Component Solution Services Verity SM04 User manual

A division of
Component Solution Services, LLC.
56600 Twin Branch Dr.,
Mishawaka, IN 46545
www.verityrvs.com
Please read this manual completely before operating the SYSTEM
© 2017 Verity Rear Vision Systems
Just View It!
4.3 INCH
MIRROR MONITOR SYSTEM
Clip-on or Post Mount
Part # SM04
®

Component Solution Services LLC., offers the Verity
Rear Vision Systems® to meet any requirements and
price point within the trucking, specialty vehicles, and RV
industry. Verity Rear Vision Systems® is also home to
the Supreme View® line of specialty format systems. Our
standard cabled systems offer unparalleled features into
the trucking and RV industries. Designed for professional
drivers, Verity Rear Vision Systems develops and
markets products and applications to transmit video,
audio, and data either individually or in any and all
combinations. The company has also developed,
manufactured, and marketed different kinds of personal
and vehicle video cameras, DVRs, and accessories for
the commercial transportation, fire/rescue, and marine
OEM markets.
www.VerityRVS.com
© 2019 Verity Rear Vision Systems
Just View It!®

Think Safety
First
Read our manual before operating
or installing.
Most likely, your system came preinstalled so the installation
section would be for reference.
Thank you for your purchase of our Verity Rear Vision
Systems®. When installed and used properly, your monitor is
designed to deliver you years of trouble-free operation. This
manual contains important information required to properly
install and operate the unit. Verity Rear Vision Systems®are
designed for quick installation by trained professionals in
proper installation environments. Our designs are based on
decades of working with vehicle manufacturers.
Verity Rear Vision Systems®products are intended to be
installed as a supplement and our observation systems and/or
products are not intended for use as substitutes for rear-view
mirror devices, or for any other standard motor vehicle
equipment which may be required to be installed on vehicles
by law. Verity Rear Vision Systems®products promote
improving the vehicle operator’s field of view. Our products
are no substitute for proper defensive driving techniques,
observance of traffic laws and motor vehicle safety
regulations.
Installation Location
It is unlawful in most locals for any person to drive a motor
vehicle equipped with a television viewer/screen located at
any point forward of the back of the driver’s seat (or in any
location that is visible, directly or indirectly), to the driver while
operating the vehicle. Our systems are designed to be used
primarily as a rear observation device.
DO NOT OPEN ANY COMPONENT. There are no
serviceable parts inside any of the components of the Verity
Rear Vision Systems®products. Opening the product will
break the tamper indicators and void the warranty. Contact
our tech support if a problem should arise 574-807-6002. For
faster response, fill out a service ticket found on our website
tech support section. www.verityrvs.com

WARNING
Do not place heavy objects on cables or cover
them with carpet or mats.
Do not place cables where they can be
crushed in any manner.
Our systems are designed as a driving aid.
Watching videos, broadcasts, DVDs and/or any
images other than intended driving assistance
cameras is prohibited.
CAUTION
To avoid damage to the electronic circuit, stop
using this product while doing welding work to
the vehicle and/or trailers.
Never immerse any component in water, and
do not employ spray cleaners. When cleaning,
use a damp lint-free cloth only.
Connect this unit only to other compatible
devices.
Although our products have built-in surge and
cross polarity protection, make sure all cables
are connected properly; improper cable
connections may damage the camera and the
monitor.
Cables should not be allowed to touch hot or
rotating parts, such as the engine, ventilator,
etc.
Do not locate the monitor near heat generating
vents or devices.
Turn off power to the monitor when connecting
the camera.
Monitors are not designed to be waterproof. (Our
SM07F waterproof monitor is the exception.)
Exposure to water, such as rain, may damage the
unit.

SYSTEM FEATURES
MIRROR MONITOR SPECIFICATIONS
4.3"digital panel rear view mirror monitor
System: NTSC
2 labeled AV inputs
AV 2 can be triggered
Brightness:500
Contrast ratio: 400:1
Power voltage: DC12-24V
Operating temperature: -20~70 deg
Storage temperature: -30~80 deg
Combines normal/mirror image
Special anti-glaring treatment
This monitor fits 70%-80% of GM, Ford, and Toyota
vehicle’s windshield clips
Simple operation
Auto dimming
CAMERA SPECIFICATIONS
Aluminum housing
CCD Camera, 2.9mm lens
Waterproof IP 69
6 IR Night vision
System: NTSC
Pixel: 628 X 582 RGB
View Arrange: 120°

SYSTEM COMPONENTS
65 foot
Camera Cable
Monitor Cable
Manual
4.3 -Inch Mirror Monitor
120oCamera
Mounting Slug

All in .mm
Subject to change.

