Comelit HFX-9500M User manual

FREE DOWNLOAD
MYCOMELIT, L'APP PER IL PROFESSIONISTA
MYCOMELIT: THE APP FOR PROFESSIONALS
MYCOMELIT, L’APPLI POUR LES PROFESSIONNELS
MYCOMELIT, LA APP DEL PROFESIONAL
EN
TECHNICAL
MANUAL
FR
MANUEL
TECHNIQUE
ES
MANUAL
TÉCNICO
Complete technical manual for
Single-User Kit HFX-9500M
Manuel technique complet
pour le Kit Utilisateur Individuel HFX-9500M
Manual técnico integral
del Kit de Usuario Único HFX-9500M

EN
2
Thank you for purchasing the hands free kits art. HFX-9500M!
This intercom system uses 2-wire installation and allows you to identify and communicate
with callers at the door, from the security and convenience of any room in your home
or office. Visitors activate the system by pressing a call pad on the external unit, which
sounds a doorbell chime as well as turning on the inside "hands free video monitor".
A two-way intercom then lets you speak with visitors after first visually identifying them.
It consists of a hands free monitor station and an external unit.
This kit is capable of expanding up to a total of 8 indoor monitors and 4 external units.

EN
3
Contents
1. Contents of the package.......................................................... 4
2. Parts identification.................................................................... 5
2.1 EX-B EXTERNAL UNIT ...............................................................................................5
2.2 EX-9000H DOOR ENTRY MONITOR .........................................................................6
2.2.1 Capacitive-touch key description...................................................................7
2.2.2 Indicator LED description...............................................................................7
2.3 1209/8 BUS POWER SUPPLY ...................................................................................8
2.4 PARTS IDENTIFICATION FOR EXPANSION...............................................................8
2.4.1 Video Door Expander 1405 ............................................................................8
3. System installation.................................................................... 9
3.1 OPERATING DISTANCES AND SYSTEM LAYOUT ....................................................9
3.1.1 Single-User Kit art. HFX-9500M.....................................................................9
3.1.2 Maximum expansion monitors in daisy chain connection...........................10
3.1.3 Full system expansion diagram ....................................................................10
BASIC SINGLE-USER KIT
STANDARD INSTALLATION .......................................................................11
EXPANDED SINGLE-USER KIT
MAXIMUM EXPANSION IN DAISY CHAIN CONNECTION ........................12
EXPANDED SINGLE-USER KIT
MAXIMUM EXPANSION..............................................................................13
BASIC SINGLE-USER KIT
ADDITIONAL RELAY MODULE (ART. 1256) CONNECTION.......................14
BASIC SINGLE-USER KIT
CCTV CAMERA INTERFACE (ART. 1409) CONNECTION...........................15
3.2 ASSEMBLY ART. EX-9000H INTERNAL UNIT ...........................................................16
3.2.1 Surface-mounting (accessory for EX-9000H included) ................................16
3.2.2 Dry-wall mounting (accessory for EX-9000H included)................................17
3.3 INSTALLATION OF EXTERNAL UNIT ART. EX-B .......................................................18
3.3.1 How to change the nameplate of the external unit art. EX-B.......................20
3.4 SURFACE-MOUNTING OF THE POWER SUPPLY ART. 1209/8..............................20
4. Additional features programming............................................ 21
4.1 ADDRESSING ART. EX-9000H BY MEANS OF DIP SWITCH ...................................21
4.2 CONFIGURATION CAPACITIVE-TOUCH KEYS ART. EX-9000H...............................21
4.2.1 Preset function .............................................................................................21
4.2.2 Quick programming......................................................................................22
4.2.3 Special key programming.............................................................................22
4.2.3.1 HOW TO PROGRAM THE ACTUATOR FUNCTION........................22
4.2.3.2 HOW TO PROGRAM THE INTERCOM FUNCTION........................23
4.2.3.3 HOW TO PROGRAM THE PAGING FUNCTION .............................23
4.2.3.4 HOW TO PROGRAM THE SELF ACTIVATION FUNCTION.............24
4.2.3.5 HOW TO PROGRAM THE AUTOMATIC LOCK-RELEASE (DOCTOR
MODE) .................................................................................................24
4.3 PROGRAMMING RESET...........................................................................................25
4.4 PROGRAMMING RANGE..........................................................................................25
4.5 CHANGING DOOR ENTRY MONITOR RINGTONES................................................26
4.6 CONFIGURATION EX-B..............................................................................................26
4.6.1 External unit addressing...............................................................................26
4.6.2 Function programming.................................................................................26
4.6.3 User code.....................................................................................................27
