Conair VSX-519V-K Installation instructions

USE AND CARE
Congratulations on your purchase of the Obus Forme®by Conair™Gel Seat.
The Obus Forme Gel Seat combines the luxurious comfort of gel with con-
toured support for comfort in any seat, anywhere you go.
ABOUT YOUR OBUS FORME®BY CONAIR™
GEL SEAT
The ergonomically contoured pommel shape of the Obus
Forme®by Conair™Gel Seat helps to support you in
proper, upright posture. A gel insert is set into a molded
foam base so that the Obus Forme®by Conair™Gel
Seat conforms to your body for a personalized fit, and
helps to reduce pressure on sitting bones. Its base is
composed of polyurethane foam that is molded into a
contoured shape to provide you with additional comfort.
The gel grid is designed to provide different zones of
comfort and support for a luxurious sitting experience:
Zone 1: Dense gel provides firm support at the front and
back of your seat to help you sit upright.
Zone 2: Softer gel in the center and throughout the
remainder of the seat provides a cushioning
effect to help soothe aching sitting bones.
The Obus Forme®by Conair™Gel Seat cover is designed with a mesh interior
to allow for increased air circulation.
HOW TO USE YOUR OBUS FORME®BY CONAIR™
GEL SEAT
Lightweight and portable, your Obus Forme Gel Seat is ideal for use anywhere
you sit – at home, in the office and on the go!
CAUTION! This product may not be suitable for use in all vehicles, or while
driving. Please refer to your vehicle’s owner’s manual for important safety
guidelines if you are planning to use this product in your vehicle.
USE AND CARE TIPS
The Obus Forme Gel Seat is made with synthetic materials. If the surface of
your cushion becomes soiled, it can be wiped gently with a damp cloth, mild
soap and a sponge, or a soft brush. Do not rub the cushion excessively or
place it in a washing machine. Avoid soaking the cushion as this may damage
the material. To dry, pat with a clean, dry cloth.
MATERIALS
Exterior: 100% polyester
Interior: Molded foam base is 100% polyurethane foam;
gel grid is 100% Styrene Ethylene Butylenes Styrene Copolymer.
Product complies with all U.S. and Canadian regulations regarding flammability.

LIMITED ONE YEAR WARRANTY
Conair will repair or replace (at our option) your unit free of charge for 12 months from the date
of purchase if the appliance is defective in workmanship or materials.
To obtain service under this warranty, return the defective product to the service center
listed below, together with your purchase receipt and $10.00 for postage and handling.
California residents need only provide proof of purchase and should call 1-800-366-0937
for shipping instructions. In the absence of a purchase receipt, the warranty period shall be
12 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING
BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 12-MONTH DURATION OF THIS WRITTEN, LIMITED
WARRANTY. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow
the exclusion or limitation of special, incidental, or consequential damages, so the
above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights,
which vary from state to state.
For information on any Conair product call: 1-800-3-CONAIR
or visit us on the web at: www.conair.com
©2007 Conair Corporation
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
07NP230 IB-7621
GSE1
INSTRUCTION BOOKLET
FOR MODEL GSE1
For your safety and continued enjoyment of this product,
always read the instruction book carefully before using.