Comelit HFX-700B User manual

FREE DOWNLOAD
MYCOMELIT, L'APP PER IL PROFESSIONISTA
EN
TECHNICAL
MANUAL
FR
MANUEL
TECHNIQUE
ES
MANUAL
TÉCNICO
MYCOMELIT: THE APP FOR PROFESSIONALS
MYCOMELIT, L’APPLI POUR LES PROFESSIONNELS
MYCOMELIT, LA APP DEL PROFESIONAL
Complete technical manual for
Single-User Kit HFX-700B
Manuel technique complet pour
le Kit à un usager HFX-700B
Manual técnico integral
del Kit de Usuario Único HFX-700B

EN
2
Thank you for purchasing the hands free kits art. HFX-700B!
This intercom system uses 2-wire installation and allows you to identify and communicate
with callers at the door, from the security and convenience of any room in your home
or office. Visitors activate the system by pressing a call pad on the external unit, which
sounds a doorbell chime as well as turning on the inside "hands free video monitor".
A two-way intercom then lets you speak with visitors after first visually identifying them.
It consists of a hands free monitor station and an external unit.
This kit is capable of expanding up to a total of 4 indoor monitors and 4 external units.

EN
3
Contents
1. Contents of the package............................................................ 4
2. Parts identification...................................................................... 5
2.1 EX-B EXTERNAL UNIT ..................................................................................................5
2.2 EX-7000H DOOR ENTRY MONITOR ............................................................................6
2.2.1 Capacitive-touch keys description.................................................................. 7
2.2.2 Indicator LED description................................................................................ 7
2.3 BUS POWER SUPPLY ART. 1209/4..............................................................................8
2.4 PARTS IDENTIFICATION FOR EXPANSION..................................................................8
2.4.1 Video Door Expander 1405 ........................................................................... 8
3. System installation...................................................................... 9
3.1 OPERATING DISTANCES AND SYSTEM LAYOUT .......................................................9
3.1.1 Single-User Kit art. HFX-700B ........................................................................ 9
3.1.2 Maximum expansion monitors in daisy chain connection.............................. 9
3.1.3 Full System Expansion Diagram.................................................................... 10
BASIC SINGLE-USER KIT
STANDARD INSTALLATION ........................................................................ 11
EXPANDED SINGLE-USER KIT
MAXIMUM EXPANSION IN DAISY CHAIN CONNECTION ......................... 12
EXPANDED SINGLE-USER KIT
MAXIMUM EXPANSION .............................................................................. 13
BASIC SINGLE-USER KIT
ADDITIONAL RELAY MODULE (ART. 1256) CONNECTION........................ 14
BASIC SINGLE-USER KIT
CCTV CAMERA INTERFACE (ART. 1409) CONNECTION............................ 15
3.2 ASSEMBLY MINI HANDSFREE ART. EX-7000H INTERNAL UNIT.............................16
3.3 INSTALLATION OF EXTERNAL UNIT ART. EX-B ........................................................17
3.3.1 How to change the nameplate of the external unit art. EX-B........................ 19
4. Additional features programming............................................ 20
4.1 ADDRESSING ART. EX-7000H BY MEANS OF DIP SWITCH ....................................20
4.2 CONFIGURATION CAPACITIVE-TOUCH KEYS ART. EX-7000H................................20
4.2.1 Preset function table ..................................................................................... 20
Legend ................................................................................................................... 20
4.2.2 Quick programming....................................................................................... 20
4.2.3 Special key programming.............................................................................. 21
4.2.3.1 HOW TO PROGRAM THE ACTUATOR FUNCTION......................... 21
4.2.3.2 HOW TO PROGRAM THE INTERCOM FUNCTION......................... 21
4.2.3.3 HOW TO PROGRAM THE PAGING FUNCTION .............................. 22
4.2.3.4 HOW TO PROGRAM THE SELF ACTIVATION FUNCTION.............. 22
4.2.3.5 HOW TO PROGRAM THE AUTOMATIC LOCK-RELASE (DOCTOR
MODE)................................................................................................... 23
4.3 RESET PROGRAMMING ART. EX-7000H...................................................................23
4.4 RANGE PROGRAMMING ART. EX-7000H .................................................................23
4.5 DOOR ENTRY MONITOR RINGTONE SELECTION ART. EX-7000H .........................24
4.6 CONFIGURATION EX-B...............................................................................................24
