COMPX Regulator AT User manual

, Keyless Locking 8
Rev. A 11/16
PN:
334001000000
, Keyless Locking 1
Instruction Manual

, Keyless Locking 2
Thank you for purchasing the CompX ® . The is
an innovative solution for locking cabinet doors and drawers. With (3) cylinder
lengths from which to choose, it can be installed on cabinet doors or drawers
with a material thickness from 1/32” to 1-7/16”. Powered by 2-AAA batteries
(included), operates using a 4 to 8 digit code.
All user programming must be done using the RegulatoR -Active Track
Excel spreadsheet. See http://compx.com/regulator/activetrack
•Minimum System Requirement
oWindows7 – Excel 2007
•USB cable required (not included) for connection to spreadsheet
•is intended for interior use only
•Operating Temperature: 50°F – 120°F (10°C – 48°C)
Packaged Components
CompX ® is offered in two versions: manual lock and self-
locking featuring SlamCAM. The contents of the box will vary depending on
the version.
Contents – Manual Lock Version:
•Manual lock Lock assembly
•(2) AAA alkaline batteries
•(1) Offset locking cam & (1) Straight locking cam
•FlexaCam adapters
•Mounting hardware
, Keyless Locking 7
SlamCAM spacer discs (if so equipped) can be inserted between the lock barrel
and SlamCAM mechanism to adjust the backset. See image below:
FlexaCam adaptors (if so equipped) can be attached to the cam to provide up to
12 different dimensional variations. See image below:

, Keyless Locking 6
Part Number Descriptions
Example: REG-AT-S-L-3-BK
REG-AT = RegulatoR Standard Knob w/audit trail
REGS-AT = RegulatoR Short Knob w/audit trail
Version:
S= Self-locking; featuring SlamCAM
M= Manual locking, standard CompX National cams
Mounting:
L= Left hand mount, door application - hinge on left side when facing cabinet
R= Right hand mount door application - hinge on right side when facing cabinet
V= Vertical mount door application (keypad located above locking point)
T= Top vertical mount door application (keypad located below locking point)
Cylinder Length:
1= 7/16" cylinder length
3= 1-3/16" cylinder length
5= 1-3/4" cylinder length
Color:
BK = Matte black housing & knob
No suffix = Standard silver housing & knob
-------------------------------------------------------------------------------------------------
Replacement Parts
REG-KIT-KNOB - replacement knob kit
REG-KIT-KNOBS - replacement short knob kit
213005000000J - replacement battery door
, Keyless Locking 3
Packaged Components cont.
Contents – Self-Lock Version:
•Self-locking Lock assembly featuring
SlamCAM
•(2) AAA alkaline batteries
•SlamCAM spacer discs
•Mounting hardware
Powering Up and Battery Installation
CompX ® is shipped with two installed AAA batteries. While
features a low battery indicator, scheduled battery replacement is
recommended. Mixing batteries of different chemistries could damage the
resulting in lock failure.
To power up , pull the red tag. The lock is now ready for use.
Note: In the event the batteries should die, they can be replaced via the external
battery compartment.
If equipped, a tamper resistant T-15 pin-in Torx ® (6-lobe) bit or driver (not
included) will be required to remove the battery cover.
Restoring Factory Codes
The RegulatoR -AT features a factory reset code which will restore the default
1-2-3-4 & 1-2-3-4-5 codes. The was shipped with reset stickers;
one attached to the back of the and an extra sticker that should
be kept in a safe and secure location for future reference if needed.
To restore the factory default codes, type the Factory Reset Code assigned to the
and press and hold ENTER for 3 seconds.
Care and Cleaning
To clean the surface, apply non-acid based cleaner to a clean
cotton cloth; do not spray cleaner directly on the . Wipe down
keypad and its respective housing surfaces of excess cleaner.

, Keyless Locking 4
Operating the with Self-locking
CompX
® is offered with self-locking featuring SlamCAM. If
your lock is the self -locking version, follow the directions below to unlock and
lock the :
To operate the standard self-locking version:
Type a valid code, press ENTER and rotate knob clockwise 90°, hold knob until
door or drawer is open then release the knob. knob will
automatically return to the locked position and the door or drawer can be closed
at any time.
, Keyless Locking 5
Operating the with Manual locking
CompX
® is also offered in a manual locking version. If your
lock is the manual locking version, follow the directions below to unlock and
lock the .
To operate the standard manual locking version:
Type a valid code, press ENTER and rotate knob clockwise 90°. To lock, close
the door or drawer and rotate knob 90° counterclockwise.

