Conceptronic C8CHCCTVKIT User manual

8-Channel CCTV Surveillance Kit
User Manual
C8CHCCTVKIT
V2.0

i
CONTENTS
Chapter one Products Introduce................................... 4
1.1 Technical Parameter ..........................................................4
1.2 Product overview................................................................4
1.3 Key Features......................................................................4
Chapter Two Hardware............................................... 5
2.1 H.264 standalone DVR.......................................................5
Chapter Three Operation ............................................ 8
3.1 Operation instruction ..........................................................8
3.2 Power On............................................................................9
3.3 Shutdown..........................................................................10
3.4 Multi Channel....................................................................11
3.5 Preview.............................................................................11
3.6 Recording operation.......................................................11
3.7 Playback video .................................................................12
3.8 How to control PTZ...........................................................13
3.9 Alarm control ....................................................................14
3.10 Display Adjust.................................................................14
Chapter Four Menu Operation Guide ........................... 16
4.1 Recording Setup...............................................................16
4.2 Camera.............................................................................17

ii
4.3 Network Setup..................................................................19
4.4 System Setup...................................................................22
4.5 System Management........................................................24
Chapter Five IE Preview............................................ 26
5.1 logging on interface.......................................................26
5.2 System Settings................................................................27
5.3 Status control....................................................................28
Chapter Six QMEYE phone software for use................ 30
6.1 Instructions of Android......................................................30
6.2 Instructions of IPhone.......................................................42
Chapter Seven FAQ (Frequently Asked Questions) ......... 53

3
Power
This DVR adaptor is DC12V; please make sure the power supply voltage before turn on the machine.
If long time do not use the machine, please turn off the power of DVR machine, and let the electric plug away from power socket;
2. safety
This DVR only for indoor use, as for prevent short circuit or electric danger, please do not let the DVR in the raining or humid area.
In case any solid or liquid inside the case of DVR, please turn off the power immediately, and ask the qualified technician check it before reboot the DVR;
The DVR is the precision machine, there is nothing for repair by customers themselves in it, when it break down, please ask the qualified technician to
check and repair, or contact with the agents of it.
3. Installation
Please keep the DVR in level for installation;
Pay attention to equipment ground;
For the first time to install the DVR, please make sure if the hard disk drive install or not;
Prevent to open the case and change the hard disk drive in electrified;
Propose to select the performance of hard disk drive will be 7200 rotating speed person second;
Please select the appropriate installation site, so let the air can be free flow inside the DVR, prevent the machine overheating;
Please do not install the DVR nearby the radiator, air chute etc. heat source,
or where the direct sunlight, too much dust, or mechanical vibration or attack;

4
Chapter one Products Introduce
1.1 Technical Parameter
Compression standard
H.264 baseline profil[email protected]
Video input
Composite 1.0Vp-p/75Ω, BNC×8
Video output
Composite 1.0Vp-p/75Ω,BNC×1, VGA×1
Resolution
Preview D1 704×576（PAL）， 720×480（NTSC）
Recording D1 704×576（PAL）， 720×480（NTSC）
CIF 352×288（PAL）， 320×240（NTSC）
Frame rate
Preview/ recording
8ch 200fps(PAL), 240fps(NTSC)
Audio input
-8dB~22k,RCAx4(8ch)
Audio output
-8dB~92dB,RCAx1
Audio decode
ADPCM
Alarm input
4ch input
Alarm output
1ch output
Recording mode
Manual recording, timing recording , motion detection recording and external
alarm recording
Simplex/duplex/ triplex
triplex(recording, playback , LAN transmission)
LAN
RJ45(10M/100M self-adapting)
PTZ control
Yes
Communication
RS485×1，USB2.0×2
USB
USB mouse control
Hard disk drive
1
Remote control unit
Yes
Dimension
Main board size : 220mm x 112mm
Power supply
AC110-230V
1.2 Product overview
The Conceptronic CCTV Surveillance Kit offers an ideal way to securely monitor a house or business. With four
cameras focused on different areas, all access points to the front, rear and sides of the property will be
covered. All eight channels can easily be monitored from any PC, laptop, tablet or smartphone using the free
software provided. Cameras all conform to Weatherproof standard IP65, and operate in temperatures from
-10°C to 50°C. Built-in infrared LEDs support night monitoring for distances up to 15 metres, providing
peace-of-mind twenty-four hours a day. The quality cameras also offer full-screen, high resolution recording
and playback, and recording your data is made easy and efficient with a high compression rate and up to 2 TB
of disk capacity. Everything you need for safe, secure surveillance of your home or business.
1.3 Key Features
4 x 1/4'' CMOS 600TVL Day/Night Outdoor Cameras with an 8-CH Digital Video Recorder included
One 2.5”/3.5" disk slot supports storage capacity of up to 2TB
Built-in infrared LEDs for night viewing up to 15m
Weatherproof IP65-rated
Wide operating temperature range (-10°C to 50°C)
D1 real time, full screen, high resolution recording
H.264 compression for efficient data transfer and storage
Built-in USB port for backup, firmware upgrade and mouse
Supports VGA, HDMI output
Supports iPhone/Android/Blackberry remote viewing over the Internet