4.6.1 External unit addressing................................................................................ 24
4.6.2 Function programming.................................................................................. 25
4.6.3 User code...................................................................................................... 25
4.7 ACTUATOR RELAY MODULE ART. 1256....................................................................26
4.7.1 Parts description ........................................................................................... 26
4.7.2 Functions....................................................................................................... 26
4.8 CCTV CAMERA INTERFACE ART. 1409 .....................................................................27
4.8.1 Parts description ........................................................................................... 27
4.8.2 Operation ...................................................................................................... 27
4.8.2.1 PROGRAMMING THE NUMBER OF CAMERAS CONNECTED...... 27
4.8.2.2 FUNCTION 1: GENERIC ACTUATOR MODE ................................... 27
4.8.2.3 FUNCTION 2: ACTUATOR WITH CODE MODE............................... 28
4.8.2.4 COMPATIBILITY TABLE ................................................................... 28
5. System function......................................................................... 29
5.1 PERFORMING CALLS.................................................................................................29
5.1.1 How to call from the external unit ................................................................. 29
5.1.2 How to answer a call from an internal unit .................................................... 29
5.1.3 How to transmit a call to the other internal units........................................... 29
5.1.4 How to answer a call from an internal unit .................................................... 29
5.2 LOCK RELEASE FUNCTION .......................................................................................29
5.3 PAGING CALL..............................................................................................................30
5.3.1 How to initiate a paging call .......................................................................... 30
5.3.2 How to answer a paging call ......................................................................... 30
5.4 SELF ACTIVATION FUNCTION....................................................................................30
5.4.1 How to display on the door entry monitor the image transmitted from the CCTV
camera............................................................................................................. 30
5.5 ACTIVATION / DEACTIVATION SILENT MODE (PRIVACY) .........................................31
5.6 ACTIVATION / DEACTIVATION AUTOMATIC LOCK-RELASE (DOCTOR MODE).......31
5.7 ACTIVATION / DEACTIVATION AUTOMATIC ANSWER MODE ..................................31
5.8 BRIGHTNESS CONTROL............................................................................................32
5.9 LOUDSPEAKER VOLUME CONTROL.........................................................................32
6. Technical specification ............................................................. 33
6.1 EX-7000H MAIN DOOR ENTRY MONITOR ................................................................33
6.2 EX-B EXTERNAL UNIT ................................................................................................33
6.3 BUS POWER SUPPLY ART. 1209/4............................................................................33
6.4 ACTUATOR RELAY MODULE ART. 1256 ....................................................................33
6.5 REMOTE CAMERA MODULE ART. 1409 ....................................................................33
6.6 DOOR EXPANDER ART. 1405 ....................................................................................33
7. Appendix .................................................................................... 34
7.1 WARNING ....................................................................................................................34
7.2 IMPORTANT SAFETY INSTRUCTIONS.......................................................................34
7.3 FCC CLASS B NOTICE................................................................................................35
7.4 GENERAL PRODUCT WARRANTY:............................................................................35

EN
4
1. Contents of the package
door entry monitor backplate
×1 ×1 ×4 ×4
screws
dry wall
anchors
EX-7000H - Door entry monitor
EX-7000H 1209/4EX-B
HFX-700B Kit
EX-B - External unit
screwspower supply
×1 ×2
1209/4 - BUS Power supply Technical manual
Nameplate
for 1 user screwsexternal unit
×2 ×2
dry wall
anchors
×1
YOUR NAME
external unit
door entry monitor
power supply
backplate
Nameplate dry wall
anchors
dry wall
anchors
screws
screws
screws
for 1 user