4.7 ACTUATOR RELAY MODULE ART. 1256...................................................................28
4.7.1 Parts description ..........................................................................................28
4.7.2 Functions......................................................................................................28
4.8 CCTV CAMERA INTERFACE ART. 1409 ....................................................................29
4.8.1 Parts description ..........................................................................................29
4.8.2 Operation .....................................................................................................29
4.8.2.1 PROGRAMMING THE NUMBER OF CAMERAS CONNECTED.....29
4.8.2.2 FUNCTION 1: GENERIC ACTUATOR MODE ..................................29
4.8.2.3 FUNCTION 2: ACTUATOR WITH CODE MODE..............................30
4.8.2.4 COMPATIBILITY TABLE ..................................................................30
5. System function......................................................................... 31
5.1 PERFORMING CALLS................................................................................................31
5.1.1 How to call from the external unit ................................................................31
5.1.2 How to answer a call from an internal unit ...................................................31
5.2 PAGING CALL.............................................................................................................31
5.2.1 How to initiate a paging call .........................................................................31
5.2.2 How to answer a paging call ........................................................................31
5.3 SOFT-TOUCH KEY ACTIVATION................................................................................32
5.4 INTERCOM FUNCTION .............................................................................................32
5.4.1 How to transmit a call to the other internal units..........................................32
5.4.2 How to answer a call from an internal unit ...................................................32
5.5 SELF ACTIVATION FUNCTION...................................................................................32
5.5.1 How to display on the monitor the image transmitted from the CCTV camera
33
5.6 LOCK RELEASE FUNCTION ......................................................................................33
5.7 SILENT MODE (PRIVACY)..........................................................................................33
5.8 AUTOMATIC LOCK-RELEASE (DOCTOR MODE)......................................................33
5.9 HANDS-FREE MODE.................................................................................................33
5.10 ADJUSTMENTS ........................................................................................................34
5.10.1 Audio volume control .................................................................................34
5.10.2 Ringtone volume control ...........................................................................34
5.10.3 Contrast control .........................................................................................34
5.10.4 Brightness control .....................................................................................34
6. Technical specification ............................................................. 35
6.1 EX-9000H MAIN DOOR ENTRY MONITOR ...............................................................35
6.2 EX-B EXTERNAL UNIT ...............................................................................................35
6.3 1209/4 BUS POWER SUPPLY ...................................................................................35
6.4 ACTUATOR RELAY MODULE ART. 1256 ...................................................................35
6.5 REMOTE CAMERA MODULE ART. 1409 ...................................................................35
6.6 VIDEO DOOR EXPANDER ART. 1405 .......................................................................35
7. Appendix .................................................................................... 36
7.1 WARNING ...................................................................................................................36
7.2 IMPORTANT SAFETY INSTRUCTIONS......................................................................36
7.3 FCC CLASS B NOTICE...............................................................................................36
7.4 GENERAL PRODUCT WARRANTY:...........................................................................37

EN
4
1. Contents of the package
EX-9000H 1209/8EX-B
HFX-9500M Kit
tech sheet
×3 ×3
screws
dry wall
anchors
Nameplate
for 1 user
external unit
×1
YOUR NAME
EX-B - External unit
screwspower supply
×1 ×4
1209/8 - BUS Power supply
EX-9000H - Door entry monitor
Technical manual
screwsmonitor + terminal block
metal frame
support
screwsdry wall
anchors
monitor wall
support
×1 ×1 ×4 ×4
×4
×1
×1
×2
screws
×4
×4
clips for dry
lined walls tech sheet
×2
dry wall
anchors
dry wall
anchors
screws
screws
screws tech sheet
tech sheet
external unit
screwspower supply
door entry
monitor wall
support
metal frame
support
clips for dry
lined walls
monitor + terminal blocks screws
Nameplate
for 1 user

