Commax DRC-700S User manual

•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
•Thank you for purchasing COMMAXproducts.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for anysafety accidents caused byabnormaloperation of the product.
COMMAX LOBBY PHONE DRC-700S
User Manual
Intelligent Security & Fire Ltd.

2
Part names
①
TFT-LCD Screen
⑦
Security Button
②
Mike
⑧
Call Button
③
RF CARD Receiver
⑨
Program Button
④
Camera
⑩
Speaker
⑤
Dial Button
⑪
LAN
⑥
Electric Key Button
Intelligent Security & Fire Ltd.

3
1. Main Screen Setting
1.1. Main Screen
Skin Theme
Flip Clock
Red Clock
Green Clock
Black Clock
1.2. Status
Icon
Description
Icon
Description
Lan Connection
Registered server status
Display out post lobby
phone
Not Registered server status
Display building lobby
phone
RF-Card Data save status
Intelligent Security & Fire Ltd.

4
2. Security Call
①Push (Security Guard Post) Button
②Push (Call) button
③Call sound is ringing and call Security Guard Post.
④Call Security Guard Post when guard answer call. (Time: 1 min.)
⑤Press “X”button when terminate call.
⑥Security Guard push ‘Open door’button, “Door is open”voice
comment then door is open.
⑦If line is busy, call it later.
Picture1. Call security Guard
※This is to call up the registered guard stations in advance by a
manager
Intelligent Security & Fire Ltd.

5
3. Call house
3.1. Communication call between residence
I. When building number is set in advance:
When building No. already registered to Call Prefix
Picture2. Screen for registering house No.
①Input unit No. to key board.
Ex) Unit 101 input ‘101’
②Push (call) button.
③Ringing call sound and call unit.
④When tenants answer call, calling is on. (Max. time: 1 min)
⑤Press “X”button when terminate call.
⑥Tenant push ‘Open door’button, “Door is open”voice comment
then door is open
Intelligent Security & Fire Ltd.

6
II. When building number is NOT set in advance:
When building number hasn’t been registered Call Prefix yet.
Picture3. Building house No. register screen
①Input Building No. to key board.
Ex) Building 101 input ‘101’
②Input unit No. to key board.
Ex) Unit 101 input ‘101’
③Push (call) button.
④Ringing call sound and call unit.
⑤When tenants answer call, calling is on. (Max. time: 1 min)
⑥Press “X”button when terminate call.
⑦Tenant push ‘Open door’button, “Door is open”voice comment
then door is open
Intelligent Security & Fire Ltd.

7
4. Access authorization
4.1 Opening the entrance with RF card.
①Tag RF card to ‘Card tagging window’.
②The common entrance get be opened with a vocal message, “door
opens”when the access is successful.
③The entrance does not be opened when the access fails with
sound.
Picture4. Tag RF-Card
4.2 Access by PIN No.
I. Building Number designated case:
Building Number designated in Call Prefix
①Input unit No. through key board.
②Push (Key) button.
③Input designated house PIN No.
④Push (call) button.
⑤If access authorization is successful, Door is open with “Door is
open”voice message.
⑥If access is failed, warning sound is activated.
Intelligent Security & Fire Ltd.

8
II. Building Number is not designated case:
Building Number is not designated in Call Prefix
①Input Building No. through key board.
EX) Building 101 Input 101
②Push (call) button.
③Input unit No. through key board.
Ex) Unit 101 Input 101
④Push (call) button.
⑤If access authorization is successful, Door is open with “Door is
open”voice message.
⑥If access is failed, warning sound is activated.
.
Picture5. Input password (PIN)
Intelligent Security & Fire Ltd.

9
4.3. Use password for accessing when system is OFF-Line
(No connection with Local server)
①Push (Key) button.
②Input PIN number.
③Push (call) button.
※This function is not activate when it is On-Line (possible to interface
with local server status).
※Please, should delete OFF-LINE PIN number when On-Line mode is
activated.
Intelligent Security & Fire Ltd.

10
5. Set up
Set up
①Push button.
②Input PIN number.
③Push (call) button.
※We recommend user change initial password (0000) then use products
for security.
※Initialize password: + “0000”+ + + + +
button map
※” “is DOT (.) for IP address typing.
Intelligent Security & Fire Ltd.

