Pairing (via menu)
1. Choose Communication - Pair
2. Select Receive info on one unit. Ready to receive pairing info is shown in
the display.
3. Select New code on the other unit; select Yes.
4. Generate new code and send info? is shown in the display. Select Yes
(Now both the channel and the coding information have been sent, and
sound transfer is eavesdrop-secure).
5. To pair another unit into your coded system, select Send info instead on
one of your paired units.
Pairing (via pairing button)
(The only way of pairing units without a display, with the pairing button)
You can activate the Pairing function via the pairing button.
1. One brief press of the button opens the
Pairing
menu.
2. Two brief presses activate the Send info function.
3. One long press activates the Receive info function.
Units with both transmitters and receivers built in
Comfort Digisystem units with both transmitters and receivers built-in can be
paired separately.
When opening the pairing menu, choose the concerning unit (transmitter/
receiver). In units with both transmitters and receivers, the pairing button
controls the transmitter.
The transmitter and receiver are paired separately in these units. The code
key is always the same for the transmitter and the receiver when these are
built-in in the same unit.
The easiest way to get the same code key in the whole Digisystem is to
generate a new code key from the combined unit; in that way the built-in
receiver gets the same code as the rest of the system.
Function
Here you can adjust the function button. If no choice has been made, the
microphone sends continuously the sound it takes up.
More settings are possible, see below. The chosen setting shows in the
display. For more information about the function indicator see
More functions
.