EN
5
2. Parts identification
2.1 EX-B EXTERNAL UNIT
1. Hole for wall mounting
2. Terminal block
L L BUS line connection
RTE programmable RTE (local lock-release input) or
DO input (door open indication)
GND / SE- RTE and door lock input reference negative
SE+ electric door lock connection
NO relay normally open contact
Crelay common contact
3. Microphone
4. Wide-angle colour camera
5. Camera lighting LED
It can be disabled by setting DIP 7 to ON, see page 25
“4.6.2 Function programming” )
6. Nameplate
7. Call button
8. Adjustment trimmer (See page 18)
9. Addressing and programming DIP-switches
10. CNF Programming confirmation button
11. S2 Special programming selector
12. S1 Button programming selector
13. Loudspeaker
14. Fixing screw
3.15 in
5.90 in
1.06
1.14
1.18 in
9.
11.
12.
13.
10.
14.
8.
1. 3.
4.
5.
6.
7.
2.
1.

EN
6
1. Loudspeaker volume control
2. Brightness control
3. 4.3" Color LCD Screen
4. Call volume adjustment (high - medium - low)
5. Microphone
6. Capacitive-touch keys
7. Speaker and audio activation key / Paging call key
8. S1 Micro-switches for user code setting
9. S2 Micro-switches for programming keys and functions
DIP 1-2-3-4 for key function programming
DIP 5-6 access to programming
DIP 7 unused
DIP 8 leave default setting (OFF)
10. Factory setting - DO NOT CHANGE!
11. Factory setting - DO NOT CHANGE!
12. CV 5 Video closing jumper
13. Pin for securing terminal block
Terminal block for system connection
L L Bus line connection terminals
CFP1 CFP2 Outside door call input
2.2 EX-7000H DOOR ENTRY MONITOR
4.52 in 0.83 in
6.29 in
6.
7.
1.
2.
3.
4.
5.
8.
9.
10.
11.
13.
12.

EN
7
2.2.1 Capacitive-touch keys description
SPEAKER AND AUDIO ACTIVATION KEY / PAGING CALL KEY / HANDS-FREE MODE ACTIVATION KEY
Answer call
Can be used to activate a conversation with the external unit or to end a conversation.
Paging call
Internal paging function: can be used to make a paging call to the internal units with the same user code.
General paging to another user code: can be used to make a paging call to the internal units with another user code.
Hands-Free mode
On receipt of a call the audio will be activated automatically.
LOCK-RELEASE KEY
Can be used to activate the lock-release relay
ACTUATOR KEY [default]
Generic actuator function: can be used to activate the relay for a generic actuator installed within the system.
Coded actuator function: can be used to activate the relay for a specific actuator installed within the system.
SELF ACTIVATION KEY [default]
Can be used to receive images from the main external unit cameras (press the key again to cycle through several external unit)
1-2 key [programmable] INTERCOM FUNCTION
Internal intercom function: can be used to make a call to the internal units with the same user code.
General intercom to another user code: can be used to make a call to the internal units with another user code.
1-2 key [programmable] AUTOMATIC LOCK-RELASE (DOCTOR MODE)
Can be used to enable automatic activation of the lock-release in response to a call from the external unit.
SILENT MODE (PRIVACY) KEY
Can be used to enable or to disable the ringtone for calls from the external unit and paging.
2.2.2 Indicator LED description
FLASHING LED: incoming call
STEADY LED (WITH CALL): In communication
STEADY LED (IDLE): Hands-Free mode enabled
FLASHING LED: Incoming call
FLASHING LED (SLOWLY): door open
1 FLASH AFTER PRESSING: door opening confirmation
1 FLASH AFTER PROG.: Confirm “Key programming executed”
STEADY LED: Silent mode (Privacy) active
OFF AND FLASHING LED (3 every 5 sec.): Automatic lock-relase active
STEADY AND FLASHING LED (3 every 5 sec.): Automatic lock-relase and Silent mode (Privacy) active
4 FLASHES: The called device is busy
See "5. System function" on page 29