SYSTEM COMPONENTS
This monitor can be mounted in place of the rear-view
mirror. Make sure the view is suitable to the driver to
observe the images. Take care not to block any
necessary viewing area when mounting. Before
mounting the system, permanently hook up all
connections to ensure proper operation. This monitor
can also be clipped over and existing mirror monitor
Mounting Monitor
1. Carefully detach the original rear view mirror in
the vehicle. Leave the original mounting slug on the
windshield.
2. Slide the new monitor bracket over the existing
mount point on the windshield. If there is a problem
with compatibility, a new mounting slug has been
provided that will fit the monitor bracket. Glue the flat
side of the slug to the windshield with the narrow end
pointing up. Slide the monitor bracket over the new
mount point, and tighten the set screw in the mount
until snug. Do not overtighten.
3. Connect one end of the power cable (wire) to the
proper connections. Connect the other end of the
power cable (plug) to the monitor; connect the monitor
and the camera with the system connecting cable.
Post Bracket
or Clip-on

CONNECTION OPERATIONS
20M Male/Female
Camera Extension
Cable
CAM 1
Verity Rear Vision Systems Wire Connection Key
4-pin camera connectors & trigger wires
Camera 2 (Green trigger wire
Red wire to key-on hot (+) 12-32v. DC (fused)
Black wire to GND. (-)
Green wire to positive back-up light
BE SURE TO ALIGN MONITOR CABLE CONNECTION
If force is applied to this connection when not aligned, it
may damage plug pins and void the warranty.
CAM 2
Fuse

MENU OPERATIONS
Menu:
BRIGHTNESS
Use DOWN / UP arrows to adjust brightness
CONTRAST
Use DOWN / UP arrows to adjust contrast
COLOR
Use DOWN / UP arrows to adjust color
RESET
Restores all perset factory settings
CONTRAST 50
llllllllllllllllllll-------------
BRIGHT 50
llllllllllllllllllll-------------
COLOR 50
llllllllllllllllllll-------------

Verity Rear Vision Systems
A division of
COMPONENT SOLUTION SERVICES (CSS)
LIMITED ONE (1) YEAR WARRANTY
1. CSS products’ warranties are not transferable. The warranties
apply to the retail consumer for one (1) year and covers against
defects in material and workmanship.
2. Defective components will be replaced or repaired, based on a
CSS evaluation of the component. In-bound shipping charges, based
on the CSS rate allocated in the RMA (returned merchandise
agreement), will be covered once the component has been deemed
defective at the CSS warranty facility. The pre-assigned in-bound
freight will be supplied upon return of product. All repaired/replaced
warranty parts shall be for the remaining duration of the original
warranty time period.
3. CSS takes pride in our products and will aid in the processing of
your components:
a) All warranty claimants must have consulted our technical support
department for trouble shooting and the acquiring of an RMA.
Contact can be made via email at [email protected] or call 574-
807-6002.
b) When the warranty claim is made, the consumer must establish the
warranty start dates by presenting documentation regarding the date
of retail purchase (e.g., bill of sale). c) Service performed by non-
authorized service personnel may void all warranty claims.
d) CSS will make no payments for system removal / system re-
installing, mileage allowance, or transportation expenses.
The limited warranty does not cover damage resulting from misuse,
accident, modification or alteration to hardware or software,
tampering, unsuitable physical or operating environment beyond
product specifications, improper maintenance, or failure caused by a
product for which CSS is not responsible. There is no warranty for
any product with removed or altered identification labels. CSS DOES
NOT PROVIDE ANY OTHER WARRANTIES OF ANY KIND,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. SOME JURISDICTIONS DO NOT ALLOW
THE LIMITATION OF IMPLIED WARRANTIES, SO THIS
LIMITATION MAY NOT APPLY TO YOU.
4. This warranty gives you specific legal rights, and you may also
have other rights that vary from state to state.

Technical Support
A service ticket can be filled out online to supply the
quickest service. The service ticket can be easily found
on our web site www.verityrvs.com or use the code to the
right. Please have the serial number of
the system which is found on the back of
the monitor when contacting the service
department. We take great pride in
delivering the most dependable product
in the industry. Each item was 100%
QC tested and then we randomly
recheck another up to 10% before it leaves our hands to
you.
Email Tech Support: [email protected]
Phone Tech Support: 574-807-6002
Note: if you are a fire/rescue customer in need of tech
support after hours or on weekends, leave a message and
a technician will return your call as soon as one becomes
available.
a division of
Component Solution Services
56600 Twin Branch Drive
Mishawaka, IN 46545
574-807-6002
Toll Free 844-875-4799
We at Verity Rear Vision Systems would like to
personally thank you for purchasing our product. Our
company strives to supply the best products at a fair
price. We care that you enjoy a safe driving experience.
© 2019 Verity Rear Vision Systems