Comelit 6741W User manual

Amazon, Alexa and all related logos
are trademarks of Amazon.com, Inc. or
its aliates.
EN
USER MANUAL
Mini Hands-Free Wi-Fi Door Entry Monitor
Art. 6741W, Art. 6741W/BM

2
Table of contents
Warning
Intended use
This Comelit product has been designed and manufactured for use in the creation of audio and video communication
systems in residential, commercial, industrial and public buildings.
Installation
All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with
careful observation of the indications provided in the manuals / instruction sheets supplied with those products.
Safe usage
Comelit Group S.p.A. declines any responsibility for improper use of the apparatus, for modifications made by third
parties for any reason or purpose, and for the use of accessories and materials which are not originals.
Caution! In order to reduce the risk of faults and electric shocks: do not open the device or carry out any repairs
yourself. If necessary, request the services of qualified personnel. Do not insert objects or pour liquids into the device.
Service
Clean using a damp cloth. Do not use alcohol or other aggressive products.
Any repairs must be carried out:
• for the products themselves, exclusively by Comelit Group S.p.A.,
• for the systems, by qualified technical personnel.
Disclaimer
Comelit Group S.p.A. does not assume any responsibility for
• any purpose other than the intended use
• failure to observe the indications and warnings contained in this manual / instruction sheet.
Comelit Group S.p.A. reserves the right to change the information provided in this manual / instruction sheet at any
time and without prior notice.
Warning ............................................................................................ 2
Description....................................................................................... 3
Key functions............................................................................................4
LED meanings ..........................................................................................4
Navigation mode.............................................................................. 5
Device functions.............................................................................. 5
Video memory ..........................................................................................5
Video messages .......................................................................................5
Wi-Fi ..........................................................................................................5
Wi-Fi connection status - Key to symbols..........................................5
Wi-Fi setup via the door entry monitor ...............................................6
Procedure via WPS......................................................................6
Manual procedure........................................................................6
Wi-Fi setup via the COMELIT app ......................................................6
Wi-Fi reporting unconnected ..................................................................6
App registration........................................................................................6
Face Recognition .....................................................................................7
Using “Face Recognition”...................................................................7
How to enable face recognition..........................................................7
How to disable face recognition .........................................................7
How to register a face using the door entry monitor ..........................7
User management ..............................................................................8
Manage Actions..................................................................................8
Voice assistants .......................................................................................8
Voice Assistants..................................................................................8
Unlock voice confirmation code .........................................................8
Language ..................................................................................................9
Diagnostics...............................................................................................9
Information ...............................................................................................9
Reset .........................................................................................................9
Update product ........................................................................................9

6
4
3
1
2
5
SCAN QRCODE DOWNLOAD
COMELIT APP
TO
INFO
1.
2.
3
Description
Hands-free Mini Wi-Fi door entry monitor for Simplebus 2 system. When used in conjunction with the Comelit app, available to
download free of charge from the Google and Apple stores, and/or the Alexa/Ecoshow/Google voice assistants, it can be used
to answer calls directly from your smartphone/tablet/assistant device, both locally and remotely. It can be used to enable the
“Face recognition” function directly from the app, to automatically - once a person has been recognised - send a lock-release
command (enabled by default), trigger an actuator to control a light or additional opening and receive notification when a known
individual makes a call. Replacing an old door entry monitor to benefit from all the advantages offered by Wi-Fi technology is no
longer problematic: Mini Wi-Fi is actually compatible with all types of Comelit Simplebus 2 video entry phone system and does
not require any additional masonry work. Supplied with mounting backplate and riser distribution terminal art. 1214/2C.
The 6741W/BM version is equipped with a magnetic induction audio amplification system.
Face recognition on the Mini Wi-Fi monitor (6741W, 6741W/BM) is based on a 2D geometric measurement which maps the face, identifying the position of the
features (eyes, nose, mouth...) and measuring the distance between them. This technology can be used to open doors and gates in busy areas, however it does
not guarantee the highest security level. For further information please refer to the “General conditions of use and license” and the “Privacy Policy” on
https://www.comelitgroup.com/en/systems/video-entry-technology/away-from-home-app/
Privacy Policy: A warning sheet is provided to inform the user of this subject, with the following text: “This door entry monitor uses a face recognition system, if
activated. By using the door entry monitor you authorise the processing of your personal data in accordance with the “Comelit Privacy Policy” as outlined on the
websitehttps://www.comelitgroup.com, in the Privacy Policy section.
If the door entry monitor systems equipped with face recognition are activated by the purchaser, personal data (images and photos) will be processed to allow
the user to link an image converted to an algorithm with a name and/or screen name.”
fDownload the Comelit APP free of charge and install it on your mobile device.
All the instructions required to set up system
management via the Comelit app are provided in
the INFORMATION section.
1. Brightness control
fTo increase the value, turn clockwise
2. Loudspeaker volume control
fTo increase the value, turn clockwise
3. 4.3” / 16:9 LCD display
4. Soft-touch keys
5. Microphone
6. Call volume adjustment (high - medium - low)