5
Chapter Two Hardware
2.1 H.264 standalone DVR
2.1.1 Hard disk Installation
For the first use, please install the hard disk
○
1Remove the screws on both ○ 2extracted from the next cover up ○ 3connect the data wire
○
4connect the power wire ○ 5fix the screw of the hard disk ○ 6fix the screw of the hard disk
⑦close cover ⑧fix the cover
2.1.2 Rear panel and Front panel of DVR
Front panel

6
Rear panel
Item
Interface
Description
1
VIDEO IN
8ch video input
2
AUDIO IN
8ch audio input
3
V-OUT
1ch video output
4
A-OUT
1ch audio output
5
VGA
VGA monitor
６
HD-OUT
HDMI interface
７
NETWORK
RJ45
８
USB
First USB for backup or upgrade system of DVR; Second
USB for mouse
９
ON/OFF
Power supply switcher
１０
DC-12V
Power adaptor port
１１
ALARM IN：IN1-IN4 alarm input port
RS-485：A , B
ALARM OUT: N1 alarm output port, every channel connect
GND、OUT、COM;
every two channel OUT, COM port is for GND;
2.1.3 Alarm input port
4chanel alarm input, the mode of alarm input is no restriction (possible is normal open also normal close);
the GND alarm detector connect to COM under parallel connection (the power of alarm detector supply by external power supply;
the ground terminal of alarm detector join-up in parallel with DVR;
the NC of alarm detector connect with the input end (alarm) of DVR;
when you want to reset the remote alarm of triggered , the +12V power supply of alarm detector supply by DVR, for example, smoke detector.
When you select the external power supply, please share the GND with DVR;
Alarm input circuit:
Alarm inlet connection:
2.1.4 Alarm output port

7
4 way switching value alarm output, selectable in normally open contact, also selectable in normally closed contact, the external alarm
device should be
need Vcc;

8
Chapter Three Operation
3.1 Operation instruction
3.1.1 Remote controlAND Front panel keypad
Table：
S/
N
KEYpad
Name
Operating
instruction
S/
N
Keypad
Name
Operating
instruction
1
【POWER】
Power ON/OFF
8
【ENTER 】
【OK】
This button is used
as“enter”and“ok” key in most
circumstances
2
【MENU】
Access main menu
3
【ESC】
Exit operation or enter upper
menu
Close soft keyboard
Close current window
Exit from current control
Return to last menu
Exit from PTZ control under
preview state
9
【PTZ】
Access/exit from PTZ control
under preview state
4
【 】
Slow playback,1/2×, 1/4×,
1/8× and single frame play
10
【+/-】
Volume or number
increase/reduction Select item
of the list
5
【 】
Fast playback, 2×,4× and 8×
playback
11
【ZOOM
IN/OUT】
Lens control
12
【0~9 10+】
Digital input Corresponding;
Channel is magnified in full
screen under preview state
13
【FN】
Short cut
6
【 】
Playback stop
14
【 】
Switching of
1/4/8/9/16/24/32Preview mode
【 】
Play / Pause
15
【ALARM】
Alarm reset
【▲.▼.
】
Four-way to move the focal
point in main menu, up and
down to move in the normal
window, to control pan driver

9
to move in
the PTZ control windows
【REC】
To mode of recording
16
【CLEAR】
Clear alarm
7
【SEARCH】
Search for playback time
choosing
3.1.2 How to use mouse of DVR (for right hand mouse)
1
Left key single click
To any function menu icon click the mouse left key into the menu
To run the control point out operation
Change again select frame or motion detection piece mode
Click the assemble frame popping to pull down the list
In the input frame, can select digit, character, lowercase, block letter, left click
mouse on the keyboard of character input, that’s. ← say move back, ＿say
blank，Shift say switch case .
2
Right click mouse
Right click mouse, popping the shortcut menu, as follows;
。
Through the menu can be switching preview screen window mode, start
replays, PTZ control. Four pictures playback mode, the point of the right mouse
button, Can in a single picture, four pictures, eight pictures (8 road playback), 16
screen (16 road playback), twenty four picture,thirty two picture,
broadcast control switch view show or hide broadcast control bar.
3
Double click left
button
To run the ActiveX Control ActiveX special operation, For example, double click
the certain item of record listed file, then the system will playback the segment
record video.
4
Dragging the mouse
Depress the left key and dragging the mouse, banding select Motion detection
area, depress right key of mouse and Dragging, cancel the banding select area.
Dragging playback ProgressBar back and forth to dolly moves, to achieve the
playback position adjustment. Dragging the audio and video regulation
parameter bar dolly moves, to achieve the parameter adjustment.
3.2 Power On
Boot-strap
If【POWER】pilot lamp off, please follow the operation step by step:
First step: if the power does not plug into, please plug into the power, then the DVR begin to start, by now, if the DVR still inactive, to enter the next step;
Second step: turn on the power supply of the DVR at the back panel, DVR begins to start.
If【POWER】pilot lamp to offer RED, press the 【POWER】key, DVR begins to start.
The video output mode of DVR ’s the default setting is multi picture channel mode after starting the DVR , if the time of start the DVR is in the Timing Recording
Setting, the DVR will automatically to start the Timing Recording function, the corresponding channel’s recording pilot lamp will be light, the DVR is normal operation.