EN
8
2.3 BUS POWER SUPPLY ART. 1209/4
2.4 PARTS IDENTIFICATION FOR EXPANSION
ADDITIONAL INTERNAL UNIT
EX-7000H
EX-7000H
The Art. EX-7000H is the Additional Internal Unit for Single-User Kits
(see page 6 for further information)
ADDITIONAL EXTERNAL UNIT
EX-BSB
+
EX-B 1405
The Art. EX-BSB is the Additional External Unit for Single-User Kits and
contains the external unit Art. EX-B (see page 5 for further information)
and the Video Door Expander Art. 1405 (see point 2.4.1 for further
information)
2.4.1 Video Door Expander 1405
1. LM LM Art. 1209/4 connection
2. LS | LS additional external unit connection
LP | LP main external unit connection
1. LP LP external unit connection
2. L1 | L1 door entry monitor connection 1
L2 | L2 door entry monitor connection 2
L3 | L3 door entry monitor connection 3
L4 | L4 door entry monitor connection 4
3. Video closing jumpers (REMOVE WHEN LINE IS USED)
4. L N mains power input 110-240 V~
4.17 in 3.52 in
2.44 in
50-60Hz
OUTPUT/SORTIE 34V 0.5A 2A 1'on/5'o
ta=40°C
110V-240V 1.4A
LNL4
L4
L3
L3
INPUT/D'ENTREE
Dopo un cortocircuito,per ripristinare l'apparecchio,
interrompere l'alimentazione per circa 1 minuto.
To reset the operation after a short circuit,cut o mains
voltage for about 1 minute.
Apres un court circuit, pour remettre en fonction l'appareil,
interrompre l'alimentation pendant environs une minute.
L2L2L1L1
LP
LP
C US
R
Art.1209/4
1.
2.
3.
4.
1. 2.
3.55 in
1.42 in 2.28 in

EN
9
3.1.1 Single-User Kit art. HFX-700B
A
B
C
1209/4
EX-7000H
EX-B
HFX-700B
A
B
C
1209/4
EX-7000H
EX-7000H
expansion
door entry monitor
EX-7000H
expansion
door entry monitor
EX-7000H
expansion
door entry monitor
HFX-700B
EX-B
3.1.2 Maximum expansion monitors in daisy chain connection
expansion
door entry monitor
expansion
door entry monitor
expansion
door entry monitor
Maximum 2 door entry
monitors per output
3. System installation
Wire Assignment Wire Assignment Wire Type Amax. Bmax. Cmax.
SINGLE PAIR CABLE CAT5
24AWG
1,115 feet
(340 m)
557 feet
(170 m)
557 feet
(170 m)
DOUBLE PAIR
CABLE
CAT5
24AWG
1,312 feet
(400 m)
656 feet
(200 m)
656 feet
(200 m)
MULTI PAIR CABLE
FOLLOW THE COLORS
SHOWN IN THE DIAGRAM!
GREEN
ORANGE
BLU
GREEN / WHITE
ORANGE / WHITE
BLU / WHITE
BROWN / WHITE
BROWN
CAT5
24AWG
1,312 feet
(400 m)
656 feet
(200 m)
656 feet
(200 m)
NON-BRAIDED
CABLE AWG22 1,115 feet
(340 m)
557 feet
(170 m)
557 feet
(170 m)
NON-BRAIDED
CABLE AWG18 1,312 feet
(400 m)
656 feet
(200 m)
656 feet
(200 m)
3.1 OPERATING DISTANCES AND SYSTEM LAYOUT

EN
10
1209/4
EX-7000H
1405 14051405
EX-B EX-B EX-B EX-B
A
B
C
EX-7000H
expansion
door entry monitor
EX-7000H
expansion
door entry monitor
EX-7000H
expansion
door entry monitor
HFX-700B
EX-BSB
expansion external unit
EX-BSB
expansion external unit
EX-BSB
expansion external unit
3.1.3 Full System Expansion Diagram
expansion
door entry monitor
expansion external unit expansion external unit expansion external unit
expansion
door entry monitor expansion
door entry monitor
NOTE: This system is capable to expanding up to 4 external units and 4 internal units. For alternative application please consult
our technical support engineer first.
At the first connection on the riser, the internal units automatically acquire theirs sub-addresses.
The LEDs and flash simultaneously for some seconds. After the procedure the LEDs will turn off.
The art. EX-BSB is the additional external unit for Single-User Kits and contains the external unit art. EX-B and the art. 1405
Video door expander.
EX-BSB
+
EX-B 1405