EN
5
2. Parts identification
2.1 EX-B EXTERNAL UNIT
1. Hole for wall mounting
2. Terminal block
L L bus line connection
RTE programmable RTE (local lock-release input) or
DO input (door open indication)
GND / SE- RTE and door lock input reference negative
SE+ electric door lock connection
NO relay normally open contact
Crelay common contact
3. Microphone
4. Wide-angle colour camera
5. Camera lighting LED
It can be disabled by setting DIP 7 to ON, see page 26
"4.6.2 Function programming"
6. Nameplate
7. Call button
8. Adjustment trimmer (See page 19)
9. Addressing and programming DIP-switches
10. CNF Programming confirmation button
11. S2 Special programming selector
12. S1 Button programming selector
13. Loudspeaker
14. Fixing screw
3.15 in
5.90 in
1.06
1.14
1.18 in
9.
11.
12.
13.
10.
14.
8.
1. 3.
4.
5.
6.
7.
2.
1.

EN
6
2.2 EX-9000H DOOR ENTRY MONITOR
1. 7” colour LCD screen
2. Microphone
3. S1 Micro-switches for user code setting
4. Terminal block for system connection:
LLBus line connection terminals
- + Power supply terminals
IN2 IN1 Input terminals (programmable)
S- S+ Terminals for additional ringtone output
CFP2 CFP1 Outside door call input
5. S2 Micro-switches for programming keys and functions
DIP 1-2-3-4 for key function programming
DIP 5-6 access to programming
DIP 7 unused
DIP 8: leave default setting (OFF)
6. CV6 (Leave default setting)
7. CV1 CV2 Unused. Leave default setting (mounted)
8. CV5 Jumper for video closure
0.98 in
4.88 in
8.77 in
1. 2.
8.7.6.5.4.3.

EN
7
2.2.1 Capacitive-touch key description
SPEAKER AND AUDIO ACTIVATION KEY / PAGING CALL KEY / HANDS-FREE MODE ACTIVATION KEY
Answer call
Can be used to activate a conversation with the external unit or to end a conversation.
Paging call
Internal paging function: can be used to make a paging call to the internal units with the same user code.
General paging to another user code: can be used to make a paging call to the internal units with another user code.
Hands-Free mode
On receipt of a call the audio will be activated automatically.
LOCK-RELEASE KEY
can be used to activate the lock-release relay
SILENT MODE (PRIVACY) KEY
Silent mode
Can be used to enable or to disable the ringtone for calls from the external unit and paging.
[programmable]
ACTUATOR KEY [programmable]
Generic actuator function: can be used to activate the relay for a generic actuator installed within the system.
Coded actuator function: can be used to activate the relay for a specific actuator installed within the system.
AUTOMATIC LOCK-RELEASE (DOCTOR MODE) [programmable]
can be used to enable automatic activation of the lock-release in response to a call from the external unit.
[programmable]
SELF ACTIVATION [programmable]
Can be used to receive images from the main external unit cameras (press the key again to cycle through several external unit
Audio volume key
Ringtone volume key
Value 'Up/Down' key
Contrast key
Brightness key
2.2.2 Indicator LED description
FLASHING LED: incoming call
STEADY LED (WITH CALL): In communication
STEADY LED (IDLE): Hands-Free mode enabled
FLASHING LED: Incoming call
FLASHING LED (SLOWLY): door open
1 FLASH AFTER PRESSING: confirm lock-release
4 FLASH AFTER PROG.: programming successful
10 FLASHES = programming error
STEADY LED: Privacy mode active
OFF AND FLASHING LED (3 every 5 s.): Automatic lock-release (Doctor mode) active
SLOW FLASHING: programming
4 FLASHES: device engaged
See page 31 "5. System function"

