Congatec Conga-qkit User manual

Table of contents

Other Congatec Microcontroller manuals

Congatec

Congatec SMARC conga-SMX8-X User manual

Congatec

Congatec conga-SKIT User manual

Congatec

Congatec conga-CAM/MIPI User manual

Congatec

Congatec conga-SMX8-Mini User manual

Congatec

Congatec conga-SKIT/ARM i.MX8 User manual

Congatec

Congatec conga-QKIT/x86 User manual

Congatec

Congatec conga-SKIT/APL User manual

Congatec

Congatec conga-SBM3 User manual

Popular Microcontroller manuals by other brands

Microsemi

Microsemi IGLOO nano Starter Kit user guide

GOWIN

GOWIN DK START GW1NSR-LV4CQN48PC7I6 V 1.1 user guide

HETRONIC

HETRONIC ERGO-S Service manual

Laird

Laird BL654PA user guide

Novatek

Novatek NT6861 manual

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM user guide

Nuvoton

Nuvoton ISD61S00 ChipCorder Design guide

STMicrolectronics

STMicrolectronics ST7 Assembler Linker user manual

Texas Instruments

Texas Instruments Chipcon CC2420DK user manual

NEC

NEC 78GK0S/K 1+ Series Application note

Mikroe

Mikroe SEMITECH N-PLC Click Application note

Intel

Intel Agilex user guide

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE manual

Texas Instruments

Texas Instruments TMS320F2837 D Series Workshop Guide and Lab Manual

CYPRES

CYPRES CY14NVSRAMKIT-001 user guide

Espressif Systems

Espressif Systems ESP8266EX Programming guide

Abov

Abov AC33M8128L user manual

Silicon Laboratories

Silicon Laboratories C8051F800 user guide

Copyright © 2013 congatec AG conga-QKITq01 1/5

conga-QKIT

congatec Qseven Mobility Starter Kit

Quick Start Guide

Downloaded from Arrow.com.

Copyright © 2013 congatec AG conga-QKITq01 2/5

Required Parts

The diagram above shows all the parts needed for the mobility kit to function properly. The cables are described in the next section.

Downloaded from Arrow.com.Downloaded from Arrow.com.

Copyright © 2013 congatec AG conga-QKITq01 3/5

Cable Denition

The following cables are required to setup a functional system “out of the box”.

Fig 2: Control Cable for conga-SBM3 and QMCB (PN: 14000076)

Fig 4: conga-SBM3 Power output cable (PN: 14000075)

Fig 6: Display Backlight Cable (PN: 48000028)

Fig 7: conga-SBM3 optional Power Input Cable (PN: 14000077)

Fig 8: SATA Power Cable (PN: 14000032)

Fig 1: USB cable for touchcontroller TSC-34 (PN: 14000087)

Fig 3: Battery cable for conga-SBM3 (PN: 14000080)

Fig 5: Display Data Cable (PN: 48000027)

Optional Cables

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Copyright © 2013 congatec AG conga-QKITq01 4/5

Step 1: Connection on conga-QMCB (PN: 020731). Module

already installed heatspreader Step 3: Connection on smart battery (PN: 10000094)

Step 2: Connection on conga-SBM3(PN: 025482)

How To Connect

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Copyright © 2013 congatec AG conga-QKITq01 5/5

Step 4: Connection on display (PN: 10000094). Located at the back

of the display

The mobility kit is now connected and ready to boot. Press the

power button on the conga-SBM3 to boot the system.

For more information about the conga-QAF, conga-QEVAL or the

conga-SBM3, visit congatec AG website at www.congatec.com for

the respective user’s guide.

Additional Information

Step 5: Connection on USB touch controller (PN: 10000103)

Step 6: Connect USB touch controller (PN: 10000103) to the

conga-QMCB (PN: 020731)

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.