EN
11
C
F
P
LL
C
F
P
12
EX-7000H
1209/4
L1 L1 L2 L2
LN
110-240V
LP LP L3 L3 L4 L4
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
LL
E
T
R
NO
GND
SE-
SE
+
C
EX-B
Local lock release button
LEAVE DEFAULT SETTINGS
STANDARD INSTALLATION
Basic single-user kit

EN
12
CV5
Video Closing Jumper
Video closing jumper
C
F
P
LL
C
F
P
12
EX-7000H
1209/4
L1 L1 L2 L2
LN
110-240V
LP LP L3 L3 L4 L4
C
F
P
LL
C
F
P
12
EX-7000H
EX-B
C
F
P
LL
C
F
P
12
EX-7000H
C
F
P
LL
C
F
P
12
EX-7000H
REMOVE WHEN LINE IS USED
REMOVE CV5
HFX-700B
REMOVE CV5
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
LEAVE DEFAULT SETTINGS LEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGSLEAVE DEFAULT SETTINGS
REMOVE WHEN LINE IS USED
REMOVE CV5 REMOVE
CV5
MAXIMUM EXPANSION IN DAISY CHAIN CONNECTION
Expanded single-user kit

EN
13
C
F
P
LL
C
F
P
12
EX-7000H EX-7000H EX-7000H EX-7000H
HFX-700B
1209/4
L1 L1 L2 L2
LN
110-240V
LP LP L3 L3 L4 L4
C
F
P
LL
C
F
P
12
C
F
P
LL
C
F
P
12
C
F
P
LL
C
F
P
12
1405 1405 1405
L
M
L
M
L
S
L
S
L
P
L
P
L
M
L
M
L
S
L
S
L
P
L
P
L
M
L
M
L
S
L
S
L
P
L
P
THESE DEVICES MUST BE STORED TOGETHER MAXIMUN CABLE LENGHT FOR 1405: 3 feet
REMOVE WHEN LINE IS USED
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
0123
SET THE ADDRESS SET THE ADDRESS SET THE ADDRESS
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
ON
1 2 3 4 6 75 8
ON
1 2 3 4 6 75 8
ON
1 2 3 4 6 75 8
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
LEAVE DEFAULT SETTINGSLEAVE DEFAULT SETTINGSLEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS SET THE ADDRESS SET THE ADDRESS SET THE ADDRESS
REMOVE WHEN LINE IS USED
THESE DEVICES MUST BE STORED TOGHETHER MAXIMUM CABLE LENGHT FOR 1405: 3 feet
Local lock release button
Expanded single-user kit
MAXIMUM EXPANSION
EX-BSB
+
1405EX-B
EXTERNAL UNIT ADDRESSING
CODE DIP 1 DIP 2 DIP 3
0
(default) OFF OFF OFF
ON
1 2 3 4 6 75 8
1ON OFF OFF
ON
1 2 3 4 6 75 8
2OFF ON OFF
ON
1 2 3 4 6 75 8
3OFF OFF ON
ON
1 2 3 4 6 75 8
The addresses must be consecutive! correct: 0,1,2,3 / incorrect: 0,1,3

EN
14
HFX-700B
C
N
O
CNL L
~
-
~
+
L
OUT
L
IN
L
IN
L
OUT
LM
LM
1214/2C
1256
12/24V
AC/DC
12V~
1200UL
120V~
JP2
2 1
12
JP3
JP4
2
1
C
F
P
LL
C
F
P
12
1209/4
L1 L1 L2 L2
LN
110-240V
LP LP L3 L3 L4 L4
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
LL
E
T
R
NO
GND
SE-
SE
+
C
EX-B
EX-7000H
LEAVE DEFAULT
SETTINGS
For further information see page 26 "4.7 Actuator relay module Art. 1256"
Local lock release button
Basic single-user kit
ADDITIONAL RELAY MODULE (Art. 1256) CONNECTION