EN
8
3.55 in
1.42 in 2.28 in
1. 2.
3.
3.5
1. 2.
3.
4.
2.3 1209/8 BUS POWER SUPPLY
1. L1 | L1 door entry monitor connection 1
L2 | L2 door entry monitor connection 2
L3 | L3 door entry monitor connection 3
L4 | L4 door entry monitor connection 4
L5 | L5 door entry monitor connection 5
L6 | L6 door entry monitor connection 6
L7 | L7 door entry monitor connection 7
L8 | L8 door entry monitor connection 8
2. Video closing jumpers
REMOVE WHEN LINE IS USED
3. LP LP external unit connection
4. L N mains power input 110-240 V~
2.4 PARTS IDENTIFICATION FOR EXPANSION
ADDITIONAL INTERNAL UNIT
EX-9000H
EX-9000H
The Art. EX-9000H is the Additional Internal Unit for Single-
User Kits (see page 6for further information)
ADDITIONAL EXTERNAL UNIT
EX-BSB
+
1405EX-B
The Art. EX-BSB is the Additional External Unit for Single-User
Kits and contains the external unit Art. EX-B (see page 5for
further information) and the Video Door Expander Art. 1405 (see
paragraph "2.4.1 1405 Video splitter"for further information)
1. LM LM Art. 1209/8 connection
2. LS | LS additional external unit connection
LP | LP main external unit connection
2.4.1 Video Door Expander 1405
5.51 in 2.6 in
4.92 in

EN
9
3.1.1 Single-User Kit art. HFX-9500M
3. System installation
Wire Assignment Wire Assignment Wire Type Amax. Bmax. Cmax.
SINGLE PAIR
CABLE
CAT5
24AWG 557,74 feet
(170 m)
278,87 feet
(85 m)
278,87 feet
(85 m)
DOUBLE PAIR
CABLE
CAT5
24AWG 656,16 feet
(200 m)
328,08 feet
(100 m)
328,08 feet
(100 m)
MULTI PAIR
CABLE
FOLLOW THE COLORS
SHOWN IN THE DIAGRAM!
GREEN
ORANGE
BLU
GREEN / WHITE
ORANGE / WHITE
BLU / WHITE
BROWN / WHITE
BROWN
CAT5
24AWG 1.115,48 feet
(340 m)
557,74 feet
(170 m)
557,74 feet
(170 m)
NON-BRAIDED
CABLE AWG22 787,40 feet
(240 m)
393,70 feet
(120 m)
393,70 feet
(120 m)
NON-BRAIDED
CABLE AWG18 787,40 feet
(240 m)
393,70 feet
(120 m)
393,70 feet
(120 m)
3.1 OPERATING DISTANCES AND SYSTEM LAYOUT
NOTE: This system is capable to expanding up to 4 external units and 8 internal
units. For alternative application please consult our technical support engineer
first.
At the first connection on the riser, the internal units automatically acquire theirs
sub-addresses.
The LEDs and flash simultaneously for some seconds. After the procedure
the LEDs will turn off.
The EX-BSB is the Additional External Unit for Single-User Kits and contains the
external unit EX-B and the Video Door Expander 1405
A
B
C
1209/8
HFX-9500M
EX-9000H
EX-B
EX-BSB
+
1405EX-B

EN
10
3.1.3 Full system expansion diagram
3.1.2 Maximum expansion monitors in daisy chain connection
A
B
C
1209/8
EX-9000H
expansion
door entry monitor
EX-9000H
expansion
door entry monitor
HFX-9500M
EX-9000H
EX-9000H
expansion
door entry monitor
EX-9000H
expansion
door entry monitor
EX-9000H
expansion
door entry monitor
EX-9000H
expansion
door entry monitor
EX-9000H
expansion
door entry monitor
EX-B
expansion
door entry monitor
expansion
door entry monitor
expansion
door entry monitor
expansion
door entry monitor
expansion
door entry monitor
expansion
door entry monitor
expansion
door entry monitor
Maximum 2 door entry monitors per output
1405 1405
1405
1209/8
A
B
C
HFX-9500M
EX-BSB
expansion external unit
EX-BSB
expansion external unit
EX-BSB
expansion external unit
EX-9000H
expansion
door entry monitor
EX-9000H
expansion
door entry monitor
EX-9000H
EX-9000H
expansion
door entry monitor
EX-9000H
expansion
door entry monitor
EX-9000H
expansion
door entry monitor
EX-9000H
expansion
door entry monitor
EX-9000H
expansion
door entry monitor
EX-B EX-B EX-B EX-B
expansion
door entry monitor
expansion external unit expansion external unit expansion external unit
expansion
door entry monitor expansion door entry monitor expansion door entry monitor expansion door entry monitor expansion door entry monitor expansion door entry monitor