4
MENU
PRESS AND RELEASE
fwith the display off: switch on the display
ffrom the homepage: switch o the display
fduring menu navigation: return to previous
screen
AUDIO
fPRESS AND RELEASE: answer/end a call
√Incoming call:
fPress to start the conversation
fPress again to interrupt the conversation
fPRESS AND HOLD (5s): enable/disable the
“Automatic answer” function (Hands-Free
function); on receipt of a call the device will
answer automatically
LOCK-RELEASE
Use this key to open the corresponding door lock.
fPRESS AND RELEASE: open the door
PROGRAMMABLE KEYS
fPRESS AND RELEASE (with display off): carry
out the programmed function
fPRESS AND HOLD (5s): default key 4 to
enable/disable the “Door opening upon call”
function (Doctor),
default key 2 to enable/disable the
programmed self activation function
ARROW KEYS
fPRESS AND RELEASE during menu
navigation: up, down, right and left
CONFIRM SELECTION
fPRESS AND RELEASE: confirm a selection,
select / deselect an option
MESSAGE MENU
fPRESS AND RELEASE with monitor on:
shortcut to the video messages section
“SILENT” MODE (PRIVACY)
fPRESS AND RELEASE:
enable/disable “Silent”
mode (Privacy) to disable the ringer in response
to a call from the external entrance panel and
from the porter switchboard
FLASHING LED: user notification present
STEADY LED: conversation in progress and/or
“Automatic answer” function (Hands Free function)
enabled
FLASHING LED: incoming call
1 FLASH: door open confirmed
FLASHING LED: door open or incoming call from
the external unit
4 FLASHES: the device called is busy
3 FLASHES EVERY 5 SEC: “Door opening upon
call” function (Doctor) enabled
STEADY LED: “Silent” mode (Privacy) enabled
STEADY AND FLASHING LED: “Door opening upon
call” function (Doctor) and “Silent” mode (Privacy)
enabled
Key functions LED meanings
The functions that can be activated via press and hold
are only available if by the installer.
fClick here to find out how to control your Comelit
devices with smart speakers
Amazon, Alexa and all related logos are
trademarks of Amazon.com, Inc. or its
aliates.

5
Navigation mode
fWith the door entry monitor in standby, press to switch
on the display
fFrom the homepage, press to switch o the display
fNavigate the menu using and
fPress to confirm a selection
fPress to return to the previous screen
Wifi configuration
MY-Wifi
Other Wi-fi_1
Other Wi-fi_2
Other Wi-fi_3
Device functions
Video memory
This function automatically starts video recording in the event
of no reply.
fScroll through the menu to the icon
and press to confirm and enable the
function
» The blue icon indicates that the
function is active.
Video messages
This function allows you to view the video messages stored in
the memory.
fScroll through the menu to the icon and
press to confirm and access the video
memory submenu
» The blue icon indicates that there is at
least one video message that has not
yet been viewed.
Wi-Fi
The icon in the main menu offers access to the Wi-Fi
connection settings for the device while indicating its
connection status.
Wi-Fi connection status - Key to symbols
Access point
If the system requires wireless connection of the
door entry monitor, link the device to the local
router.
No connection
Door entry monitor Wi-Fi reception is enabled,
therefore you need to check the router
conditions (on/o, correct operation, distance
from the monitor, correct password).
Router connected, no internet
Check with your internet provider.
Signal strength:
Excellent
Good
Moderate
Weak

