Congatec conga-SBM3 User manual

Copyright © 2013 congatec AG conga-QSMKITq11 1/5
conga-SBM3
Qseven Mobility Starter Kit
Quick Start Guide

Copyright © 2013 congatec AG conga-QSMKITq11 2/5
Required Parts
The diagram above shows all the parts needed for the mobility kit to function properly. The cables are described in the next section.

Copyright © 2013 congatec AG conga-QSMKITq11 3/5
Cable Denition
The following cables are required to setup a functional system “out of the box”.
Fig 2: Control Cable for conga-SBM3 and QMCB (PN: 14000076)
Fig 4: conga-SBM3 Power output cable (PN: 14000075)
Fig 6: Display Backlight Cable (PN: 48000028)
Fig 7: conga-SBM3 optional Power Input Cable (PN: 14000077)
Fig 8: SATA Power Cable (PN: 14000032)
Fig 1: USB cable for touchcontroller TSC-34 (PN: 14000087)
Fig 3: Battery cable for conga-SBM3 (PN: 14000080)
Fig 5: Display Data Cable (PN: 48000027)
Optional Cables

Copyright © 2013 congatec AG conga-QSMKITq11 4/5
Step 1: Connection on conga-QMCB (PN: 020731). Module
already installed with cooling solution Step 3: Connection on smart battery (PN: 10000094)
Step 2: Connection on conga-SBM3(PN: 025482)
How To Connect

Copyright © 2013 congatec AG conga-QSMKITq11 5/5
Step 4: Connection on display (PN: 10000094). Located at the back
of the display
The mobility kit is now connected and ready to boot. Press the
power button on the conga-SBM3 for approximately 1 second to
boot the system.
For more information about the conga-QA3, conga-MCB/Qseven or
the conga-SBM3, visit congatec AG website at www.congatec.com
for the respective user’s guide.
Additional Information
Step 5: Connection on USB touch controller (PN: 10000103)
Step 6: Connect USB touch controller (PN: 10000103) to the
conga-QMCB (PN: 020731)

Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
congatec:
conga-Qseven/SBM3 - Mobility Starter Kit