11
Set up menu
0: Set Network+
0: IP address: (Input IP address)
1: G/W address (Input Gateway address)
2: DNS address (Input DNS address)
3: Net mask (Input network mask)
1: Set VoIP+
0: SIP Server (Input SIP server address)
1: Guard ID (Input Security Guard Post)
2: Management+
0: Server address (Input Local server address)
1: Update address (Input update server address)
2: System ID (Input DRC-700S serial No.)
3: Call Prefix (Set building)
* If there is no building information in set up, automatically pop up for
building information when call house.
4: Call Line+
0: Min Call Line (Input call Min. line)
1: Max Call Line (Input call Max. line)
* Attention: If Min Call Line is bigger than Max Call Line, you can’t call
it.
5: Position (Set DRC-700S location)
※button is for upper ground, button is for underground.
Ex) when user set first floor after pushing button, “1”is displayed and
pushing button, “B1”is displayed.
※If do not set 1st floor, automatically 1st floor will be set.
Intelligent Security & Fire Ltd.

12
3: Audio/Video+
0: Audio+
0: Guard Spe. Vol. (Control speaker volume when communicate with
house)
1: Guard Mic Vol. (Control Mic. volume when communicate with house)
2: Guard Spe. Vol. (Control speaker volume when communicate with
guard)
3: Guard Mic Vol. (Control Mic. volume when communicate with guard)
4: Key Sound (Select button sound)
5: Ring Sound (Select call sound)
6. Key Vol. (Select button volume)
7. Ring Vol. (Select call volume)
8: Effect Vol.(Select effect volume)
9: Initialization (Initialize audio)
* Initialize all setting value from Audio menu.
1: Video:+
0: Quality (Set visitor video quality)
* Increase to 384K/800K/1M/1.2M order (increase video quality).
However, video data is also increased.
If video quality is not good such as broken video, please, set lower
video quality.
1: Brightness (Control Video Brightness )
2: Contrast (Control Video Contrast)
3: Saturation (Control Video Saturation)
4: Hue (Control Video Hue)
5: Initialization (Initialize Video)
* Initialize all setting value from Video menu.
Intelligent Security & Fire Ltd.

13
4: Extra Config+
0: Language (Select language)
1: Skin Theme
0: Auto
* Automatically change Skin Theme once a day or after booting.
1: Flip Clock
* Set up Skin Theme to Flip Clock Type.
2: Red Clock
* Set up Skin Theme to Red Clock Typ.
3: Green Clock
* Set up Skin Theme to Green Clock Type.
4: Black Clock
* Set up Skin Theme to Black Clock Type.
2: Set Time+
0: Door Open Time (Gate Open time)
* Select between 2sec., 5sec., 10sec., 15sec., 20sec., 25sec.
1: Sleep Mode Time (LCD Sleep Mode setting)
* Select between 30sec, 1 min. 2 min. 3min, 4min, 5min
2: Key Time Out
* Select between 10 sec, 20 sec, 30 sec
3: ADC Sensor (Change approach sensor and range.)
* Range should be small when face to direct sun-ray.
0:[ ] 0.2V
1:[ ] 0.3V
2:[ ] 0.4V
3:[ ] Unused
4: Change Password
* Push button for deleting previous password.
Intelligent Security & Fire Ltd.

14
5: Off-Line Password (In put Off-Line password)
* Push button for deleting previous password.
* Initial Off-Line password is “123456”.
6: Reboot: (System rebooting)
7: System Reset (Initialize all setting and back to factory setting)
* Do not initialize IP after changing IP address.
5: Database+
0: Password Down. (Download house password)
1: RF-Card Down. (Download RF-Card Data)
2: Password Del. (Delete house password)
3: RF-Card Del. (Delete RF-Card Datas)
6: System Info+
0: Version (Show software version)
1: Boot (Display boot loader information)
2: Kernel (Display OS information)
7: Test+
0: Test Door Open
1: Test RF Card (Display RF card No.)
* This function is for checking RF Card number.
* Tag card to card reader when Reading status.
2: Test Elevator (Test elevator call)
3: Test Sensor (Display sensor value.)
4: System Initialize
Intelligent Security & Fire Ltd.

15
6. Wiring Diagram
※Pay attention to check polarity when install lobby panel.
Intelligent Security & Fire Ltd.

Memo
Intelligent Security & Fire Ltd.

Memo
Intelligent Security & Fire Ltd.

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. :[phone]~550 Fax. :[phone]
Web site : www.commax.com
Printed In Korea / 2013.08.104
PM10700S0010
Intelligent Security & Fire Ltd.