6
Wi-Fi setup via the door entry monitor
fScroll through the menu to the Wi-Fi icon
and press to confirm and access the
Wi-Fi connection setup
» the monitor will scan available
networks
We recommend linking the monitor to your router by means
of the WPS button. If the router does not have a WPS button,
proceed manually.
Procedure via WPS
Once the networks have been scanned, press
for secure linking via WPS and follow the instructions
which appear on the display.
Wifi configuration
MY-Wifi
Other Wi-fi_1
Other Wi-fi_2
Other Wi-fi_3
select exitwpsscroll
Manual procedure
1. If the router does not have a WPS button, select your
network and confirm by pressing
MY-Wifi
Other Wi-fi_1
Other Wi-fi_2
Other Wi-fi_3
Wifi configuration
select exitwpsscroll
2. Enter the password manually and confirm using
password
q w e r t y u i o p
a s d f g h j k l
z x c v b n m
@ _
123
scroll
exit
select
left right
Install the COMELIT application on your smartphone to
ensure you have all the device functions at your disposal.
Wi-Fi setup via the COMELIT app
Setup can also be carried out from your smartphone via the
app.
Setup
This section allows you to configure the device (language,
date and time...)
fScroll through the menu to the Setup
icon and press to confirm and access
device setup
SETUP
Wi-Fi reporting unconnected
App registration
Face recognition
Voice Assistants
Date and time settings
Language
select exitscroll
Wi-Fi reporting unconnected
The door entry monitor provides pop-up notification in the
event that there is no Wi-Fi connection
between the door
entry monitor
and the router.
The lack of Wi-Fi connection will prevent calls from being
received on a smartphone (and, in some types of system, on
the
door entry monitor too) and cancels all main functions
that can be controlled via the app.
fSelect/deselect the function to enable/disable the pop-up
notification.
Wi-Fi reporting unconnected
App registration
Permits a new user register his/her own smartphone in order
to gain access to door entry monitor functions, or prohibits
him/her from doing so.
fSelect/deselect the function to enable/disable app
registration
App registration

7
Face Recognition
Enable the “Face recognition” function
• to send the lock-release (enabled by default) and/or actuator
command automatically on recognition of a subject.
• to receive notification when a known person makes a call.
The “Face recognition” function is only
available with Software version 1.3.0. or later
(to update the door entry monitor , please refer to
chapter “Update product”).
Using “Face Recognition”
When the monitor (and the App) receives a call from the
external unit, the captured image is displayed and the call
ringtone sounds.
»if the captured image matches one of those saved
by the user as a “Known face” (see “How to register
a face using the door entry monitor”), after the few
seconds required for checking, the monitor emits a tone
and sends the lock-release command* (e.g.: open gate)
and/or actuator command (e.g.: switch on a light).
»Users connected to the system via the Comelit App
will receive a notification that face recognition has
taken place.
* the lock-release command following face recognition is
enabled by default; the actions to be carried out following
face recognition can be managed via the Manage Actions
menu (see “Manage Actions”)
How to enable face recognition
“Face Recognition” can ONLY be enabled via
the Comelit App.
1. If the monitor is in BUILDING mode, activate the monitor
by pressing the MENU key.
2. Open the Comelit App and wait for the connection icon
in the top right-hand corner to turn green (the user must
already be registered).
3. Open the app menu , select Manage devices /
Door entry monitors / Settings and enable the “Face
recognition” function.
Face recognition
SETTINGS
How to disable face recognition
“Face recognition” can also be disabled on the
door entry monitor.
fOn the Setup/Face recognition screen, deselect “Face
recognition” to disable the function.
Face recognition
Face recognition
Faces detected
User management
Actions
select exitscroll
How to register a face using the door entry monitor
1. Position yourself in front of the external unit and make a
call.
For optimal recognition:
• the subject should be in the foreground
(the whole head and top of the shoulders
should be visible);
• the subject should be facing the camera;
• the face should be well-lit: avoid capturing
the subject in poor light conditions or
against the light;
• several images of the same subject can be
saved to improve the recognition function.
• to guarantee correct recognition, only save
photographs in which the subject has
their face uncovered: it should not be
hidden by masks, scarves, helmets...
2. Wait for the call to reach the monitor.
3. End the call.
4. Open the Setup/Face recognition/Faces detected menu.

