatic
seat belt device.
Automatic seat belt is an automatic device of
fastening seat belt after sitting in vehicle seat
and vehicle door be closed.
● Vehicle seat equipped with an air bag. (Figure
2g, Figure 2h)
※ Vehicle seat with only side air bag is acceptable.
● Vehicle seat with seat belt extending from the
center part. (Figure 2i)
※ Seat belt is extending from the middle of the
vehicle seat where is located in the front of seat
belt guide.
● Vehicle seat with a mounted middle portion
which cannot secure the child car seat.
●The installation length of seat belt less than
32cm. (Figure 2j)
※ The length between the extension point and the
buckle of the seat belt.
● Vehicle seat with extremely short seat belt.
Do not install this child car seat in case of the
following conditions.
●Please do not install this product on unsuitable
vehicle seat even though it has not been
mentioned below.
● Vehicle seat without seat belt. (Figure 2a)
● Vehicle seat with 2-point seat belt. (Figure 2b)
● Vehicle seat depth less than 40cm. (Figure 2c)
●Bucket type vehicle seat with hollow seat
surface. (Figure 2d)
● Vehicle seat facing sideway or backward side
against the driving direction. (Figure 2e)
● Vehicle seat with extra large headrest.
Due to the shape of headrest, the headrest
adjustment of the child car seat cannot be
operated. (Figure 2f)
※ On vehicle seat of which the headrest is
removable, the child car seat can be used if the
car seat is installable after removing the vehicle
seat headrest.
●The vehicle seat is equipped with automatic
seat belt device.
Automatic seat belt is an automatic device of
fastening seat belt after sitting in vehicle seat
and vehicle door be closed.
● Vehicle seat equipped with an air bag. (Figure
2g, Figure 2h)
※ Vehicle seat with only side air bag is acceptable.
● Vehicle seat with seat belt extending from the
center part. (Figure 2i)
※ Seat belt is extending from the middle of the
vehicle seat where is located in the front of seat
belt guide.
● Vehicle seat with a mounted middle portion
which cannot secure the child car seat.
●The installation length of seat belt less than
32cm. (Figure 2j)
※ The length between the extension point and the
buckle of the seat belt.
● Vehicle seat with extremely short seat belt.
Inapplicable vehicle seats
Child car seat can be installed:

DANGER
● Do not seat a child who does not satisfy the applicable
conditions, or install the child car seat onto a vehicle
seat which is inapplicable.
●Please install correctly according to user guide or
indication stickers on the product.
(Figure 3a)
●Never use the child car seat as stated in the user guide
if it cannot be fixed. Please install the child car seat to
the other vehicle seats.
(Figure 3b)
●Always fix the child car seat with the seat belt when
installing to the vehicle. Never use with a rope, string or
other than seat belt tofix it.
(Figure 3c) (Figure 3d)
●Do not allow child to stand on the child car seat.
Please make sure crotch belt cover and the baby belt
are properly installed. The baby belt is well fastened to
the buckle and color indicator is shown in green.
●Do not install the child car seat onto the vehicle seat
equipped with an air bag. In case of collision, the
exploded air bag will expose the child to major impact
which is extremely dangerous. Vehicle seat with only
side air ba
g is acceptable. (Figure 3e)
In case of emergency
● In case of emergency, such as accidents, press the button
to release the baby belt from the buckle, and remove the
child from the vehicle seat immediately. (Figure 3f)
WARNING
● Always keeps the seat belt fitting tight. Any looseness may
get caught around the child's neck and may become the
cause of suffocation. Please adjust the baby belt to suitable
length. (Figure 3g)
● Please store the adjustment belt in the adjustment belt slot
or the belt may strangle and suffocate the child.
● Always use the inner cushion in backward facing mode
position for child who weigh under 7 kg. (Figure 3h)
● Do not install on a vehicle seat of where the seat belt is
damaged. (Figure 3i)
● Do not carry the child car seat when the child seating in.
● Structural damage may happen to the product when it is
knocked or made to fall from high level. In such case stop
using it even if the knock is one-off and no physical
damage. (Figure 3j)
● Contactlocal distributor in case the belt buckle is jammed
with dust or food crumbs and does not function well.
(Figure 3k)
● Do not use the baby belt if any damage is found. Please
contact local distributor and retailer for any enquires.
(Figure 3l)
● Never use this child car seat fitted into vehicle seats facing
sideways of facing rearwards. Please install the child car
seat on the rear seat since it may obstruct the driver's view
to the side mirror.
Instructions

• The buckle button may be pressed and released
accidentally by the child. It is important periodically
to check the baby belt is well fastened. (Figure 3m)
• Always fix the child car seat securely with the vehicle
seat belt although the child is not seated. (Figure 3n)
• Always use the shoulder belt guide if using a junior
car seat mode and a booster car seat mode. In case
of accident the loosen seat belt from shoulder is very
dangerous.
• 5-point seat belt device is designed for a smaller size
child to use. If child's physique is applicable to junior
seat mode, do not use the 5-point seat belt on the
seat.
• Do not install on the front seat of a 2-door or 3-door
vehicle in case it may obstruct passengers from
getting out the vehicle in emergency.
• Do not leave the child in the vehicle unattended. In
hot days the cabin temperature may rise and
endanger the child to heat stroke or dehydration,
it may also become the cause of accident.
(Figure 3o)
• To cover up the child's shoulder by adjusting the
shoulder belt guide.
Instructions
The stress points indication：
Do not use any
point other than the
stress points
indicated on an
instruction manual.
DANGER

