COMPX TuBAR DWC-ORD-1 User manual

1
TuBAR®Retrofit for
Dresser Wayne
Ovation Receipt Door
Copyright © 2009 CompX Security Products. Any companies and/or products referred to herein are marks or registered trademarks of their respective companies owners and/or mark holders.

2
TuBAR®Receipt Door
Retrofit: Ovation
Part # DWC-ORD-1
A.TuBAR®Lock
B.Gasket
C.Cam Adapter
D.Cam
E.Cam Nut
F.Drill & Mounting
Template
G.Lock Washer
H.Cylinder Nut
D
E
A
G
B
F
C
H

3
TuBAR®Receipt Door
Retrofit: Ovation
Part # DWC-ORD-1
1. Use Drill Template (F) to drill Ø3/16” pilot
hole in Door by placing template in upper
corner of receipt door interior. Align template
against door frame with rounded corners
positioned as shown.
F

4
TuBAR®Receipt Door
Retrofit: Ovation
Part # DWC-ORD-1
2. Drill Ø3/4” hole through pilot hole.

5
TuBAR®Receipt Door
Retrofit: Ovation
Part # DWC-ORD-1
3. Install Lock A through Gasket B
and into Ø3/4 hole in door.
Orientation mark on lock face to
left.
A B

6
TuBAR®Receipt Door
Retrofit: Ovation
Part # DWC-ORD-1
4. Install Mounting Plate F and
Retaining Washer G over Lock and
secure with Cylinder Nut H
F H
Mounting Plate is required to
prevent entire Lock from rotating
G

7
TuBAR®Receipt Door
Retrofit: Ovation
Part # DWC-ORD-1
5. Install Cam Adapter C, Cam
D, and Cam Nut E on back of
Lock C D E

8
TuBAR®Receipt Door
Retrofit: Ovation
Part # DWC-ORD-1
6. Optional –Remove or
reposition cam on existing lock
to disable. Leave lock in place
to fill hole.