8
Faces detected
select exitscroll
Unknown
recalculate
long press to delete
5a. Press and enter the name of the recognised subject.
SARA
Q W E R T Y U I O P
A S D F G H J K L
Z X C V B N M
scroll
exit
select
left right
fUse to confirm and register the face and enable
face recognition.
There is no limit to the number of faces that can
be stored.
press (recalculate) to automatically recognise the
face of a registered subject and avoid having to enter the
name manually.
or:
5b. Press and hold to delete the selected face.
User management
This function is used to delete/enable/disable a registered
user.
User management
select exitdeletescroll
SARA
JOHN
fpress to delete the selected user.
or:
fSelect/deselect the registered subject using to
enable/disable the action command following “Face
Recognition”.
Manage Actions
This function is used to manage the actions to be carried out
following face recognition.
fThe Lock-release function is enabled by default. Select/
deselect the Lock-release and/or Generic actuator
functions to enable/disable them.
Manage Actions
select exitscroll
Lock-release
Generic actuator
Voice assistants
Integration with Alexa and Google Assistant allows
management of Comelit devices via voice assistants.
Voice Assistants
fSelect/deselect “Voice Assistants” to enable/disable the
function
Voice Assistants
Voice Assistants
Unlock voice confirmation code
select exitscroll
Unlock voice confirmation code
When “Voice confirmation code” is deselected, door opening
can be controlled via a simple voice command:
“Alexa, unlock the front door”
“OK, google! Unlock my front door”
The “Voice confirmation code” can be used to open the door
using a confirmation code (only available with Alexa)
1. Select “Unlock voice confirmation code”
Voice Assistants
Voice Assistants
Unlock voice confirmation code
select exitscroll
2. Open the Alexa app (configured as indicated in the
guide: https://www.comelitgroup.com/en/comelitapp-
voiceassistants)
3. Select Devices (1) / Door Locks (2)
1
2

9
4. Tap “Front Door Lock”
5. Tap “Edit Voice Code” and enter an “unlock confirmation”
code.
» When you receive a call from the external entrance
panel after giving the command: “Alexa, unlock
the front door”, the voice confirmation code will be
requested before the door lock is opened.
Date and time setting
Allows setting of the device date and time, by selecting your
time zone.
Date and time setting
GMT O London, Lisbon, Dublin
GMT +2 Athens, Istambul, Cairo
GMT +3 Moscow, Bahrain, Kuwait
GMT +3.30 Tehran
GMT +4 Abu Dhabi, Muscat, Baku
GMT +1 Paris, Zurich, Rome
select exitscroll
fNavigate to the desired option, then confirm the selection
or exit
Language
Used to set the device language.
Language
Italiano
Français
Español
Português
Deutsch
English
select exitscroll select exitscroll
fNavigate to the desired option, then confirm the selection
or exit
Diagnostics
Diagnostics menu for the installer.
Diagnostics
Send debug log remotely
Push Notification Test
Speed Test
Restart
select exitscroll
Information
This menu provides technical information about the device
(e.g. type of device, versions, addresses, etc.).
SW: beta-1.1.0-devel12
beta-1.1.0-devel4
v1.1.1 devel 10
IP: 172.25.150.74 (255.255.255.0)
SN: 00B06c1915A1
GW: 172.25.150.250
SETUP
exit
select exitscroll
Press to exit the screen
Reset
The menu can be used to:
• reset the Wi-Fi parameters by returning the device to
access point mode
• restore the factory settings of the device by deleting
the user and system configurations.
Reset menu
Reset Wi-Fi parameters
Factory reset
select exitscroll select exitscroll
fNavigate to the desired option, then confirm the selection
or exit
Update product
Select the option “Update product” to install the latest SW
version available.

3rd edition 04/2021 code 2G40002487
www.comelitgroup.com
Via Don Arrigoni, 5 - 24020 Rovetta (BG) - Italy
CERTIFIED MANAGEMENT SYSTEMS