, Keyless Locking 4
Operating the with Self-locking
CompX
® is offered with self-locking featuring SlamCAM. If
your lock is the self -locking version, follow the directions below to unlock and
lock the :
To operate the standard self-locking version:
Type a valid code, press ENTER and rotate knob clockwise 90°, hold knob until
door or drawer is open then release the knob. knob will
automatically return to the locked position and the door or drawer can be closed
at any time.
, Keyless Locking 5
Operating the with Manual locking
CompX
® is also offered in a manual locking version. If your
lock is the manual locking version, follow the directions below to unlock and
lock the .
To operate the standard manual locking version:
Type a valid code, press ENTER and rotate knob clockwise 90°. To lock, close
the door or drawer and rotate knob 90° counterclockwise.

, Keyless Locking 6
Part Number Descriptions
Example: REG-AT-S-L-3-BK
REG-AT = RegulatoR Standard Knob w/audit trail
REGS-AT = RegulatoR Short Knob w/audit trail
Version:
S= Self-locking; featuring SlamCAM
M= Manual locking, standard CompX National cams
Mounting:
L= Left hand mount, door application - hinge on left side when facing cabinet
R= Right hand mount door application - hinge on right side when facing cabinet
V= Vertical mount door application (keypad located above locking point)
T= Top vertical mount door application (keypad located below locking point)
Cylinder Length:
1= 7/16" cylinder length
3= 1-3/16" cylinder length
5= 1-3/4" cylinder length
Color:
BK = Matte black housing & knob
No suffix = Standard silver housing & knob
-------------------------------------------------------------------------------------------------
Replacement Parts
REG-KIT-KNOB - replacement knob kit
REG-KIT-KNOBS - replacement short knob kit
213005000000J - replacement battery door
, Keyless Locking 3
Packaged Components cont.
Contents – Self-Lock Version:
•Self-locking Lock assembly featuring
SlamCAM
•(2) AAA alkaline batteries
•SlamCAM spacer discs
•Mounting hardware
Powering Up and Battery Installation
CompX ® is shipped with two installed AAA batteries. While
features a low battery indicator, scheduled battery replacement is
recommended. Mixing batteries of different chemistries could damage the
resulting in lock failure.
To power up , pull the red tag. The lock is now ready for use.
Note: In the event the batteries should die, they can be replaced via the external
battery compartment.
If equipped, a tamper resistant T-15 pin-in Torx ® (6-lobe) bit or driver (not
included) will be required to remove the battery cover.
Restoring Factory Codes
The RegulatoR -AT features a factory reset code which will restore the default
1-2-3-4 & 1-2-3-4-5 codes. The was shipped with reset stickers;
one attached to the back of the and an extra sticker that should
be kept in a safe and secure location for future reference if needed.
To restore the factory default codes, type the Factory Reset Code assigned to the
and press and hold ENTER for 3 seconds.
Care and Cleaning
To clean the surface, apply non-acid based cleaner to a clean
cotton cloth; do not spray cleaner directly on the . Wipe down
keypad and its respective housing surfaces of excess cleaner.

, Keyless Locking 2
Thank you for purchasing the CompX ® . The is
an innovative solution for locking cabinet doors and drawers. With (3) cylinder
lengths from which to choose, it can be installed on cabinet doors or drawers
with a material thickness from 1/32” to 1-7/16”. Powered by 2-AAA batteries
(included), operates using a 4 to 8 digit code.
All user programming must be done using the RegulatoR -Active Track
Excel spreadsheet. See http://compx.com/regulator/activetrack
•Minimum System Requirement
oWindows7 – Excel 2007
•USB cable required (not included) for connection to spreadsheet
•is intended for interior use only
•Operating Temperature: 50°F – 120°F (10°C – 48°C)
Packaged Components
CompX ® is offered in two versions: manual lock and self-
locking featuring SlamCAM. The contents of the box will vary depending on
the version.
Contents – Manual Lock Version:
•Manual lock Lock assembly
•(2) AAA alkaline batteries
•(1) Offset locking cam & (1) Straight locking cam
•FlexaCam adapters
•Mounting hardware
, Keyless Locking 7
SlamCAM spacer discs (if so equipped) can be inserted between the lock barrel
and SlamCAM mechanism to adjust the backset. See image below:
FlexaCam adaptors (if so equipped) can be attached to the cam to provide up to
12 different dimensional variations. See image below:

, Keyless Locking 8
Rev. A 11/16
PN:
334001000000
, Keyless Locking 1
Instruction Manual