Comfort Glow EF6021R Assembly instructions

Part List
A)Top Panel 1 pc
B)Middle Back Panel 1 pc
C)Middle Panel 1 pc
D)Left&Right Back Panels 2pcs
E)Left&Right Panels 2pcs
F)Middle Front Panels 2pcs
G)Left&Right Small Panels 2pcs
H)Left&Right Small Front Panels 2pcs
I)Middle Small Front Panels 1pc
J)Mounting Heater 2pcs
K)Mounting Brackets 2pcs
L)Base Panel 1pc
M)Locking Screws 28pcs
N)Locking Nuts 28pcs
O)KD Screws 9pcs
Step 1Attached 28pcs Locking Screws (M) to The panels(A.B.E.G.L) as show in Fig A
A

Step 2 Put the Left & Right small panels(G) to the base panel(L) and Insert 4Locking Nuts(N) into each of these
holes keeping the screw head (+) facing out to enable tightening with screwdriver.See Fig B,C,D
D
C
B

Step 3 Put the Left&Right Back Panels(D) into the Base Panel(L).SeeFig E
E
Step 4 Put the Middle Panel(C) into the body and Insert 4Locking Nuts(N) into each of these holes keeping the screw
head (+) facing out to enable tightening with screwdriver.See Fig F,G
F

G
Step 5 Put the Middle Front Panels (F)to Left&Right samll panels(G) and Insert 4Locking Nuts(N) into each of
these holes keeping the screw head (+) facing out to enable tightening with screwdriver.Then put the Left
&Right Panels(E) to the Base Panel(G) and Insert 4Locking Nuts(N) into each of these holes keeping the
screw head (+) facing out to enable tightening with screwdriver.See FigH.I,J,K,L
H
I

J
K

L
Step 6 Put the Middle Back Panel(B) to Middle Panel(C) as show on Fig M
M
Step 7.Put the Top Panel(A) to the Left&Right Panels(E) and Insert 4Locking Nuts(N) into each of these
holes keeping the screw head (+) facing out to enable tightening with screwdriver.See Fig N.Q

N
O
Step 8.Connect the Middle Small Front Panel(I) to the Middle Panel(C) by 3 KD Screws as shown on Fig P

P
Step 9.Connect the Left&Right Small Front Panels(H) to the Left&Right samll Panels(G) by 6 KD Screws as
shown on Fig Q
Q
Step 10.Put the insert in place and install the insert to the mantle with 2 Mounting heaters and 2 Mounting Brackets
see Fig R.S

R
S
Step 11. Tighten all KD Screws
.

1/2 Blower/Moter Heater Assembly NDF-100NR/51/81
3Fireplace Cabinet NDF-100NR/37/18/12
4 Electric Wire NDF-100NR/89
5 Switch NDF-100NR/53
6Knob NDF-100NR/78
7 Thermostat NDF-100NR/60
8 Screen NDF-100NR/41
9. Flame Generator Motor/Reflector NDF-100NR/42/43/44/68/69
10 Blub NDF-100NR95/96/97
11. Log sets NDF-100NR/02/03