EN
11
Basic single-user kit
STANDARD INSTALLATION
Local lock release button
EX-9000H
S
+
S
-
C
F
P
L L
C
F
P
1
-
+
2
IN
1 2
IN
1209/8
L1 L1 L2 L2
LN
110-240V
LP LP L3 L3 L4 L4 L5 L5 L6 L6 L7 L7 L8 L8
LL
E
T
R
NO
GND
SE-
SE
+
C
EX-B
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
LEAVE DEFAULT SETTINGS

EN
12
Expanded single-user kit
MAXIMUM EXPANSION IN DAISY CHAIN CONNECTION
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
-
HFX-9500M
REMOVE WHEN LINE IS USED
REMOVE CV5 REMOVE CV5
REMOVE CV5 REMOVE CV5
EX-B
S
+
S
-
C
F
P
L L
C
F
P
1
-
+
2
IN
1 2
IN
1209/8
L1 L1 L2 L2
LN
110-240V
LP LP L3 L3 L4 L4 L5 L5 L6 L6 L7 L7 L8 L8
S
+
S
-
C
F
P
L L
C
F
P
1
-
+
2
IN
1 2
INS
+
S
C
F
P
L L
C
F
P
1
-
+
2
IN
1 2
IN
S
+
S
-
C
F
P
L L
C
F
P
1
-
+
2
IN
1 2
IN
S
+
S
-
C
F
P
L L
C
F
P
1
-
+
2
IN
1 2
IN
S
+
S
-
C
F
P
L L
C
F
P
1
-
+
2
IN
1 2
INS
+
S
-
C
F
P
L L
C
F
P
1
-
+
2
IN
1 2
IN
EX-9000H EX-9000H
EX-9000H EX-9000H
EX-9000H EX-9000H
EX-9000H EX-9000H
S
+
S
-
C
F
P
L L
C
F
P
1
-
+
2
IN
1 2
IN
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
LEAVE DEFAULT SETTINGS LEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS
REMOVE CV5 REMOVE CV5
REMOVE CV5REMOVE CV5
CV5
Video Closing Jumper
Video closing jumper
REMOVE WHEN LINE IS USED

EN
13
HFX-9500M
1405
L
M
L
M
L
S
L
S
L
P
L
P
1405
L
M
L
M
L
S
L
S
L
P
L
P
1405
L
M
L
M
L
S
L
S
L
P
L
P
MAXIMUN CABLE LENGHT FOR 1405: 3 feet
EX-9000H
S
+
S
-
C
F
P
L L
C
F
P
1
-
+2IN
1 2
IN
1209/8
L1 L1 L2 L2
LN
110-240V
LP LP L3 L3 L4 L4 L5 L5 L6 L6 L7 L7 L8 L8
EX-9000H
S
+
S
-
C
F
P
L L
C
F
P
1
-
+2IN
1 2
IN
EX-9000H
S
+
S
-
C
F
P
L L
C
F
P
1
-
+2IN
1 2
IN
EX-9000H
S
+
S
-
C
F
P
L L
C
F
P
1
-
+2IN
1 2
IN
EX-9000H
S
+
S
-
C
F
P
L L
C
F
P
1
-
+2IN
1 2
IN
EX-9000H
S
+
S
-
C
F
P
L L
C
F
P
1
-
+2IN
1 2
IN
EX-9000H
S
+
S
-
C
F
P
L L
C
F
P
1
-
+2IN
1 2
IN
EX-9000H
S
+
S
-
C
F
P
L L
C
F
P
1
-
+2IN
1 2
IN
REMOVE WHEN LINE IS USED
THESE DEVICES MUST BE STORED TOGETHER
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
0
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
123
SET THE ADDRESS SET THE ADDRESS SET THE ADDRESS
ON
1 2 3 4 6 75 8
ON
1 2 3 4 6 75 8
ON
1 2 3 4 6 75 8
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
THESE DEVICES MUST BE STORED TOGHETHER
Expanded single-user kit
MAXIMUM EXPANSION
Local lock release button
EXTERNAL UNIT ADDRESSING
CODE DIP 1 DIP 2 DIP 3
0
(default) OFF OFF OFF
ON
1 2 3 4 6 75 8
1ON OFF OFF
ON
1 2 3 4 6 75 8
2OFF ON OFF
ON
1 2 3 4 6 75 8
3OFF OFF ON
ON
1 2 3 4 6 75 8
The addresses must be consecutive! correct: 0,1,2,3 / incorrect: 0,1,3
LEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS LEAVE DEFAULT SETTINGSLEAVE DEFAULT SETTINGSLEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGSLEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS SET THE ADDRESS SET THE ADDRESS SET THE ADDRESS
REMOVE WHEN LINE IS USED
THESE DEVICES MUST BE STORED TOGHETHER
MAXIMUM CABLE LENGHT FOR 1405: 3 feet
EX-BSB
+
1405EX-B