EN
15
EX-7000H
HFX-700B
1409
G
N
DA
N
I
3
V S
32
SV
2
S
11
V
+
-
~ ~
LLL
OUT
L
OUT
IN IN
120V~ 12V~
1200UL
C
F
P
LL
C
F
P
12
1209/4
L1 L1 L2 L2
LN
110-240V
LP LP L3 L3 L4 L4
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
ON
1 2 3 4 6 75 8
LL
E
T
R
NO
GND
SE-
SE
+
C
EX-B
LEAVE DEFAULT
SETTINGS
Local lock release button
For further information see page 27 "4.8 CCTV camera interface ART. 1409"
Basic single-user kit
CCTV CAMERA INTERFACE (Art. 1409) CONNECTION

EN
16
3
1
2
REMOVING THE TERMINAL
LLC
F
P
1C
F
P
2
1
2
3
INSERTING THE TERMINAL
4
32
2
3
1
+ + ,-.$ ,-.'
TO OPEN
1
2
3
5
63 in
51.18 in
optional
fixing
1
optional
fixing
3.2 ASSEMBLY MINI HANDSFREE ART. EX-7000H INTERNAL UNIT

EN
17
3.3 INSTALLATION OF EXTERNAL UNIT ART. EX-B
The camera must not be installed in front of light sources, or in places where the filmed subject is against the light. In dim environments, we
recommend additional lighting is provided.
CLACK
2
1
5A
3 4
64.96 in
32.28 in
81.10 in
79°
19.68 in 19.68 in
19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in
64.96 in
32.28 in
81.10 in
79°
19.68 in
19.68 in
19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in
64.96 in
32.28 in
81.10 in
79°
19.68 in 19.68 in 19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in 64.96 in
32.28 in
81.10 in
79°
19.68 in
19.68 in 19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in

EN
18
ADJUST IF NEEDED
DO NOT
CHANGE
Microphone
DO NOT
CHANGE
Loudspeaker
JOHN DOE
1.
2.
JOHN DOE
JOHN DOE
7 8
9
6
REMOVE TERMINAL IF NEEDED
1.
2.
3.
5B

EN
19
3.3.1 How to change the nameplate of the external unit art. EX-B
FAM. SMITH
1.
2.
FAM. SMITH
5 6
CLACK
JOHN DOE
JOHN DOE
1 3 4
JOHN DOE
2

EN
20
4. Additional features programming
4.1 ADDRESSING ART. EX-7000H BY MEANS OF DIP SWITCH
Set the user codes on S1 DIP Switches as indicated in “TABLE A” on page 25
4.2 CONFIGURATION CAPACITIVE-TOUCH KEYS ART. EX-7000H
4.2.1 Preset function table
S2 DIP-switches
DIP 1 DIP 2 DIP 3 DIP 4
0000
PAG /
ACT AI
1000 NULL AI
0100 INT AI
1100 ACT NULL
0010 ACT ACT ACT
1010 INT ACT
0110 AI D
0011 PAG PAG
1011 INT INT
0111 NULL NUL NULL NULL
1111 PROG
[ ] = Default
Legend
AUDIO KEY FUNCTION AI SELF ACTIVATION FUNCTION
SILENT MODE (PRIVACY) KEY INT INTERCOM CALL
PAG PAGING FUNCTION DAUTOMATIC LOCK-RELASE (DOCTOR MODE)
LOCK-RELEASE FUNCTION NULL No function
ACT ACTUATOR FUNCTION PROG Programmed functions: in this DIP switch setting, the buttons
control the programmed functions; the NON-programmed
buttons control functions referred to on line 0000.
See description functions on page 7.
4.2.2 Quick programming
For the quick programming of the following functions:
• generic actuator (ACT)
• internal intercom calls (INT)
• internal paging calls (PAG)
• self activation main external unit (AI)
• automatic lock-relase (Doctor mode) (D)
1Set the S2 DIP switches combination corresponding to the
functions that you want to programme for ALL KEYS as
shown in the “Preset function table”
Example
choose S2 DIP switches combination:
DIP 1 DIP 2 DIP 3 DIP 4
0100
for set all the following function:
PAG /
INT AI