●Prolonged exposure of the child car seat to
direct sunlight may cause the insert tongue or
other parts of the child car seat to get excessive
heat. Always touch and check all parts before
seating the child. Failure to do so may cause
burns. Please park the car into the shade area or
cover up the child car seat while in the sunny day
or summer time.
● Do not adjust or operate the child car seat while
driving. Make sure while driving that the child do
not play with the child car seat.
●Do not use the child car seat as a normal chair,
it may tip over or fall off. Never use the child car
seat for a purpose other than the application
mentioned in the user guide. This child car seat
is designed to use in the car only. (Figure 4a)
●Make sure the child car seat is not jammed in
between the vehicle doors or other movable
parts. (Figure 4b)
●Pay particular attention when fastening or
adjusting the harness in case you have long
finger nails or have applied artificial nails. Nails
may accidentally get jammed inside the gaps
when operating the child car seat. (Figure 4c)
● Depending on the shape and materials of the
vehicle seat, the child car seat may cause
wrinkle or scratch onto the vehicle seat.
●Avoid the child car seat exposing to direct
sunlight, upper leather may get excessive heat
to cause child burn.
●Do not modify the child car seat or handle it in
the ways not stated in this user guide. (Figure
4d)
●Do not apply unauthorized parts or parts not
included in sales package. Improper usage of
parts may damage the product or cause
accidents.
●Do not put a piece of cushion etc. on or in
between the vehicle seat and the child car seat.
(Figure 4e)
●Do not expose the child car seat to windy or
rainy environment.
●Seat cover must be attached when using. Do not
replace any parts of child car seat by other
things (which may affect proper functions).
(Figure 4f)
●Do not leave things unsecured in the vehicle.
Things may fall off onto the child when the
vehicle is in motion. (Figure 4g)
●Do not use the child car seat without seat cover,
seat cover is a structure part as an overall
performance for child car seat safety restraint.
Make sure to use it along and do not replace by
other item.
CAUTION

Using the child car seat properly can reduce injury
and prevent death, please check the following
parts before use. (Figure 5)
●The length of baby belt should be well adjusted.
(Figure 5a)
(To adjust by using adjustment belt)
●Check if the insert tongue has been fastened
into the buckle, and the indicator turns green.
(Figure 5b)
●Check the child safety seat is secured in the
vehicle seat. (Grip the side and the base of child
car seat to confirm by back and forth shaking.)
(Figure 5c)
●Through the shoulder belt insert outlet to set the
shoulder belt holding to the pelvis position.
(Figure 5d)
●Check if the vehicle seat belt inside the car is
too loose or not twisted. (Figure 5e)
●The insert tongue of the seat belt is totally
fastened into the buckle. (Figure 5f)
●Check if the baby belt is not loose or not
twisted. Always pull down the waist belt to hold
the pelvis position. (Figure 5g)
Daily checking
Using the inner cushion
Figure 6 - Install the inner cushion
Inner cushion is designed to offer extra protection to
newborn.
Use the inner cushion if the child's weight is below 7kg.
1. Press the buckle button and release the insert metal,
remove the hip part of inner cushion.
2. Remove the crotch belt cover through the crotch belt
hole and then install.
3. Installation string pass through the second shoulder belt
insert holes from the top to install.
4. At back of the main body to do the installation or the
detachment.
DANGER : Wrong usage of inner cushion may
endanger baby. Please use correctly.
WARNING : Improper operation may cause
to child injury. Inner cushion must be used for baby
below 7kg.
Do not apply the inner cushion in forward facing
mode for baby above 7kg.

Attach and detach the seat cover
CAUTION : Do not place detached inner
cushion inside the vehicle, in case it may move
around when sudden brake and affect driving.
Do not hold the child car seat with the inner cushion.
Figure 7 - Detach the seat cover
1. Release the storage belt cover at the back of main body.
2. Release the baby seat belt from baby belt adjustment
metal.
3. Pull out the baby shoulder belt from the baby shoulder
belt cover.
※ Left and right baby shoulder belt covers are linked.
4. Pull out both baby shoulder belt covers from the back.
Pulling out the baby shoulder belt by one side first.
5. After left and right holes released from the top, then
release the side strings and hooks.
Installing to the vehicle:
DANGER : Unsecured child car seat may not
function as designed and may cause to danger. In
such case, try to install to other seats.
Always fix the child car seat with seat belt during
installation.
Do not install the child car seat onto the vehicle
seat equipped with an air bag. In case of collision,
the exploded air bag will expose the child to major
impact which is extremely dangerous.
* Only install the child car seat to vehicle seat with
a side air bag is acceptable.
DANGER : Do not install on a vehicle seat of
where the seat belt is damaged.
Always secure a child car seat with seat belt inside
the vehicle.
Do not install the child car seat to passenger seat if
affect driving and cause to traffic safety hazards.
Figure 8 - Preparation
1. Park the vehicle on flat ground where both left and right
door can be opened completely.
2. Slide the front seat forward and recline the backrest to
the front for easier installation.
• To install on vehicle seats with sliding function
Slide the seat forward after installation and the child car
seat will become even more secured.
• About the headrest of vehicle seat
Check the shape of headrest in vehicle seat, remove the
headrest of vehicle seat if it is detachable.

Match this gray line against the child car seat on the side of the reference line
Adjust installation angle until this line is seen vertical within the
orange area when checking in the right side of the main body.
Adjust installation angle until this line is seen vertical within the
orange area when checking in the left side of the main body.
Right Side
of the main body
Left Side
of the main body
To confirm the installation angle
use, the child car seat be
installed in backward facing
mode. Using this Angle Checker
to check the line is seen vertical
(against to the ground around
90°) within the orange area.
To confirm the installation
angle use when the child
car seat be installed in
backward facing mode.
Angle Checker
163076010 15.06