EN
14
For further information, see page 28 "4.7 Actuator relay module Art. 1256"
Local lock release button
Basic single-user kit
ADDITIONAL RELAY MODULE (Art. 1256) CONNECTION
C
N
O
CNL L
~
-
~
+
L
OUT
L
IN
L
IN
L
OUT
LM
LM
1214/2C
1256
12/24V
AC/DC
12V~
1200UL
120V~
JP2
2 1
12
JP3
JP4
2
1
110-240V
S
+
S
-
C
F
P
L L
C
F
P
1
-
+
2
IN
1 2
IN
1209/8
L1 L1 L2 L2
LNLP LP L3 L3 L4 L4 L5 L5 L6 L6 L7 L7 L8 L8
EX-9000H
LL
E
T
R
NO
GND
SE-
SE
+
C
EX-B
HFX-9500M
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
LEAVE DEFAULT SETTINGS

EN
15
LL
E
T
R
NO
GND
SE-
SE
+
C
EX-B
HFX-9500M
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
G
N
DA
N
I
3
V S
32
SV
2
S
11
V
+
-
~ ~
LLL
OUT
L
OUT
IN IN
120V~ 12V~
1200UL
110-240V
EX-9000H
S
+
S
-
C
F
P
L L
C
F
P
1
-
+
2
IN
1 2
IN
1209/8
L1 L1 L2 L2
LNLP LP L3 L3 L4 L4 L5 L5 L6 L6 L7 L7 L8 L8
1409
ON
1 2 3 4 6 75 8
Local lock release button
For further information, see page 29 "4.8 CCTV camera interface ART. 1409"
Basic single-user kit
CCTV CAMERA INTERFACE (Art. 1409) CONNECTION
LEAVE DEFAULT SETTINGS

EN
16
63 in
51 in
2
1
2
1
CLICK !
2
2
5
8
12
3
1
2
6
1
2
TO OPEN
8.77 in
4.88 in
1
max = 2.8 in
min = 2.6 in
4
1
2
7
3.2 ASSEMBLY ART. EX-9000H INTERNAL UNIT
3.2.1 Surface-mounting (accessory for EX-9000H included)

EN
17
1
2
1
2
2
5
8.03 in
3.97 in
53.15 - 55.11 in
63 - 65 in
3
1
2
6
TO OPEN
8.77 in
4.88 in
1
4
2
1
CLICK !
2
7
3.2.2 Dry-wall mounting (accessory for EX-9000H included)

EN
18
The camera must not be installed in front of light sources, or in places where the filmed subject is against the light. In dim environments, we
recommend additional lighting is provided.
64.96 in
32.28 in
81.10 in
79°
19.68 in
19.68 in
19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in
64.96 in
32.28 in
81.10 in
79°
19.68 in
19.68 in 19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in
64.96 in
32.28 in
81.10 in
79°
19.68 in 19.68 in
19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in
64.96 in
32.28 in
81.10 in
79°
19.68 in 19.68 in 19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in
CLACK
2
1
5A
3 4
3.3 INSTALLATION OF EXTERNAL UNIT ART. EX-B

EN
19
6
REMOVE TERMINAL IF YOU NEEDED
1.
2.
3.
5B
JOHN DOE
1.
2.
JOHN DOE
7 8
ADJUST IF NEEDED
DO NOT
CHANGE
Microphone
DO NOT
CHANGE
Loudspeaker
JOHN DOE
9

EN
20
13
4
2
5
CLACK
JOHN DOE
JOHN DOE
1 3 4
JOHN DOE
2
3.3.1 How to change the nameplate of the external unit art. EX-B
FAM. SMITH
1.
2.
FAM. SMITH
5 6
3.4 SURFACE-MOUNTING OF THE POWER SUPPLY ART. 1209/8