Commax TP-1L User manual

DOOR PHONE TP-1L
User Manual
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.

2
Your unit is designed so it can be flush mounted on the or used.
unit for an gular of unit view. The model number is located on
below(available). Refer to these numbers whenever you call upon
Model No.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the use to the presence of uninsulated
“
“dangerous Voltage” ”
within the product’s enclose that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the use to the presence of important
accompanying the appliance
1. Introduction
CAUTION : To reduce the risk of electric shock, do not remove cover(or back) no
caution
Risk of electric shock
do not open
user-serviceable part inside refer servicing to qualitied service personnel
operating and maintemance(servicing) instructions in the literature
Serial No.
When flush mounted on the wall, the stand permils you to the
the bottom and record the serial number in the space provided
your COMMAX dealer regarding this product.
2. Overview
Controls and functions
Handset
Call Button
Volume Switch

3
1. Depress the battery lid to open and install 4 standard AA type 1.5V
batteries by connecting the snap-on lead to the battery terminals.
2. When you want to talk with the other party, raise the handset and
press the call button this sends a call tone to the other station.
3. When the bell is ringing, raise the handset and speak with the
4. On completion of the conversation, replace the handset.
NOTE :
1) Can control the sound of bell rings by use volume switch.
the volume switch at “L” position, volume is low but setting at “H”
2) If you don't want to use dry battery, you can use 6V DC adaptor
(over than 200mA) as an alternative.
3) On completion of the conversation, power is automatically cut off
when the handset is replaced in the cradle; always ensure that the
handset is properly located to avoid excessive battery drain.
3. Operation
other party like telephone.
As example, you may setting on
position, volume is higher
4. Connection
5. Wiring
The unit may also be used with 6VDC power supply.
It is required to use Voltage Regulation DC Power
Supply for safety operation.
⇧⇧
AA(UM-3) Size
INTERPHONE BATTERY
⇧
POWER SUPPLY

Printed In Korea / 2016.04.105
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com
6. Specifications
Operating voltage 6V
Output 0.2W at 8Ω
Idling current 10 mA
Maximum current 40 mA
Effective distance 2Km(O.65mm) /1 .25miles(22 AWG)
Dimensions 98(W) x 208(D) x 65(H)mm